All

Bushing,Piston Pin +.002 K Spt 45Ci All Yrs* Replaces Hd 24331-78

• Connecting rod assemblies include rods, crank pin, crank pin nuts, piston pin bushings and rod rollers with aluminum retainers
• Everything fitted with standard size rollers ready to install

V-FACTOR
Replacement piston ring bushing
.002 OS O.D.
Fits K Model, Sportster, & 45ci all years
Replaces HD# 24331-78

Bushing,Piston Pin Std Od .895 K Spt 45Ci All Yrs* Replaces Hd 24331-36

• Connecting rod assemblies include rods, crank pin, crank pin nuts, piston pin bushings and rod rollers with aluminum retainers
• Everything fitted with standard size rollers ready to install

Rowe
Replacement Piston Pin Bushing
Standard O.D. .895
Fits K Model, Sportster, & 45ci, all years (sold in pairs)
Replaces HD# 24331-36

Bushing,Piston Pin Std Od Big Twin All Years,(Ex Tc) Pm 20-20570
These Connecting Rod Assemblies include rods, single hole crank pin, crank pin nuts, piston bushings & rod rollers with aluminum retainers. Everything is fitted with standard size rollers ready to install. All rod sets measure 7.438 eye to eye.Kibblewhite
Piston pin bushings
Standard O.D. .895
Sold in pairs
Replaces HD# 24334-36

Bushing,Piston Pin Std Od Fits Twin Cam 1999-2014 Pm 20-20780, Hd24316-99
These Connecting Rod Assemblies include rods, single hole crank pin, crank pin nuts, piston bushings & rod rollers with aluminum retainers. Everything is fitted with standard size rollers ready to install. All rod sets measure 7.438 eye to eye.Kibblewhite
Piston pin bushings
Standard O.D. Fits Twin Cam models 1999/2014
Replaces HD# 24316-99
Sold in pairs

KB PERFORMANCE Replacement Piston Pin Clips For Hypereutectic Pistons, 4-Pack, specific application, Harley 71-99 FX 66-99 FL 71 - 15 XL

• Manufactured from high-strength, T-5, heat-treated, 390 hypereutectic aluminum alloy
• Allow a tighter fit and longer piston and ring life
• Diamond-machined pistons are held to plus or minus one gram weight and less than one-half-thousandth-inch (.0005") tolerances from piston to piston
• Each kit contains two pistons, pins, spiral-lock pin clips and Hastings moly rings
• Replacement piston rings and pin lock rings available separately

KIBBLEWHITE Wrist Pin Bushing, SAE660 Bearing Bronze, Harley 71-00 FX 41-99 FL 87 - 94 XL

• Constructed of SAE660 bearing bronze
• Made to exact tolerances and will meet or exceed fitment and wearability of all other OE style replacement bushings available
• Sold each
• Made in the U.S.A.

KIBBLEWHITE Wrist Pin Bushing, SAE660 Bearing Bronze, Harley 71-00 FX 41-99 FL 87 - 94 XL

• Constructed of SAE660 bearing bronze
• Made to exact tolerances and will meet or exceed fitment and wearability of all other OE style replacement bushings available
• Sold each
• Made in the U.S.A.

KIBBLEWHITE Wrist Pin Bushings, Harley 05-16 FX 05-16 FL

• Constructed of SAE660 bearing bronze
• Made to exact tolerances and will meet or exceed fitment and wearability of all other OE style replacement bushings available
• Sold each
• Made in the U.S.A.

Piston Lock Ring,Wire Type Uw All Wiseco 88Ci & 95Ci Twin Cam Pistons Mfg #W5752

• WISECO
• Pistons are forged from hi-silicon aluminum alloy for superior strength and dependability
• The unique piston shape allows tight piston to wall clearances for quieter operation
• Grooves are machined around the top ring lands to reduce detonation and improve the sealing power of the top ring
• Designed for Stock stroke flywheels only
• All wrist pin holes are ream fit for a perfect geometrical surface
• Enlarged valve pockets provide the clearance for larger valves and high lift cams but must be checked
• Includes instructions and clearance recommendations

HASTINGS Replacement Lock Ring Pair
Fits Piston Kits 62230, 62231, 62232, 62233, 62234, 62235, 62236, 62237 & 62238Note:

Hastings replacement rings are for one piston only unless otherwise noted by a (*)
* Includes rings for 2 pistons

