All

Brake Hose Fitting,Str End Uw/Goodridge -2 Bss Brk Hose Stainless Steel P6001-02-03C

• The small O.D. (.200) of this -2 (dash two) brake hose provides a firmer feel at the brake lever and is easier to run through the handlebar if desired
• or best results use our 40202 ferrule installation tool
• See below for compatible fittings

Goodridge
Unpolished Stainless Steel
Straight ³/₈-24 Hose Adapter itting

Brake Part,Adapter Fitting Cp 1/8" Npt Male/#3 Straight Male Chromed Goodridge 816-03Ch

• Universal brake lines are the perfect solution for any brake or clutch line fitment for any bike
• Hose features clear or black PVC coating, PTE inner liner, and premium stainless steel braided armor
• PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
• PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158 degrees to 500 degrees, and shields brake systems from moisture, unlike other materials like nylon
• Stainless steel braid is superior in pressure rating, flame resistance, and volumetric expansion to all other materials, including Kevlar, resulting in unmatched stopping power
• All hardware is beautifully chromed mild steel with a 96 hour salt spray rating
• Best when used with Goodridge universal adapters Goodridge
  Chrome Plated Straight ¹/₈ NPT
  ³/₈-24 Adapter itting

Brake Part,Hose End Reusable 3/8"-24 Union Chrome Plated Goodridge 815-03Ch

• Universal brake lines are the perfect solution for any brake or clutch line fitment for any bike
• Hose features clear or black PVC coating, PTE inner liner, and premium stainless steel braided armor
• PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
• PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158 degrees to 500 degrees, and shields brake systems from moisture, unlike other materials like nylon
• Stainless steel braid is superior in pressure rating, flame resistance, and volumetric expansion to all other materials, including Kevlar, resulting in unmatched stopping power
• All hardware is beautifully chromed mild steel with a 96 hour salt spray rating
• Best when used with Goodridge universal adapters Goodridge
  Chrome Plated #3 Union

Brake Part,Hose End Reusable Straight #3 Hose End Chromed Cp.....6001-03Ch
Goodridge cut to length #3 braided stainless steel brake/hydraulic clutch hose is designed to outperform the OE style rubber hose by not expanding under pressure. It will give you a more positive feel at the lever while providing a greater degree of safety. or improved fluid transfer, the smooth bore inner liner is made of P.T..E. (the same slick material used on frying pans) and is compatible with any type of brake fluid. All parts in this system are reusable, easy to assemble and chrome plated unless indicated otherwise. All reusable ends include a brass ferrule. Use tool 40200 to simplify installation of the brass ferrule.Goodridge
Chrome Plated Straight itting
Use with ³/₈-24 #3 Male itting
(Imported)

Brk Hose Fitting,Straight 10Mm Banj0,Uw/Goodridge -2 Bss Brk Hose, Ss 5092-02-03C

• The small O.D. (.200) of this -2 (dash two) brake hose provides a firmer feel at the brake lever and is easier to run through the handlebar if desired
• or best results use our 40202 ferrule installation tool
• See below for compatible fittings

Goodridge
Polished Stainless Steel 10 mm Straight Banjo End for direct hose connection
(Imported)

DRAG SPECIALTIES Chrome Universal Brake Fitting, 12mm, AN #3, Straight

• Top-quality clear-coated stainless steel-braided or black vinyl-coated stainless steel/braided brake lines, banjo bolts, brake line fittings and crush washers provide consistent, reliable performance
• Lines are available in 9" through 80" lengths
• Feature chrome-plated AN-3 ends
• Meet DOT MVSS-106 specifications
• Banjo bolts and fittings are chrome-plated steel and sold separately
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Universal Brake Fitting, size 7/16"-24

• Universal, black 3/16" o.d. nylon brake lines; ideal for custom fabrication
• Semi-rigid nylon construction offers unparalleled flexibility, allowing the builder ultimate control
• Compression-type chrome fittings with unique concave design
• Line and fittings also work great for custom hydraulic clutch applications
• For off-road and show use only; not DOT compliant
• Fittings made from steel, not brass
• Line and fittings sold separately
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Universal Brake Fitting, Straight

