All

Belt Drive Part,Inner Cl Hub Bt Evo 1984/89 Bdl Systems W/Tapered Hub 8Mm Bdl Ev-170

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

G) Inner Clutch Hub. Fits 77017 and 77005.

Belt Drive Part,Inner Cl Hub Bt Evo 1990/L* Bdl Systems W/Splined Hub 8Mm Bdl Ev-180

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

G) Belt Drives Ltd.
Inner Clutch Hub w/Retaining Ring, Fits 77031, 77023, 77025 & 77034

Belt Drive Part,Pulley Covers Fits Bdl 3" Open Drives Ex Sh Pol Alum W/Hardware Md-100

• Baby moon style.
• Polished aluminum.
• Offers better protection and reducees clutch noise.
• Includes special tape for permanent installation and button head bolts if you choose to drill and tap hub for easy on and off access.

Polished aluminum pulley covers, includes double stick tape and screws for mounting. Fits 5 speed 3 open drives (Softail 1986/Later, FLT 1990/Later and FXR 1990/1994).

Belt Drive Part,Rr Pulley 8Mm 3" W/Brg,Str Gear & Round Cl Dogs See Catalog For Fit 72-3E

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

E) Round Dog Drive Rear Pulley with Bearing and Starter Gear, 3 wide. 72 teeth fits 77025, 77026, 77201 & 77034.

Belt Drive Pri & Cl Kit 8Mm 1-5/8" Belt St L85/89 W/Kevlar Belt Bdl Evb-2T
Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited. Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stressproof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized. Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required. Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. or replacement parts, see the drive train section for clutch or starter ring gear.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.Belt Drives Ltd.
1 ⁵/₈ wide Belt Drive Kit with Clutch
Fits Softail Late 1985/1989 with taper clutch hub and rear belt drive, 45-68 tooth combo

Belt Drive Pri & Cl Kit 8MM Softail & Dyna 5 Spd 1990/20061-5/8" Belt

Evbb-2Sl

Chuck the chain and bolt in the belt for a smoother ride with this 8mm Enclosed Primary Belt Drive Kit from Belt Drive Limited. Designed for use without modification to the inner primary cover, these bolt-in kits feature cylindrical shaped, replaceable round clutch dogs which can withstand 1200 pounds of torque. The inner stress proof steel hub is designed to move the weight of the clutch basket inward over the mainshaft 1 which distributes the weight more evenly on the mainshaft. To ensure a low rotating weight and provide long life, both the front and rear pulleys are made of lightweight aluminum and are hard anodized.

Rounding out these kits are a set of Kevlar^® clutch plates that provide 60% more surface area than the OE clutch and a Kevlar^® belt for positive performance. If more clutch plate pressure is needed, the pressure plate is designed to accept up to 6 more clutch springs if required.

Each kit includes a sealed primary bearing (except kit 77028). A primary bearing seal is also included for those who don't want to change the OEM non-sealed style bearing. Change over today for a smoother, quieter ride. or replacement parts, see the drive train section for clutch or starter ring gear.

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

Note: No modification is required to the inner primary for installation.Belt Drives Ltd.
1 ⁵/₈ wide Belt Drive Kit with Clutch
Fits Softail & Dyna 5 speed models 1994/2006 with spline clutch hub, 45-68 tooth combo
* Includes the earlier style heavy duty 66 tooth starter ring gear and a matching 9 tooth starter pinion gear

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.
Belt Drives Ltd.
2" Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1955/1984 with splined engine sprocket shaft fits 77009

Belt Guard, Chrome Plated Fits 1997-2008 Touring Models Hd# 60491-02A
V-FACTOR
Chrome Plated Belt Guard
Fits Touring Models 1997/2008
Replaces HD# 60491-02A
(Imported)

Belt Guard,Chrome Plated Fits 2009/L* Touring Models Hd# 60408-09
V-FACTOR
Chrome Plated Belt Guard
Fits Touring Models 2009/Later
Replaces HD# 60408-09
(Imported)

Belt Guard,Lower Chrome Plated Fxr Flt Flht Flhs 1985/Later Replaces Hd 60397-85A
Made of chrome plated steel and designed for easy bolt-on installation. Duplicate of OEM parts.Lower Belt Guard fits all FXR and FLT, FLHT, FLHS 1985/Later. (Imported)

Belt Guard,Lower Chrome Plated Softail 86/99 W/70T Rr Pulley Rpls Hd 60362-86A & 60366-89A
V-FACTOR
Chrome Plated Lower Guard
Fits Softail 1985/1999 with 70 tooth pulley
Replaces HD# 60362-86A & 60366-89A
(Imported)

Belt Guard,Upper Chrome Plated Big Twin 4 Spd 1980/L (Ex St) Rpls Hd60380-79 & Hd60388-82
Made of chrome plated steel and designed for easy bolt-on installation. Duplicate of OEM parts.Upper Belt Guard fits all Big Twin 4 speed models 1980/Later. (Imported)

Belt Guard,Upper Chrome Plated Fxr Models 1987/Later Rpls Hd60297-87A Hd91739-87A
Made of chrome plated steel and designed for easy bolt-on installation. Duplicate of OEM parts.Upper Belt Guard fits all FXR 1987/Later. (Imported)

