All

Filter

Filter

Brand

54 products

54 products

Quick view
JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL
Jims
$51.95
Quick view
JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL
Jims
$76.95
Quick view
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)
Jims
$43.95
Quick view
JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL
Jims
$96.95
Quick view
JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL
Jims
$90.95
Sold Out
JIMS 49mm Fork Seal And Dust Shield Installer, Blue, made in the usa, Each, specific application, Harley 06-15 FX 12-15 FL 02 - 11 VR
Jims
$193.95
Sold Out
JIMS 5-And 6-Speed Contershaft Bearing Tool, 5-speed, 6-speed, Bearing, Countershaft, made in the usa, Each, Harley 82-15 FX 80-15 FL 87 - 94 XL
Jims
$340.95
Sold Out
JIMS 5-Speed Main Case Seal Installer Tool, made in the usa, specific application
Jims
$98.95
Quick view
JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL
Jims
$257.95
Quick view
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer
Jims
$37.95
Quick view
JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL
Jims
$120.95
Quick view
JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
Jims
$405.95
Quick view
JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
Jims
$341.95
Quick view
JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL
Jims
$303.95
Quick view
JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR
Jims
$460.95
Quick view
JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$251.95
Quick view
JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL
Jims
$293.95
Quick view
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL
Jims
$108.95
Quick view
JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$416.95
Sold Out
JIMS Crankcase Bearing Remover And Installer, Black, made in the usa, specific application, Harley 03-10 FX 03-10 FL
Jims
$275.95
Quick view
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$269.95
Sold Out
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover/Installer, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$383.95
Quick view
JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$233.95
Sold Out
JIMS Cruise Drive Vise Stand, made in the usa, Each, specific application
Jims
$122.95
Quick view
JIMS Cylinder Torque Plates, 3.75", 3.875", Harley 99-15 FX 99-15 FL
Jims
$776.95
Quick view
JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL
Jims
$42.95
Quick view
JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL
Jims
$102.95
Quick view
JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL
Jims
$90.95
Quick view
JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL
Jims
$67.95
Quick view
JIMS Exhaust Ring Retainer Tool, Black, Blue, made in the usa, Each
Jims
$125.95
Quick view
JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL
Jims
$77.95
Sold Out
JIMS Fuel Pump Retainer Remover Tool, made in the usa, specific application, Harley 08-15 FL
Jims
$220.95
Quick view
JIMS Hydraulic Balancer Retainer Tool, made in the usa, Pair, specific application, Harley 00-15 FX 00-15 FL
Jims
$48.95
Quick view
JIMS Ignition Switch Connector Remover Tool, Blue, made in the usa, specific application, Harley 03-15 FL 02 - 10 VR
Jims
$184.95
Quick view
JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR
Jims
$136.95
JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL

DS-38070077

$51.95

In Stock

Save $-51.95
/
Shipping calculated at checkout.
JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL
  • Remove and install oxygen sensors on fuel-injected models
  • Socket tool has 3/8" drive receiver or can be used with a 7/8" wrench
  • Socket tool will withstand up to 125 ft.-lbs. of torque
  • Made in the U.S.A.
JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL

DS-38010094

$76.95

In Stock

Save $-76.95
/
Shipping calculated at checkout.
JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL
  • Remove and install oxygen sensors on fuel-injected models
  • Socket tool has 3/8" drive receiver or can be used with a 7/8" wrench
  • Socket tool will withstand up to 125 ft.-lbs. of torque
  • Made in the U.S.A.
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042) Garage and Shop Jims - K and G Cycles
Jims

JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)

DS-38110039

$43.95

In Stock

Save $-43.95
/
Shipping calculated at checkout.
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)
  • Updates discontinued PART #DS-196295 (Jim's #1042) for use with 25mm wheel bearing found on 07-15 models
  • Made in the U.S.A.
JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL

DS-38010101

$96.95

In Stock

Save $-96.95
/
Shipping calculated at checkout.
JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL
  • Updates discontinued PART #DS-196295 (Jim's #1042) for use with 25mm wheel bearing found on 07-15 models
  • Made in the U.S.A.
JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL

DS-38050070

$90.95

In Stock

Save $-90.95
/
Shipping calculated at checkout.
JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL
  • Prevents axle from moving while you are torquing down the axle nut after setting belt tension
  • Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire
  • Made in the U.S.A.
JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL

DS-38010180

$257.95

In Stock

Save $-257.95
/
Shipping calculated at checkout.
JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL
  • Quality pilot lead-in reamer is made of high-speed steel
  • For 7mm valve guides H-D No. 16461-02 that are used in conjunction with the latest conical (Beehive) valve springs
  • Will also work on equivalent aftermarket 7mm valve guides
  • Made in the U.S.A.
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer Garage and Shop Jims - K and G Cycles
Jims

JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer

DS-38010171

$37.95

In Stock

Save $-37.95
/
Shipping calculated at checkout.
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer
  • Use for removing and installing valve guides
  • Adapters are supported by a stand that makes it easy to press valve guides in and out
  • A special guide alignment shaft holds the right angle for best possible guide installation
  • Save time and money on seat grinding by installing the guides in line with the valve seats
  • Kit includes base assembly, six adapters, three assembly pilots, three inserts and instructions
  • Adapters for working on 7mm valve guides available separately
  • Made in the U.S.A.
JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL

DS-38010097

$120.95

In Stock

Save $-120.95
/
Shipping calculated at checkout.
JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL
  • Used on 84-02 Big Twin to install the flywheel assembly to the left crankcase Timken bearing
  • Made in the U.S.A.
JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL

DS-38010131

$405.95

In Stock

Save $-405.95
/
Shipping calculated at checkout.
JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
  • Takes the guesswork out of setting up your balancer shaft sprocket and chain alignment
  • Made in the U.S.A.
JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL

DS-38010145

$341.95

In Stock

Save $-341.95
/
Shipping calculated at checkout.
JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
  • Installs inner balancer bearings mounted in left engine case
  • Can be used on a work bench without using an arbor press
  • Made in the U.S.A.
JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL

DS-38010085

$303.95

In Stock

Save $-303.95
/
Shipping calculated at checkout.
JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL
  • Removes both the front and rear counter-balancer shaft bearing assembly, from the left engine case
  • Made in the U.S.A.
JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR Garage and Shop Jims - K and G Cycles
Jims

JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR

DS-38010088

$460.95

In Stock

Save $-460.95
/
Shipping calculated at checkout.
JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR
  • Multi-faceted tool has many uses
  • Removes flywheel sprocket shaft inner bearing race on 03-07 Twin Cam
  • Can be used to remove Timken bearing (OEM #9028 or #9029) on 84-07 Big Twins, including JIMS 120" engines
  • Can be used to remove Timken bearing pinion shaft inner bearing race on 86-07 XL, including all Buells
  • Can also be used to remove press-fit transmission gears and bearings from input and output shafts on all 02-07 V-Rod models
  • Made in the U.S.A.
JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38010066

$251.95

In Stock

Save $-251.95
/
Shipping calculated at checkout.
JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Holds both cams in an upright position while lowering cam support plate over both guides and cam journal guides
  • Made from a non-marring material that will not damage any of the cams' surfaces
  • Made in the U.S.A.
JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL

DS-38010160

$293.95

In Stock

Save $-293.95
/
Shipping calculated at checkout.
JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL
  • Use to install the two inner cam bearings
  • Designed to press from the letter side of the inner cam bearing to eliminate any damage to the bearings, cam or case
  • Will set bearings .023"-.028" below case surface
  • Made in the U.S.A.
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL

DS-38010060

$108.95

In Stock

Save $-108.95
/
Shipping calculated at checkout.
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL
  • Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts
  • Made of non-marring Delrin
  • Comes with instructions
  • Made in the U.S.A.
JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38010062

$416.95

In Stock

Save $-416.95
/
Shipping calculated at checkout.
JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • "Breaks" the case sealant by pushing apart both case halves
  • Bolts to primary mounting holes
  • Uses included hand thread-in pushing screw
  • Flywheels will be pushed from the left case
  • Made in the U.S.A.
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38020042

$269.95

In Stock

Save $-269.95
/
Shipping calculated at checkout.
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Removes main drive gear from main bearing correctly while in transmission case
  • Eliminates need for arbor press and risk of case damage
  • Made in the U.S.A.
JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38010175

$233.95

In Stock

Save $-233.95
/
Shipping calculated at checkout.
JIMS Cruise Drive Main Case Seal Installer, Black, Blue, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Developed to specifically work with H-Ds 6-speed transmission bearings
  • Driver style seal installer installs main seal to correct depth without applying any stress to bearings or seals, and won't damage bearings, unlike a pushing or pull type of installer
  • Made in the U.S.A.
JIMS Cylinder Torque Plates, 3.75", 3.875", Harley 99-15 FX 99-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cylinder Torque Plates, 3.75", 3.875", Harley 99-15 FX 99-15 FL

DS-38010130

$776.95

In Stock

Save $-776.95
/
Shipping calculated at checkout.
JIMS Cylinder Torque Plates, 3.75", 3.875", Harley 99-15 FX 99-15 FL
  • Torque plates must be used when boring or honing late-model aluminum cylinders
  • Simulate running stress conditions
  • Come with instructions
  • Made in the U.S.A.
JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL

DS-38010195

$42.95

In Stock

Save $-42.95
/
Shipping calculated at checkout.
JIMS Dipstick Removal Tool, Black, made in the usa, Each, specific application, Harley 07-11 FX 07-11 FL
  • Allows riders and mechanics to quickly and safely remove engine oil level dipstick that lies precariously close to a scorching hot exhaust pipe
  • Also aids riders with limited hand strength in easily checking their oil level
  • Has square hole for 3/8" ratchet fitment, 7/8" hex for wrench fitment and cutout for clearance around exhaust pipe
  • Made in the U.S.A.
JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL

DS-38010193

$102.95

In Stock

Save $-102.95
/
Shipping calculated at checkout.
JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL
  • Allow you to fill hydraulic tappets before assembling valve train
  • Helps diagnose loose or spongy tappets that could eventually lead to bleed-down issues or sticky tappets that won't pump up due to poor hydraulic unit fitment
  • Made in the U.S.A.
JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL

DS-38010045

$90.95

In Stock

Save $-90.95
/
Shipping calculated at checkout.
JIMS Evolution Cylinder Stud Installation Tool, Black, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 86 - 15 XL
  • Assembly tool features a captive hardened ball bearing dimensionally set 1" from top of tool
  • Made of high tensile steel
  • Works on all Evolution Big Twin and XL models
  • Made in the U.S.A.
JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL

DS-38500121

$67.95

In Stock

Save $-67.95
/
Shipping calculated at checkout.
JIMS Exhaust Gasket Seal Installer Tool, Blue, made in the usa, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL
  • Installs fragile exhaust seal with ease and will position seal evenly to exhaust port of head
  • Can be used with exhaust flange nuts or JIMS handle PART #DS-196042; sold separately
  • Made in the U.S.A.
JIMS Exhaust Ring Retainer Tool, Black, Blue, made in the usa, Each Garage and Shop Jims - K and G Cycles
Jims

JIMS Exhaust Ring Retainer Tool, Black, Blue, made in the usa, Each

DS-38500227

$125.95

In Stock

Save $-125.95
/
Shipping calculated at checkout.
JIMS Exhaust Ring Retainer Tool, Black, Blue, made in the usa, Each
  • Quickly and easily installs the exhaust pipe retaining ring on almost all H-D exhaust systems
  • Install the H-D No.65325-83A ring in seconds, without scratching the exhaust pipe or twisting the ring
  • Made in the U.S.A.
JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL

DS-38050107

$77.95

In Stock

Save $-77.95
/
Shipping calculated at checkout.
JIMS Fork Stem Nut Wrench, Installation, Removal, made in the usa, specific application, Harley 95-13 FL
  • Machine steel construction
  • Loosens/tightens and torques to specs 11/2" stem nut without radio removal
  • Saves up to 45 minutes for an experienced mechanic
  • Made in the U.S.A.
JIMS Hydraulic Balancer Retainer Tool, made in the usa, Pair, specific application, Harley 00-15 FX 00-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Hydraulic Balancer Retainer Tool, made in the usa, Pair, specific application, Harley 00-15 FX 00-15 FL

DS-38010177

$48.95

In Stock

Save $-48.95
/
Shipping calculated at checkout.
JIMS Hydraulic Balancer Retainer Tool, made in the usa, Pair, specific application, Harley 00-15 FX 00-15 FL
  • Holds hydraulic tensioners in place that keep constant chain tension on counter balancer system
  • Made in the U.S.A.
JIMS Ignition Switch Connector Remover Tool, Blue, made in the usa, specific application, Harley 03-15 FL 02 - 10 VR Garage and Shop Jims - K and G Cycles
Jims

JIMS Ignition Switch Connector Remover Tool, Blue, made in the usa, specific application, Harley 03-15 FL 02 - 10 VR

DS-38070061

$184.95

In Stock

Save $-184.95
/
Shipping calculated at checkout.
JIMS Ignition Switch Connector Remover Tool, Blue, made in the usa, specific application, Harley 03-15 FL 02 - 10 VR
  • Safely removes ignition switch wiring connector
  • Made in the U.S.A.
JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR Garage and Shop Jims - K and G Cycles
Jims

JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR

DS-38070050

$136.95

In Stock

Save $-136.95
/
Shipping calculated at checkout.
JIMS Ignition Switch Housing Alignment Tool, Harley 03-15 FL 02 - 10 VR
  • Align ignition switch housing as retaining screws are being torqued
  • Also used to position switch in the correct orientation for properly activating the fork lock
  • Proper alignment of the switch will extend the life of the ignition switch housing
  • Made in the U.S.A.