All

• Designed to fit in the place of your flatside at Bob tanks, these 4.2 gallon 2 stretched gas tanks eliminate the dash and the gap between the tank and the seat
• Include heavy duty mounts with rubber inserts and chrome plated hardware

• Scalloped sides provide a unique old school look
• Mounting brackets can be cut and welded to the frame for exact tank placement
• Tunnel measures 2 ¹/₄ wide, 15 long and is 4 deep at the front
• Holds 2.3 gallons
• Use with ³/₈ NPT uel Valve

• Scalloped sides provide a unique old school look
• Mounting brackets can be cut and welded to the frame for exact tank placement
• Tunnel measures 2 ¹/₄ wide, 15 long and is 4 deep at the front
• Holds 2.3 gallons
• Use with ³/₈ NPT uel Valve

Bobbed gas tank set comes without reserve shut off rod and shift gate. Accepts 3/8" National Pipe Thread petcock.
Gas tank set accepts two vented caps. This tank may require fuel rod alignment before installation. Check the tank for flaws and fit be

Bobbed gas tank set comes with reserve and hand shift, shift mounts. Tank features provisions to accept early caps, reserve shut off rod, and two or three light dashes. The lower bracket is "C" shaped.
The gas tank set accepts two vented caps. Tank may require fuel rod alignment before installation of shut off assembly.

• Check the tank for flaws and fit before painting.
• Do not grind or sand the seam or joints.
• Clean the inside of the tank.
• It is suggested to pressure test and use a tank sealer.

We suggest using Kreem gas tank combo kit to clean, condition and seal in order to help stop leaks and prevent corrosion. Check shut off opening, making sure the shut off valve can be easily installed. The shut off opening should be masked or plugged during painting for easy installation of shut off valve. All tanks or tank sets will require hand fitting to give correct alignment for dash and fuel line fitment. Dash will also have to be shimmed when installed, to achieve correct height.

Bobbed gas tank set features provisions to accept early caps , reserve shut off rod, and two or three light dash.
Tank may require fuel rod alignment before installation of shut off assembly. Check the tank for flaws and fit before painting. Do not

Gas tank has a left side petcock opening, and a fuel capacity of 2.4 gallons. It features a four bolt mount strap system to be welded onto frame, and a screw type bung.
Order cap separately. The tank requires sanding and primer. Check the tank for f

Gas tank is a flatside style tank, and accepts stock style gas caps. Tank has a fuel capacity of 5.2 gallons, and has a left side petcock opening.
The "Stretched" rear section of the tank does not hold gas, and features seamless stretched portion.

Gas tank has a raw finish with a left side petcock location and a fuel capacity of 3.2 gallons.
Tank is dual cap type. This tank is shorter in length than the stock tank. Tank accepts stock components and is for carburetor models. Use with 1975-up p

Replacement gas tank has a right side bung, and a left side fuel gauge opening. The tank is for EFI models, and has a fuel capacity of 5.1 gallons.
Tank is raw, check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. The fuel line fitting should be masked or plugged for easy installation of the fuel line. Clean the inside of the tank. It is suggested to pressure test, and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks, and prevent corrosion. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Bobbed gas tank has a right side bung, and a left side fuel gauge opening. The tank is for EFI models, and has a fuel capacity of 5.1 gallons. Check the tank for flaws and fit before painting. Do not grind or sand the seams or j

Fits:

FXDWG 2010-2017 EFI models
FXDB 2010-2017

Gas tank is one piece with a left side petcock location, and has a fuel capacity of 4.0 gallons. Tank has dash cut out, and includes a chrome dash panel. Bolts on with no additional hardware. Requires purchase of complete dash kit.
Check the tank fo

Gas tank has a left side petcock opening, and has a fuel capacity of 4.0 gallons. Tank kit includes chrome gas caps, and a chrome cast dash with an adapter ring.
Ring allows the reuse of the existing electronic speedometer. For use on carbureted mod

Gas tank has a left side petcock fitting, and has a fuel capacity of 4.0 gallons. Tank includes chrome bung style late caps, and all necessary mounting hardware for installation.
Tank kit features a three light dash kit which includes a plain dash b

Saga "Dish gas tank" has a right side petcock opening, and features dished sides. Fuel capacity is 3.0 gallons.
It uses a pop-up style gas cap which is not included. Check the tank for flaws and fit before painting. It requires sanding and primer. Do not grind or sand the seams or joints. Check the petcock opening, making sure the petcock can be easily installed. The petcock fitting should be masked or plugged during painting for easy installation of the petcock. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks, and prevent corrosion.