All

ARLEN NESS Chrome Custom Turn Signal Mounts, Natural, Harley 87-05 FX 87 - 16 XL

• Relocates turn signals off handlebars; brings them in close to triple trees
• Direct bolt-on to triple tree pinch bolts; mount on upper or lower tree
• Made of billet aluminum
• Sold in pairs

CHRIS PRODUCTS Black Nickel Rear Turn Signal Brackets, Each, Harley 00-13 FX

• Chrome or black nickel finish
• Direct OEM replacements
• Must purchase screw attachment PART #0104 (OEM #56104-94) to attach rear turn signal bracket PART #DS-280267
• Sold each

DRAG SPECIALTIES Black Short Turn Signal Fork Mounts, Gloss, Harley 87-07 FX 87 - 07 XL

• Move turn signal closer to the bike for a cleaner look
• Available in chrome or gloss black
• Spacers are included for installation on 49mm forks
• Sold in pairs

DRAG SPECIALTIES Black Turn Signal Swivel Kit, Harley 88-16 FX 86-16 FL 88 - 16 XL

• Available in chrome or black
• Swivels are CNC-machined steel
• Replaces stock zinc swivel
• Sold as a set for both sides

DRAG SPECIALTIES Chrome Fine-Thread Turn Signal Mounting Studs, size 5/16"-24

• Chrome-plated hollow steel studs
• Mount to turn signals with internal threads
• Perfect for custom mounting, wires run internally through the studs
• Overall length is 3.886", spacer length is 1.560"
• Sold in pairs

DRAG SPECIALTIES Chrome Short Turn Signal Fork Mounts, Harley 87-07 FX 87 - 07 XL

• Move turn signal closer to the bike for a cleaner look
• Available in chrome or gloss black
• Spacers are included for installation on 49mm forks
• Sold in pairs

DRAG SPECIALTIES Chrome Turn Signal Swivel Kit, Harley 88-16 FX 86-16 FL 88 - 16 XL

• Available in chrome or black
• Swivels are CNC-machined steel
• Replaces stock zinc swivel
• Sold as a set for both sides

DRAG SPECIALTIES Gloss Black Turn Signal Standoff, Harley 63-15 FL

• Available with a chrome or gloss black finish
• Designed for easy wire routing
• Sold each

Front Bullet Ts Mounts,Chrome Touring Models 1996/2013 Will Not Fit Road King

• Give your Touring model the custom stripped-down look of the Street Glide^®
• These mounts replace the factory passing lamps and flat lens turn signal mounts and give the option of the sleek bullet turn signals found in the electric section

V-FACTOR
Chrome Mount Set
Fits Touring Models 1996/2013 (except Road King)
(Imported)

Front Turn Signal Mnt Kit Bt 1988/Later* & Spt 1988/2003 Chrome Plated Rpls.68185-00

• Direct replacement for the dull zinc plated original equipment kit
• Mounts to controls using the mirror stem (⁵/₁₆-24 thread)
• Can be used with custom turn signals that have a ⁵/₁₆-24 female thread
• Lower studs swizel for signal alignment

V-FACTOR
Chrome Plated Mount Kit
Fits Big Twin 1988/Later & Sportster 1988/2003 with handlebar mounted turn signals
Replaces HD# 68185-00
(Imported)

Marker Light Mount To Mirror Big Twin And Sportster 1973/L* Use W/Custom Dual Marker Light

• 12 volt die cast custom oval marker lights with louvered side lights
• Measure 2 ³/₄ long x 1 wide x 1 ¹/₈ high
• Pre-drilled with either a ⁵/₁₆ or ³/₈ counterbored mounting hole
• Great for rear fender struts, front fork brackets, beneath your mirrors or front fender supports
• See below for availability of lens color and bulb type
• Complete with mounting hardware

V-FACTOR
Optional Mount & Replacement Part
Chrome Plated Mirror Stem Mounts
Kit mounts marker lights to threaded portion of mirror stems under controls
Sold in pairs, (Imported)