Belt Guard,Upper Custom Shorty Softail 1986/1999 With 70T Rear Pulley Chrome Plated
Designed to show off more of your expensive rear pulley, this full width chrome plated steel belt guard has been reinforced in the critical areas for years of trouble free service and show stopping good looks. Guard covers 15 of the belt and includes mounting hardware. Fits Softail Models 1986/1999 with 70 tooth rear pulley. (Imported)

Belt Guard,Upper Shorty Style Softail 1986/1999 With 70T Rear Pulley Chrome Plated
Whether you just want to clean up the appearance of your rear end or want to show off that custom rear pulley, use this stylish chrome plated 7 long Shorty upper belt guard. Fits all Softail 1986/1999 with 70 tooth rear pulley. (Imported)

Bendix Carb Part, Pump & Boot Bendix/Zenith 36,38 & 40 Mm Replaces HD 27762-71A

• The pump shaft roll pin can be installed in 3 different positions for the amount of fuel desired to be squirted into the throat of the carburetor body per stroke of the accelerator pump
• The highest setting squirts the largest amount of fuel

V-FACTOR
Fits all Bendix/Zenith carburetors
Replaces HD# 27762-71A

Bendix Carb Part, Rebuild Kit Bendix/Zenith 36,38 & 40Mm Replaces Hd 27132-71

• This kit includes all the parts necessary to properly rebuild your Bendix/Zenith carburetor to factory specifications
• Kit includes a three way adjustable accelerator pump

V-FACTOR
Fits all 36mm, 38mm and 40mm Bendix/Zenith carburetors
Replaces HD# 27132-71

Big Bore Kit, S & S 106" Kit Fits 2007/2012 Twin Cam Black Powdercoat, 910-0206

• Go from 96 to 106 for 2007-2012 Big Twins or go from 88 to 97 for 1996-2006 Big Twins
• Largest bore that we feel can safely be used in a cylinder with a stock spigot diameter
• Bolt-on 9 to 10 cubic inches - cylinders do not require crankcase machining to install
• Increased fin area for better heat dissipation
• orged coated pistons are compatible with stock or S & S Super Stock^® 79cc & 89cc heads
• Valve pocket recessed in S & S pistons are enlarged for oversize valves and higher lift cams
• 11 fins and full fin pattern on cam side closely resembles OEM shape
• S & S logo and part numbers are less conspicuous
• Silver powder coat or wrinkle black powder coat cylinder finish color matches Harley-Davidson^® finish

Kit Contains:

• Piston set with rings
• Top end gasket kit
• S & S cylinders with gaskets
• Installation instructions

S & S
Wrinkle Black Powder Coat Finished Bore Kit
Fits Big Twin models 2007/2012
96 to 106 Displacement

Big Bore Kit,S & S 97" Kit Big Twin 1999/2006 Black Powder Coat,S & S 910-0205

• Go from 96 to 106 for 2007-2012 Big Twins or go from 88 to 97 for 1996-2006 Big Twins
• Largest bore that we feel can safely be used in a cylinder with a stock spigot diameter
• Bolt-on 9 to 10 cubic inches - cylinders do not require crankcase machining to install
• Increased fin area for better heat dissipation
• orged coated pistons are compatible with stock or S & S Super Stock^® 79cc & 89cc heads
• Valve pocket recessed in S & S pistons are enlarged for oversize valves and higher lift cams
• 11 fins and full fin pattern on cam side closely resembles OEM shape
• S & S logo and part numbers are less conspicuous
• Silver powder coat or wrinkle black powder coat cylinder finish color matches Harley-Davidson^® finish

Kit Contains:

• Piston set with rings
• Top end gasket kit
• S & S cylinders with gaskets
• Installation instructions

S & S
Wrinkle Black Powder Coat Finished Bore Kit
Fits Big Twin models 1999/2006
88 to 97 Displacement

Big Bore Kit,S & S 97" Kit Big Twin 1999/2006 Silver,S & S 910-0201

• Go from 96 to 106 for 2007-2012 Big Twins or go from 88 to 97 for 1996-2006 Big Twins
• Largest bore that we feel can safely be used in a cylinder with a stock spigot diameter
• Bolt-on 9 to 10 cubic inches - cylinders do not require crankcase machining to install
• Increased fin area for better heat dissipation
• orged coated pistons are compatible with stock or S & S Super Stock^® 79cc & 89cc heads
• Valve pocket recessed in S & S pistons are enlarged for oversize valves and higher lift cams
• 11 fins and full fin pattern on cam side closely resembles OEM shape
• S & S logo and part numbers are less conspicuous
• Silver powder coat or wrinkle black powder coat cylinder finish color matches Harley-Davidson^® finish

Kit Contains:

• Piston set with rings
• Top end gasket kit
• S & S cylinders with gaskets
• Installation instructions

S & S
Silver Powder Coat Finished Bore Kit
Fits Big Twin models 1999/2006
88 to 97 Displacement

Billet Alum Fat Bar Risers 08/L* Fxdf & Cust Ap W/1-1/4" Bars,Black,Uw 1-1/4" Bars