• Universal, black 3/16" o.d. nylon brake lines; ideal for custom fabrication
• Semi-rigid nylon construction offers unparalleled flexibility, allowing the builder ultimate control
• Compression-type chrome fittings with unique concave design
• Line and fittings also work great for custom hydraulic clutch applications
• For off-road and show use only; not DOT compliant
• Fittings made from steel, not brass
• Line and fittings sold separately
• Made in the U.S.A.

GOODRIDGE Chrome Universal Brake Line Fitting, Harley 84-99 FX 86-99 FL
GOODRIDGE Chrome Universal Brake Line Fitting, Harley 84-99 FX 86-99 FL

GOODRIDGE Ebony Universal Brake Line Fitting, Inverted Flare, Straight, Black, Zinc-plated, Steel, 3/8"-24, Male AN#3
GOODRIDGE Ebony Universal Brake Line Fitting, Inverted Flare, Straight, Black, Zinc-plated, Steel, 3/8"-24, Male AN#3

GOODRIDGE Polished Stainless Steel Universal Brake Line Fitting, Inverted Flare, Straight, fitting. -3 AN x 3/8"- 24, made in the USA

Hide-A-Line Adapter Fitting Straight 3/8-24 To #3,If,Ss For -2 Line 815-03Vc

• The small O.D. (.200) of this -2 (dash two) brake hose provides a firmer feel at the brake lever and is easier to run through the handlebar if desired
• or best results use our 40202 ferrule installation tool
• See below for compatible fittings

Goodridge
Stainless Straight Inverted lair
³/₈-24 Adapter itting
(Imported)

Pro II Brk Sys Come Ferrule Vw45776/788 Fittings Only Brass Russell R49009

• Russell's Pro System II hose and fittings are designed for custom builders that need to easily fabricate brake or hydraulic clutch lines
• The cut to length semi-rigid black nylon hose has a ³/₁₆ O.D. for a low impact custom look yet provides improved braking effect with the same lever pressure as OE size hose. Hose is not DOT approved
• The chrome plated steel compression fittings (sold separately) are available to replace ³/₈-24 & ⁷/₁₆-24 banjo bolts as listed. The ¹/₈-27 NPT compression fittings are designed for early style or custom brake hoses drilled and tapped for pipe thread
• The 45870 male adapter end is designed for use with -3 male adapter banjo ends or brake tees found in the control section when required

Russell
Replacement Compression errules, Pack of 10

Pro II Sys Brk Fitting Strt Cp Uw #49510 Brake Hose 3/8-24 Male Thread Russell R4342C

• Russell's Pro System II hose and fittings are designed for custom builders that need to easily fabricate brake or hydraulic clutch lines
• The cut to length semi-rigid black nylon hose has a ³/₁₆ O.D. for a low impact custom look yet provides improved braking effect with the same lever pressure as OE size hose. Hose is not DOT approved
• The chrome plated steel compression fittings (sold separately) are available to replace ³/₈-24 & ⁷/₁₆-24 banjo bolts as listed. The ¹/₈-27 NPT compression fittings are designed for early style or custom brake hoses drilled and tapped for pipe thread
• The 45870 male adapter end is designed for use with -3 male adapter banjo ends or brake tees found in the control section when required

Russell
³/₈-24 Straight itting
Replaces ³/₈ Banjo
Not designed for Sportster 2004/Later

Pro II Sys Brk Fitting Strt Cp Uw #49510 Brake Hose 7/16-24 Male Thread Russell R4343C