Mount Kit Ts & Passing Light Bt 68/82 Chrome Plated Rpls Hd 68519-68 & 68795-68
This Turn Signal and Passing Light Mount is a quality reproduction of original equipment manufacturer's parts. Use with OE spotlight support bar or any 3/4 O.D. tube to mount turn signals or additional lighting to the front or rear of L models 1968/Later and custom use. Includes the cast turn signal mount used on Big Twin 1969/Later (Replaces HD# 68519-68) and the support bar clamp used on Big Twin 1968/1982 (Replaces HD# 68795-68)V-FACTOR
Chrome Plated Complete Kit
Replaces HD# 68518-68

Rear Turn Signal Mounts Fxstd 00/Later & Customs Chrome, Pair, Hd# 68821-00

• Die cast mount is an exact duplicate of the OEM part
• Sold in pairs

V-FACTOR
Optional Mount & Replacement Part
Rear Deuce style mounts
Turn Signal Mount Pair
Fits 2000/Later Deuce and 2002/Later Non-Touring models
Replaces HD# 68821-00
(Imported)

RSD Black Rear Strut Mounts For Turn Signals, Gloss, Harley 06-16 FX 04 - 16 XL

• CNC machined billet aluminum
• Mount RSD Tracker turn signals
• Available in gloss black and chrome
• Hardware included
• Sold in pairs
• Made in the U.S.A.

RSD Chrome Rear Strut Mounts For Turn Signals, Harley 06-16 FX 04 - 16 XL

• CNC machined billet aluminum
• Mount RSD Tracker turn signals
• Available in gloss black and chrome
• Hardware included
• Sold in pairs
• Made in the U.S.A.

Turn Signal Mount,Rear 9" Long Fl 4Spd 74/84 Flst/C 86/06 Flt 91/06,Cp Stl,Rpls Hd 68510-74C

• Available in the standard 13 length as an OE style replacement when using saddlebags or the shorter 9 or 8 1/4 version that works great when the saddlebags have been removed
• See below for availability of construction (OE style die-cast aluminum or high mileage vibration resistant steel)

V-FACTOR
9 Chrome Plated Steel
5 7/8 ender Mount Width
Fits L 4 speed 1974/1984, LST/C 1986/2006 & FLT 1991/2006
Replaces HD# 68510-74C

Turn Signal Mount,Rr 8-1/4" Lg Fl 4Spd 74/84 Flst/C 86/06 Flt 91/06,Cp Stl,Rpls Hd 68510-74C

• Available in the standard 13 length as an OE style replacement when using saddlebags or the shorter 9 or 8 1/4 version that works great when the saddlebags have been removed
• See below for availability of construction (OE style die-cast aluminum or high mileage vibration resistant steel)

V-FACTOR
8 1/4 Chrome Plated Aluminum
5 7/8 ender Mount Width
Fits L 4 speed 1974/1984, LST/C 1986/2006 & FLT 1991/2006
Replaces HD# 68510-74C

Turn Signal Relocation Kit, Cp Fits 39Mm Fork Tubes Clamp W/ Hardware Chrome Plated

• 12 volt die cast custom oval marker lights with louvered side lights
• Measure 2 ³/₄ long x 1 wide x 1 ¹/₈ high
• Pre-drilled with either a ⁵/₁₆ or ³/₈ counterbored mounting hole
• Great for rear fender struts, front fork brackets, beneath your mirrors or front fender supports
• See below for availability of lens color and bulb type
• Complete with mounting hardware

V-FACTOR
Optional Mount & Replacement Part
Chrome Plated ork Tube Clamps/ront Mounts
Fits 39mm fork tubes
(Imported)

Turn Signal Relocation Kit, Cp Fits 41Mm Fork Tubes Clamp W/ Hardware Chrome Plated

• 12 volt die cast custom oval marker lights with louvered side lights
• Measure 2 ³/₄ long x 1 wide x 1 ¹/₈ high
• Pre-drilled with either a ⁵/₁₆ or ³/₈ counterbored mounting hole
• Great for rear fender struts, front fork brackets, beneath your mirrors or front fender supports
• See below for availability of lens color and bulb type
• Complete with mounting hardware

