All

Cateye Taillight Asy 12V LED Flat Back For Universal Mount Die Cast Chrome Plated

• Available in your choice of the original bulb type or the updated LED (light emitting diode) type
• The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 LEDs for the brake/taillight and 3 LEDs for the license light
• LED lights are not affected by vibration or moisture and have an incredible life span
• The LED lights do not produce any heat and draw only 11.25 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These assemblies include a die cast housing, plastic lens, frosted license plate illumination lens and lead wires
• The flat back housing includes mounting studs on 2 centers

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated LED type Taillight
(Imported)

RUSS WERNIMONT DESIGNS Cat-Eye Capsule Light, Taillight/Turn Signal, LED, Dual function, Red, made in the usa, Each, Rear, Universal

• Dual-function LED taillight with 3-pulse brake light and amber LED turn signals
• Custom mounting required; no mount or hardware included
• Not DOT certified
• Made in the U.S.A.

RUSS WERNIMONT DESIGNS LED Cat-Eye Taillight/Turn Signal, Dual function, Red, made in the usa, Each, Rear, Universal

• Dual-function LED taillight with 3-pulse brake light and LED turn signals
• Includes a raw, weld-in-pocket, wiring harness and instructions
• Can be used on OEM fenders, custom fenders or various custom applications
• Measures approximately 67/8" L x 33/8" W x 3/4" D
• Made in the U.S.A.

Skull Cateye Taillight Red Lens/Clear Skull Chrome

• LED type taillight includes 33 red LEDs for the brake/running light function and 6 separate white LEDs to illuminate the license plate
• Die cast housing features a four step design
• lat backed housing for custom use mounts on 2 centers

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Skull Cateye Taillight (bulb type)

Skull Cateye Taillight Univ Mt W/Clear Skull/Red Lens Cp Die Cast 4 Step Housing

• LED type taillight includes 33 red LEDs for the brake/running light function and 6 separate white LEDs to illuminate the license plate
• Die cast housing features a four step design
• lat backed housing for custom use mounts on 2 centers

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Skull Cateye Taillight (LED type)

Taillight Lens,Red Cateye Type Fits #11220,#11221,#11240 & #11241 Only

• License plate mount is constructed from lightweight aluminum
• Taillight is manufactured from ABS plastic
• Taillight mounts on 2 centers, measures 6 1/2 long x 1 3/4 wide x 1 3/4 tall
• License mount fits flat or curved fenders
• License mount includes mounting gasket
• 19 LEDs used in taillight, 4 LEDs used for license plate light
• 12 volt applications
• Includes mounting hardware

Note: These taillight assemblies are not DOT approved and should be used accordinglyV-FACTOR
Replacement Taillight Lens for 11220, 11221, 11240 & 11241

Taillight,Custom Small Cateye 12V Bulb Type Flat Back 2" Mtg Centers Abs Plastic Housing Cp

• License plate mount is constructed from lightweight aluminum
• Taillight is manufactured from ABS plastic
• Taillight mounts on 2 centers, measures 6 1/2 long x 1 3/4 wide x 1 3/4 tall
• License mount fits flat or curved fenders
• License mount includes mounting gasket
• 19 LEDs used in taillight, 4 LEDs used for license plate light
• 12 volt applications
• Includes mounting hardware

Note: These taillight assemblies are not DOT approved and should be used accordinglyV-FACTOR
Chrome Plated Bulb type Tailight only

Taillight/Lic Mt Small Cateye 12V Bulb Type Uw/Cus Fdr,Abs Lt Housing Cp,Alum Lic Mt Pol

• License plate mount is constructed from lightweight aluminum
• Taillight is manufactured from ABS plastic
• Taillight mounts on 2 centers, measures 6 1/2 long x 1 3/4 wide x 1 3/4 tall
• License mount fits flat or curved fenders
• License mount includes mounting gasket
• 19 LEDs used in taillight, 4 LEDs used for license plate light
• 12 volt applications
• Includes mounting hardware

Note: These taillight assemblies are not DOT approved and should be used accordinglyV-FACTOR
Chrome Plated Bulb type Taillight & Aluminum License Mount Kit

Taillight/Lic Mt Small Cateye LED Type Uw/Custom Fdr,Abs Lt Housing Cp,Alum Lic Mt Pol

• License plate mount is constructed from lightweight aluminum
• Taillight is manufactured from ABS plastic
• Taillight mounts on 2 centers, measures 6 1/2 long x 1 3/4 wide x 1 3/4 tall
• License mount fits flat or curved fenders
• License mount includes mounting gasket
• 19 LEDs used in taillight, 4 LEDs used for license plate light
• 12 volt applications
• Includes mounting hardware

Note: These taillight assemblies are not DOT approved and should be used accordinglyV-FACTOR
Chrome Plated LED type Taillight & Aluminum License Mount Kit

V-Twin Manufacturing Cat Eye Taillamp, 12Volt, Fender Mount - Sold Each

Chrome 12 volt cat eye tail lamp is for fender mounting.
*NOTE: For show or decorative use only and are not D.O.T. approved.

Custom application

V-Twin Manufacturing CAT Face TAILAMP - Sold Each

Red cat face tail lamp with 12 volt 23/8 watt bulb, and mounts on flat plate.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Cateye Assembly Kit for Chrome Deco Taillight Mount, 1980-99 WG-ST - Kit

Chrome cateye lamp assembly kit with deco plate bracket.
*NOTE: For show or decorative use only and are not D.O.T. approved.