• Russell's Pro System II hose and fittings are designed for custom builders that need to easily fabricate brake or hydraulic clutch lines
• The cut to length semi-rigid black nylon hose has a ³/₁₆ O.D. for a low impact custom look yet provides improved braking effect with the same lever pressure as OE size hose. Hose is not DOT approved
• The chrome plated steel compression fittings (sold separately) are available to replace ³/₈-24 & ⁷/₁₆-24 banjo bolts as listed. The ¹/₈-27 NPT compression fittings are designed for early style or custom brake hoses drilled and tapped for pipe thread
• The 45870 male adapter end is designed for use with -3 male adapter banjo ends or brake tees found in the control section when required

Russell
⁷/₁₆-24 Straight itting
Replaces ⁷/₁₆ Banjo
Not designed for Sportster models 2004/Later

Pro Sys Brk Fitting Strt Cp Uw#49510 Brk Hose 1/8-27 Npt Male Thread Russell R4340C

• Russell's Pro System II hose and fittings are designed for custom builders that need to easily fabricate brake or hydraulic clutch lines
• The cut to length semi-rigid black nylon hose has a ³/₁₆ O.D. for a low impact custom look yet provides improved braking effect with the same lever pressure as OE size hose. Hose is not DOT approved
• The chrome plated steel compression fittings (sold separately) are available to replace ³/₈-24 & ⁷/₁₆-24 banjo bolts as listed. The ¹/₈-27 NPT compression fittings are designed for early style or custom brake hoses drilled and tapped for pipe thread
• The 45870 male adapter end is designed for use with -3 male adapter banjo ends or brake tees found in the control section when required

Russell
¹/₈-27 NPT Straight itting

RUSSELL Chrome Pro System I Fitting, Straight, size -3

• Allow custom fabrication of brake lines without the requirements of secondary adapters
• Unique extruded cover eliminates the age-old problem of abrasion to painted surfaces
• Hose end design ensures positive seal due to the separation of the sealing function from the hose end retention feature
• Lightweight, high-pressure assembly not only enhances appearance, but delivers the ultimate in pressure performance
• Replacement olives allow reuse of existing fittings
• Bulk line is available with clear coating or smoke-tint coating
• Smoke tint matches Barnett clear coating on cables
• -3 straight hose end for brake line connections
• Designed to ensure a positive seal
• Use with Pro System 1 braided hose only
• Perfect for master cylinder, junction block and caliper connections
• Easy assembly
• Made in the U.S.A.

RUSSELL Chrome Pro System II Fitting

• Universal line is manufactured from a semi-rigid nylon material; allows maximum flexibility
• Compression-type chrome or black fittings are easily attached
• Line and fittings are sold separately
• Replacement olives allow reuse of existing fittings
• Chrome plated and Renegade black steel fittings sold separately
• Made in the U.S.A.

V-Twin Manufacturing 1/8"Male NPT Straight Adapter Fitting XL - Sold Each

Chrome 1/8" male adapter fitting with straight end adapts to straight male National Pipe Thread.

Custom application

V-Twin Manufacturing Accel Hydraulic Brake Switch w/Flag, XL - Sold Each

Accel hydraulic brake switch with flag style connector featu res heavy duty contacts and quality brass terminals.

OEM: 72023-51A

FL 1951-1984
FXST 1984-1994
FLST 1986-1994
FXR 1991-1994
XL 1979-1994

V-Twin Manufacturing Brake Hose Fitting, XL - Sold Each

Front master cylinder brake hose fitting converts 10mm late threads to 1/8" NPT with inverted flare, early thread hose type, straight.

Custom application

V-Twin Manufacturing Chrome F Master Cylinder Angle Line Fitting XL - Sold Each

Chrome angle fitting for the brake hose to the front master cylinder.

OEM: 43307-78

FL 1972-1981
XL 1972-1981

V-Twin Manufacturing Flare Union, Chrome XL - Sold Each

Chrome brake hose flare union adapter fitting.

Custom application

V-Twin Manufacturing Male Fitting, Chrome 3/8-24, (2 Pk) XL - PR

Chrome 3/8"-24 male inverted flare, straight brake hose fittings.
Sold as a pair.

Custom application