All

S&S CYCLE Flange-Mount Intake Manifold, Harley 99-06 FX 99-06 FL

• For mounting an S&S E and G series carburetor or flange mount carburetor on a 99-06 Twin Cam motor with S&S or stock cylinder heads
• Will also fit a 84-99 80" Evolution that requires a manifold with a map sensor port
• Come with a map sensor port and match OEM intake ports
• Made in the U.S.A.

S&S CYCLE Flange-Mount Intake Manifold, Natural, Harley 84-00 FX 84-99 FL 87 - 94 XL

• Can be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-99
• Use with stock or S&S cylinder heads
• For use with stock 5.5550" length cylinders
• Requires the use of S&S intake seals and flanges (sold separately)
• Made in the U.S.A.

S&S CYCLE Flange-Mount Intake Manifold, No MAP Sensor Port., Harley 84-00 FX 84-99 FL 87 - 94 XL

• Can be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-99
• Use with stock or S&S cylinder heads
• For use with stock 5.5550" length cylinders
• Requires the use of S&S intake seals and flanges (sold separately)
• Made in the U.S.A.

S&S CYCLE Manifold Conversion Kit, Natural, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 87 - 94 XL

• Kit converts stock 80" Evolution manifold to a more rigid-mount system
• Eliminates cracking and leaking problems associated with the stock rubber compliance fittings
• Includes an S&S Performance manifold, mounting flanges, two specially molded O-rings and two .350" spacers for spacing out the stock air cleaner or carb mount bracket
• Fits 84-99 80" models if flange-type carburetor or adapter is used
• Replacement flange seals also available
• Made in the U.S.A.

S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 4.9365", engine size 88"-95"

• Used to install a stock CV carburetor on S&S 3.625", 4" and 4.125" bore motors
• Will also fit S&S Hot Setup and Super Stock head kits
• PART #1050-0295 is used to install 48 mm CV or Mikuni carburetor on Twin Cam 88", 95" bore motors
• Made in the U.S.A.

S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 5.550"

• Used to install a stock CV carburetor on S&S 3.625", 4" and 4.125" bore motors
• Will also fit S&S Hot Setup and Super Stock head kits
• PART #1050-0295 is used to install 48 mm CV or Mikuni carburetor on Twin Cam 88", 95" bore motors
• Made in the U.S.A.

Sifton Intake Manifold, XL, 1986-Up

Intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system. Manifold will accept S&S CV or other aftermarket carburetor.
Order flange kit separately.
Fits:
XL 1986-UP
UOM: 1 - EA
Country of Origin: Imported

V-Twin Manufacturing Manifold S&S Manifold for Evolution XL - Sold Each

S&S intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system.
The outer diameter of this manifold measures 1.88". Order flange kit separately.

XL 1986-UP

Tech Note:

Suggested to

V-Twin Manufacturing OE 90-99 BT-Ev-Intake Manifold - Sold Each

Intake manifolds are of cast alloy spigot type.

OEM: 27019-89A

FXST 1990-1999
FLST 1990-1999
FLT 1990-1999
FXR 1990-1994
FXD 1991-1999

V-Twin Manufacturing Stock Intake Manifolds, Origal type, 1999-up TC-88 - Sold Each

Intake manifold are of cast alloy and spigot type.

OEM: 27613-99

FXST 1999-UP
FLST 1999-UP
FXD 1999-UP
FLT 1999-UP

V-Twin Manufacturing Thunder Jet EFI Manifold w 4.975-4.980'' Long Cylinders, 117'' Kit - Sold Each

ThunderJet EFI Intake Manifold for 4.975-4.980" long cylinders.
For use with 117" kit or 120" Axtell engine with S&S flywheels

Custom application