• orged 6061-T6 billet aluminum risers and clamp for 1 ¹/₄ diameter handlebars
• 5 rise height
• See below for availability of finish

V-FACTOR
Black Powder Coat Top Clamp & Risers
Fits XD 2008/Later & custom applications
Replaces HD# 59783-08 & 56898-08
(Imported)

Billet Alum Fat Bar Risers 08/L* Fxdf & Cust Ap W/1-1/4" Handelbars,Chrome Plated

• orged 6061-T6 billet aluminum risers and clamp for 1 ¹/₄ diameter handlebars
• 5 rise height
• See below for availability of finish

V-FACTOR
Chrome Plated Top Clamp & Risers
Fits XD 2008/Later & custom applications
Replaces HD# 59783-08 & 56898-08
(Imported)

Billet Cam Support Plate Twin Cam 2007/L*, Gear Drive

• Eliminates flex
• Decreases engine temperature
• Increases air flow
• Use with Oil Pump 67089 for maximum efficiency
• Includes bearing retainer plate and hardware
• Use with gear drive cams only, unless using 67601 with 66701

V-FACTOR
Fits Twin Cam 2007/Later
(Imported)

Billet Cam Support Plate Twin Cam 99/06 Except 06 Dyna Use W #67601 If Using Chain Dr

• Eliminates flex
• Decreases engine temperature
• Increases air flow
• Use with Oil Pump 67089 for maximum efficiency
• Includes bearing retainer plate and hardware
• Use with gear drive cams only, unless using 67601 with 66701

V-FACTOR
Fits Twin Cam 1999/2006
(Imported)

Billet Forward Controls, Gma Bt 4 Spd 58/86,Softail 86/99 Black Finish, Gma-Fc-100-B

• These standard length forward controls are CNC machined from billet aluminum for superior strength and light weight
• Contoured pegs have rubber inserts for a no-slip grip
• Bronze pivot bushings and thrust washers provide smooth action with years of service
• lush mount control to frame hardware is included (3 for shift side & 2 for brake side)
• Shift side includes a 4 bolt type threaded mount for the OE style kick stand
• or proper brake pedal pressure these controls were designed for disc brakes with a caliper that requires a 5/8 bore master cylinder
• 1986 Softail models will require relocation of the oil filter
• Late X 4 speed models may require a brake side mounting tab welded to the frame

GMA
Black 5/8 Bore Kit
Fits Big Twin 4 speed 1958/1986 & Softail 1986/1999

Billet Forward Controls, Gma Bt 4 Spd 58/86,Softail 86/99 Chrome Finish, Gma-Fc-100-C

• These standard length forward controls are CNC machined from billet aluminum for superior strength and light weight
• Contoured pegs have rubber inserts for a no-slip grip
• Bronze pivot bushings and thrust washers provide smooth action with years of service
• lush mount control to frame hardware is included (3 for shift side & 2 for brake side)
• Shift side includes a 4 bolt type threaded mount for the OE style kick stand
• or proper brake pedal pressure these controls were designed for disc brakes with a caliper that requires a 5/8 bore master cylinder
• 1986 Softail models will require relocation of the oil filter
• Late X 4 speed models may require a brake side mounting tab welded to the frame

GMA
Chrome Plated 5/8 Bore Kit
Fits Big Twin 4 speed 1955/1986 & Softail 1986/1999

Billet Forward Controls, Gma Bt 4 Spd 58/86,Softail 86/99 Polished Finish, Gma-Fc-100-P

• These standard length forward controls are CNC machined from billet aluminum for superior strength and light weight
• Contoured pegs have rubber inserts for a no-slip grip
• Bronze pivot bushings and thrust washers provide smooth action with years of service
• lush mount control to frame hardware is included (3 for shift side & 2 for brake side)
• Shift side includes a 4 bolt type threaded mount for the OE style kick stand
• or proper brake pedal pressure these controls were designed for disc brakes with a caliper that requires a 5/8 bore master cylinder
• 1986 Softail models will require relocation of the oil filter
• Late X 4 speed models may require a brake side mounting tab welded to the frame

GMA
Polished Aluminum 5/8 Bore Kit
Fits Big Twin 4 speed 1958/1986 & Softail 1986/1999

Billet Handlebar Control, Gma 5/8" Bore,Front Brake M/Cyl Black Finish, Gma-Hb-4-B
GMA
Black Finish Control
Front Brake Master Cylinder (RH 5/8)

Billet Handlebar Control, Gma 5/8" Bore,Front Brake M/Cyl Chrome Finish, Gma-Hb-4-C
GMA
Chrome Finish Control
Front Brake Master Cylinder (RH 5/8)

Billet Handlebar Control, Gma 5/8" Bore,Front Brake M/Cyl Polished Finish, Gma-Hb-4-P
GMA
Polished Finish Control
Front Brake Master Cylinder (RH 5/8)

Billet Handlebar Control, Gma Lh Clutch Hydraulic M/Cyl Black Finish, Gma-Hc-4-B
GMA
Black Finish Control
Hydraulic Clutch Master Cylinder (LH)