V-FACTOR
Optional Mount & Replacement Part
Chrome Plated ork Tube Clamps/ront Mounts
Fits 41mm fork tubes
(Imported)

V-Factor Rear Turn Signal Mount for Big Twin

• Available in the standard 13 length as an OE style replacement when using saddlebags or the shorter 9 or 8 1/4 version that works great when the saddlebags have been removed
• See below for availability of construction (OE style die-cast aluminum or high mileage vibration resistant steel)

V-FACTOR
13 Chrome Plated Steel
3 3/4 ender Mount Width
Fits FLT, FLHT & FLHS 1985/1990, FXRT & FXRD 1983/1992
Replaces HD# 68643-83B

V-Twin Manufacturing 10" Chrome Rear Turn Signal Mounts, 1974-84 FLH 1986-up FLST 1991-up - Sold Each

Chrome 10" rear mount bar

OEM: 68611-98

FL 1974-1984
FLT 1991-UP
FLHR 1991-UP
FLST 1986-UP

V-Twin Manufacturing 12 7-8" Chrome Rear Turn Signal Mounts, 1974-84 FLH 1986-up FLST 1991-up - Sold Each

Chrome 12-7/8" rear mount bar.

OEM: 68510-74B

FL 1974-1984

V-Twin Manufacturing 2 Piece Chrome Short Turn Signal Kit - Kit

Shortie signal mount set chrome with hardware.

FLST 1986-UP
FLT 1986-UP

V-Twin Manufacturing 3-1/2" Rear Turn Signal Stud Set - Sold Each

Rear 3-1/2" long threaded studs are hollow for wiring.
Sold in a quantity of 2.
OEM: 63493-87

FXR 1987-1994

V-Twin Manufacturing 35mm Chrome Turn Signal Clamp Kit - Set

Mount your custom or stock turn signals to your 35mm fork tubes with this smooth chrome clamp set.
Sold in a quantity of 2.

Custom application

V-Twin Manufacturing 39mm Chrome Turn Signal Clamp Kit - Set

Smooth clamp set chrome will mount custom or stock turn signals to fork tubes on 39mm front ends. Includes hardware.
Turn signals are unthreaded and are sold with 2 bolts, 2 spacers, and 2 nuts. Clamp set is equipped with an 8.5mm hole for accepting

V-Twin Manufacturing 39mm Grooved Billet Fork Clamps - Set

Chrome grooved clamps will mount custom or stock turn signal lamps to 39mm forks.
Sold in a quantity of 2.

Custom application

V-Twin Manufacturing 4" Short Chrome Rear Directional Signal Mount Bar, 1974-84 FLH 1986-up - Sold Each

8-3/4" bracket chrome is constructed of formed and welded steel which offers the greatest strength against vibration.

FL 1974-1984
FLST 1986-UP
FLHR 1991-UP

V-Twin Manufacturing 41mm Chrome Turn Signal Clamp Kit - PR

Smooth chrome clamp set mounts custom or stock turn signals to custom or stock fork tubes on 41mm front ends. Includes 2 bolts, 2 nuts, and 2 spacers.
Turn signals are unthreaded and are sold with 2 bolts, 2 spacers, and 2 nuts. Clamp set is equippe

V-Twin Manufacturing 41mm Grooved Billet Fork Clamps - Set

Chrome grooved clamps will mount custom or stock turn signal lamps to 41mm forks.
Clamp set features a hole drilled at edge of clamp for turn signal wires. Sold in a quantity of 2.

Custom application

V-Twin Manufacturing 8 1-4" Chrome Rear Turn Signal Mounts, 1974-84 FLH 1986-up FLST 1991-up - Sold Each

Chrome 8-1/4" rear mount bar is cast construction.

FL 1974-1984
FLST 1986-2006
FLHR 1991-2007