Piston Part,Kb Piston Ret Ring Keith Black,Twin Cam 88 Pistons Only Kb#Prj100-3

• Spawned from this successful manufacturer's line of automotive pistons
• Lightweight permanent mold cast pistons
• Manufactured from Hypereutectic 390 Alloy, contain 16-18% silicon, and heat treated to T6 specifications producing a stronger than stock piston
• Special alloy compositon keeps heat confined to the combustion chamber and reduces heat transfer to the piston Fitself producing a cooler running piston
• Can be fitted with a clearance as small as .00075
• Piston expansion is reduced by as much as 20% over conventional pistons
• Less piston rock, better ring support, more durability and better retained compression for maximum power
• The key feature to these pistons is the accumulator groove between the top and second ring which averages the normal pressure between the first and second ring, keeping the pressure low enough to prevent lifting of the top ring while maintaining preload on the second (oil scraping) ring
• Each set of pistons includes wrist pins, spiral locks, engine assembly lube, and Hastings Moly rings
• Wrist pins measure .792 O.D. on single cam models and .927 on Twin cam models
• Sold in sets as shown
• Replacement ring sets availableKB Performance Pisons
  Replacement parts
  Piston pin carclip for KB Twin Cam pistons only

Piston Part,Lock Ring Big Twin L77/E83,Spt L77/E85 Replaces Hd 22588-78
These are the finest products available on the market today including original equipment.HARDWARE Piston Pin Lock Ring Truarc Style Late 1997/Early 1983. Fits Ironhead Sportster late 1977/Early 1985. Sold in packages of 10

Piston Part,Lock Ring Bt 73/E77,Spt 52/E77,45Ci 56/L Replaces Hd 22582-52
These are the finest products available on the market today including original equipment.HARDWARE Piston Pin Lock Ring Spiral Style 1973/Early 1977. Fits K model & Sportster 1952/Early 1977, 45ci 1956/Later. Sold in packages of 10

Piston Pin Bushing, Std Od Big Twin All Years(Ex Tc88)* Replaces Hd 24334-36
These Connecting Rod Assemblies include rods, single hole crank pin, crank pin nuts, piston bushings & rod rollers with aluminum retainers. Everything is fitted with standard size rollers ready to install. All rod sets measure 7.438 eye to eye.Replacement part. Piston pin Bushing, all years (except Twin Cam 88). Standard O.D. .895. Sold in pairs.

Piston Pin Bushing,+.002" Od Big Twin All Years(Ex Tc88)* Replaces Hd 24334-78
These Connecting Rod Assemblies include rods, single hole crank pin, crank pin nuts, piston bushings & rod rollers with aluminum retainers. Everything is fitted with standard size rollers ready to install. All rod sets measure 7.438 eye to eye.Replacement part. Piston pin bushing, all years (except Twin Cam 88). .002 O.S. O.D. Sold in pairs.

Piston Pin Lock Ring Sh Bt Evo L83/99 Spt L85/L* Replaces Hd 22589-83
These are the finest products available on the market today including original equipment.HARDWARE Piston Pin Lock Ring Round Wire Style Shovelhead & Evolution Late 1983/1999

V-Twin Manufacturing BT Wrist Pin Bushings, Standard Sifton, 36-99 - Sold Each

Ampco 45 standard bushing for wrist pin. Bushing is machined from a bronze alloy. This bushing is a must for a rebuild and high performance application.

EL 1936-1940
UL 1937-1948
FL 1941-1984
FX 1971-1984
FLT 1979-1998
FXR 198

V-Twin Manufacturing Wrist Pin & Lock Kit, 85-99 Evo - Kit

Wrist pin and lock kit

OEM: 22764-83

FXST 1984-1998
FLST 1986-1998
FLT 1984-1998
FXD 1991-1998
FXR 1984-1994

Tech Note:

Do not install wrist pins without lubricating them first with assembly lube. Refer to applica

V-Twin Manufacturing Wrist Pin & Lock Kit, 86-03 883 XL XL - Kit

Wrist pin and lock kit for XL

OEM: 22719-85

XL 1986-UP 883

Measurements:

Overall Length: 2-3/8"

Tech Note:

Do not install wrist pins without lubricating them first with assembly lube. Refer to applicable service

V-Twin Manufacturing Wrist Pin & Lock Kit, 88-03 1200 XL XL - Kit

Wrist pin and lock kit for 1200 XL

OEM: 22765-88

XL 1988-UP 1200

Measurements:

Overall Length: 2-7/8"

Tech Note:

Do not install wrist pins without lubricating them first with assembly lube. Refer to applicable s

V-Twin Manufacturing Wrist Pin Bushing .002 - Set

.002 bushings for Piston pin.
Sold as a pair.

EL 1936-1940
FX 1971-1984
FLT 1979-1998
FXD 1991-1998
FL 1941-1984
FXST 1984-1998
FXR 1982-1994
FLST 1986-1998

Measurements:

Outer Diameter: 0.0899"
Inner Diamete

V-Twin Manufacturing Wrist Pin Bushing .005 - Set

.005 oversize bushings for piston pin.
Sold as a pair.

