All

Flat Rear Fender 7" Wide For Wide Tire Rigid Frame & Custom Use

• Designed with strength in mind, these one-piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Raw Steel 7" wide flat fender
Fits Big Twin & Sportster Rigid frames

Flat Rear Fender 8-1/2" Wide For Wide Tire Rigid Frame & Custom Use.......8-1/2" Wide

• Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Kraft Tech
Raw Steel 8 ¹/₂ wide flat fender
Fits Big Twin & Sportster Rigid frames

Fender,Rear Custom Fatbob Custom Use For Left Hand Drive 7" Wide,Raw Steel,38"Long

• This 7 wide rear fender measures 38 in total length and is stamped from 19 guage steel
• The smooth (non-drilled) sides allow you to position the fender exactly where you want it

V-FACTOR
Raw Steel with left hand drive fitment
Fits Rigid or Swingarm frame
(Imported)

Flat Rear Fender 6"Wide Universal Custom Use...6" Wide Rolled 14 Gauge Steel

• Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel
• They measure a full 48 in circumference and can be cut to your desired length
• enders are not drilled or relieved for the chain or drive belt
• See the frame and body section for fender supports

Kraft Tech
Raw Steel 6 wide flat fender
Fits Big Twin & Sportster Rigid frames

V-Twin Manufacturing 10" Wide Rear Fender With Round Profile - Sold Each

Round profile chopper raw fender is 10" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.

Custom application

V-Twin Manufacturing 11" wide Rear Motorcycle Fender Smooth Pro Stretch - Sold Each

Smooth rear Pro stretched fender is constructed of 2mm thick steel and has a raw finish. Fender measures 11" wide.
We suggest pre fitting the fender prior to painting.

Custom application

Strutless rear fender is 2mm thick and has a width of 12.75" and constructed of steel. Fender will cover 280-300 series tire.
Let V-TWIN help you with that wide tire conversion. These strutless rear fenders will fit over the new tire and attach to the stock width frame. Fender will bolt to frames 11" wide where strut mounts. The width of the inside of the fender where it ataches to the frame measures 12-1/4". The stock strut supports must be removed from the frame. We suggest pre fitting the fender prior to painting. Position cut drill mount holes as required.

Strut Outer Width: 13-3/4"

Fender Inner Width: 12-1/2"

Fender Outer Width: 13-1/8"

Strut Inner Width: 13"

Strut Outer Width: 13-3/4"

V-Twin Manufacturing 7.25" Left Cut F.Bob Rear Fender - Sold Each

Bobbed rear fender for rigid models has a raw finish with a left side cutout.
Fender measures 7-1/4" wide and 5-1/2" deep and does not include bracket. We suggest pre fitting the fender prior to painting.

Custom application for rigid frame

V-Twin Manufacturing 9" Wide and Ribbed Motorcycle Fender with center bead - Sold Each

Round profile chopper raw fender is 9" wide and ribbed type with center bead.
We suggest pre fitting the fender prior to painting.

Custom application

V-Twin Manufacturing Bobbed Rear Fender For Rigids, 36-57 - Sold Each

Bobbed rear fender for rigid models includes brackets and is 7-3/8" wide.
The inside width of the fender braces measure 8-1/4". We suggest pre fitting the fender prior to painting.

EL 1936-1952
FL 1941-1957
UL 1937-1948

V-Twin Manufacturing Chrome Lower Fender Trim Skirt with Flame fits 1980-Up, 60179-06 - Sold Each
Chrome Lower Fender Trim Skirt with Flame OEM No: 60179-06 Chrome lower fender trim skirt with flame design includes screws. Fits: FLT 1980-UP FLST 1986-UP UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing Dresser Rear Fender Undrilled, 50-0942 - Sold Each

Smooth full type dresser rear fender uses either stock or smooth struts and is constructed of steel.
Measures 6-1/2" wide. For use on 1982-up FXR and 1982-up XL models. We suggest pre fitting the fender prior to painting.

Custom application

V-Twin Manufacturing Rear Fender Round Profile - Sold Each
Round profile chopper raw fender is 6" wide and ribbed type with center bead. Note: All fenders are shipped raw. Fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Note: Preparation is required before priming and