FXWG 1980-1985
FXST 1984-1998

V-Twin Manufacturing Chrome ABS Big Eye LED Tail Lamp - Sold Each

Chrome ABS big eye LED lamp with clear lens and red LED.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

Measurements:

Length: 6-1/2"
Width: 2"
Height: 2"

V-Twin Manufacturing Chrome Billet Fender Mount LED Tail Lamp with Clear Lens - Sold Each
Chrome Billet Fender Mount LED Tail Lamp with Clear Lens Chrome billet tail lamp assembly with clear lens features and LED array. An LED array is much brighter than the 1157 bulb normally used in tail lamps. Fender mount style sits 4.5" x

V-Twin Manufacturing Chrome Billet Oval LED Tail Lamp - Sold Each

Chrome billet 12 volt oval LED tail lamp.

Custom application

Measurements:

Height: 1-1/4"
Width: 2-3/8"

Tech Note:

Suggested to use with #33-0655 LED array

V-Twin Manufacturing Chrome Cateye Stepped Design Tail Lamp - Sold Each
Chrome Cateye Stepped Design Tail Lamp Cateye LED lamp chrome features smooth clear lens with red LED board installed. Chrome body has stepped design. Includes an extra red pair of lenses. *NOTE: D.O.T approved. Fits: Custo

V-Twin Manufacturing Clear Mini-LED Cat Eye Taillamp - Sold Each

Clear mini cat eye lamp kit features 15 LED in a 4-1/2" wide x 1" tall lamp. Kit includes an clear lens, red LED and an 6-3/4" wide alloy plate mount.
*NOTE: For show or decorative use only and is not D.O.T. approved. ECE approved

Custom appl

V-Twin Manufacturing Complete LED Light for Chrome Cat Eye Taillight - Sold Each

Chrome 12 volt cateye LED tail lamp includes a red lens.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Custom Cateye or Diamond Taillight Bracket, 1980-99 FXWG-FXST - Sold Each

Chrome bracket for deco style tail lamp on bobbed style rear fenders.

FXDWG 1991-1999
FXST 1984-1999

V-Twin Manufacturing Iron Cross Oval Taillight - Sold Each

Chrome LED iron cross lamp with LED design with red lens and 2 clear LEDs for plate illumination.
Mounts where any cat eye tail lamp would mount. Center to center width on the mount holes measures 2".

Custom application

V-Twin Manufacturing Lamp Only (LED) for Snake Eye Taillamp - Kit

Chrome LED snake eye lamp with alloy license plate bracket. lamp measures 16cm X 4cm.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

Measurements:

Width: 4-1/2"
Depth: 1-3/4"

V-Twin Manufacturing Large Mini Cateye Taillamp Kit - Sold Each

Chrome large cateye tail lamp with alloy mount bracket includes red lens and 12 volt 23/8 watt clear bulb.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

Measurements:

Diameter: 3"
Length:

V-Twin Manufacturing Large Mini Cateye Taillamp Only - Sold Each

Replacement chrome mini cateye tail lamp includes a red lens and a 12 volt 21/5 watt clear bulb.
*NOTE: For show or decorative use only and is not D.O.T. approved. ECE approved

Custom application

V-Twin Manufacturing LED Skull Cateye Taillight - Sold Each

Chrome 12 volt cateye skull LED lamp features classic oval design with red ground clear skull face lens.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Mini Snake Eye License Plate & Bracket, 1980-99 ST - Kit

Chrome snake eye style tail Lamp with license plate bracket kit. Kit includes a red lens and a 12 volt 23/8 watt clear bulb.
*NOTE: For show or decorative use only and is not D.O.T. approved.

FXST 1984-1998

V-Twin Manufacturing Mini Snake Eye Taillight Only, 1980-99 ST - Sold Each

Chrome snake eye tail lamp includes a 12 volt 23/8 watt clear bulb and a red lens.
Order bracket separately. Tail lamp is 6-1/2" wide, 1/2" long and 1-1/2" tall. *NOTE: For s

V-Twin Manufacturing Oval Chrome Taillamp Clear - Set

Chrome clear dual LED lamp with visor, red LED running, stop light and amber LED turn signal.
*NOTE: For show or decorative use only and is not D.O.T. approved. ECE approved

Custom application

V-Twin Manufacturing Oval Chrome Taillamp w-turn signal - Sold Each

Chrome clear lens dual LED lamp with visor, red LED running, stop light and mount gasket.
*NOTE: For show or decorative use only and is not D.O.T. approved. ECE approved

Custom application

V-Twin Manufacturing Plain Red Lens Chrome Cat Eye Taillight - Sold Each

Red cateye style tail lamp lens made of heavy die cast.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Replacement application for cat eye tail lamps

V-Twin Manufacturing Radii Chrome Oval Taillight Assembly, 1980-99 WG-ST - Kit

Chrome oval Radii LED lamp with built in amber LED turn signals and plate bracket.
*NOTE: For show or decorative use only and are not D.O.T. approved.

FXST 1984-1998
FXWG 1980-1985

V-Twin Manufacturing Red Bulb Chrome Big Eye Taillight - Sold Each

Chrome ABS big eye tail lamp with red lens and 2 12 volt 21/5 watt bulbs.
*NOTE: For show or decorative use only and is not D.O.T. approved. ECE approved

Custom application

V-Twin Manufacturing Side Mount Tail Lamp Kit Cateye Style, XL, 2004-Up - Kit

Cateye style side mount tail lamp kit mounts vertically

XL 2004-UP