EL 1936-1940
FX 1971-1984
FLT 1979-1998
FXD 1991-1998
FL 1941-1984
FXST 1984-1998
FXR 1982-1994
FLST 1986-1998

Measurements:

Outer Diameter: 0.0899"
Inne

V-Twin Manufacturing Wrist Pin Bushing .010 - Set

.010 bushings for piston pin.
Sold as a pair.
OEM: 24335-36

EL 1936-1940
FX 1971-1984
FLT 1979-1998
FXD 1991-1998
FL 1941-1984
FXST 1984-1998
FXR 1982-1994
FLST 1986-1998

V-Twin Manufacturing Wrist Pin Bushing STD - Set

Standard bushings for piston pin.
Sold as a pair.
OEM: 24334-36

EL 1936-1940
FX 1971-1984
FLT 1979-1998
FXD 1991-1998
FL 1941-1984
FXST 1984-1998
FXR 1982-1994
FLST 1986-1998

V-Twin Manufacturing Wrist Pin Lock, 10 pk, 2000-Up - Pack

Wrist pin lock for 2000-up TC-88 pistons

OEM: 22097-99

FXST 1999-UP
FXD 1999-UP
FLST 1999-UP
FLT 1999-UP

Tech Note:

Do not install wrist pins without lubricating them first with assembly lube. Refer to applicable ser

V-Twin Manufacturing Wrist Pin Lock, 10 pks. 1983-99 XL - Pack

Wrist pin lock, 10 pack.

OEM: 22589-83

FXST 1984-1998
XL 1986-UP
FLT 1984-1998
FXD 1991-1998
FLST 1986-1998
FXR 1984-1994

Tech Note:

Do not install wrist pins without lubricating them first with assembly lube.

Wire Type Piston Pin Lock Ring Ph,Sh,Bt Evo,Spt Evo For Wiseco Brand Pistons W5731

• WISECO
• Pistons are forged from hi-silicon aluminum alloy for superior strength and dependability
• The unique piston shape allows tight piston to wall clearances for quieter operation
• Grooves are machined around the top ring lands to reduce detonation and improve the sealing power of the top ring
• Designed for Stock stroke flywheels only
• All wrist pin holes are ream fit for a perfect geometrical surface
• Enlarged valve pockets provide the clearance for larger valves and high lift cams but must be checked
• Includes instructions and clearance recommendations

HASTINGS Replacement Lock Ring Pair
Fits Piston Kits 62131 to 62137, 62139 to 62148, 62164 to 62167, 62248, 62259 to 62262, 62468 to 62471Note:

Hastings replacement rings are for one piston only unless otherwise noted by a (*)
* Includes rings for 2 pistons

WISECO PISTON Replacement Circlip, Harley 71-99 FX 48-99 FL 86 - 16 XL

• Wiseco's high-tech manufacturing ensures greater operating strength and lower expansion at high temperatures
• Kits include forged pistons with ArmorGlide coated skirts, rings, retainer clips, chrome piston pins and top-end gasket kits
• Twin Cam pistons have ArmorPlating which improves ring seal, eliminates ring micro-welding, and improves the piston's ability to defend against detonation damage
• Piston kits are available with X-Ring package (.062 top ring, .062 compression ring and .158 oil ring), XC-Ring packages (.039 top ring, .062 compression ring, .158 oil ring) or VM-rings (1.2mm steel, positive twist, gas nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails); VM-rings, X-Rings and XC-Rings will not interchange
• X- and XC-rings are identified by PART # in the application chart; X-Ring PART #s end with an "X" and XC-Ring PART #s end with an "XC"
• 103" kits require cylinder boring; 110" kit requires big-bore cylinders and case boring; X-Ring package (.0472" top ring, .0472" compression ring and .118" oil ring); recalibration required
• Pistons are made in the U.S.A.

WISECO PISTON Replacement Circlips, Harley 99-16 FX 99-16 FL

• Wiseco's high-tech manufacturing ensures greater operating strength and lower expansion at high temperatures
• Kits include forged pistons with ArmorGlide coated skirts, rings, retainer clips, chrome piston pins and top-end gasket kits
• Twin Cam pistons have ArmorPlating which improves ring seal, eliminates ring micro-welding, and improves the piston's ability to defend against detonation damage
• Piston kits are available with X-Ring package (.062 top ring, .062 compression ring and .158 oil ring), XC-Ring packages (.039 top ring, .062 compression ring, .158 oil ring) or VM-rings (1.2mm steel, positive twist, gas nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails); VM-rings, X-Rings and XC-Rings will not interchange
• X- and XC-rings are identified by PART # in the application chart; X-Ring PART #s end with an "X" and XC-Ring PART #s end with an "XC"
• 103" kits require cylinder boring; 110" kit requires big-bore cylinders and case boring; X-Ring package (.0472" top ring, .0472" compression ring and .118" oil ring); recalibration required
• Pistons are made in the U.S.A.