All

DRAG SPECIALTIES Big Buffalo Engine Bar Chrome, Harley 00-10 FX

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Engine Bar Chrome, Harley 04 - 15 XL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Engine Bar Chrome, Not For Use On Models With Fairing Lowers., Harley 09-15 FL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Engine Bar Chrome, Not For Use On Models With Fairing Lowers., Harley 97-08 FL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Engine Bar Gloss Black, Harley 00-15 FL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Engine Bar Gloss Black, Harley 04 - 15 XL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Engine Bar Gloss Black, Harley 93-08 FX

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Engine Bar Gloss Black, Not For Use On Models With Fairing Lowers., Harley 09-15 FL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Saddlebag Bars Black, Harley 14-15 FL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Saddlebag Bars Black, Powder-Coated, Harley 97-13 FL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Saddlebag Bars Chrome, Harley 14-15 FL

• Front bars are made from 1.5" diameter steel tubing
• Rear bars are made from 1.25" diameter steel tubing
• Available with a brilliant show-chrome or black powder-coat finish
• Made in the U.S.A.

DRAG SPECIALTIES Big Buffalo Saddlebag Bars Chrome, Harley 97-13 FL

• Made from 1.25" diameter steel tubing
• Not for use with saddlebag rails.
• Made in the U.S.A.

Engine Guard Touring 97/08 Except Fltr And Models W/Fairing Lowers

• Sweeping style gives form and function to a normally boring piece
• The curved top section incorporates highway pegs to an added use of the guard
• 1 1/4 diameter heavy wall tubing available in finishes as listed

V-FACTOR
Chrome Plated Guard
Fits Touring models 1997/2008 (except FLTR models & models with fairing lowers)
Replaces HD# 49155-05B

Engine Guard,Black Touring Mdls 09/L*,Ex Road Glide & Mdls W/Fairing Lowers

• Sweeping style gives form and function to a normally boring piece
• The curved top section incorporates highway pegs to an added use of the guard
• 1 1/4 diameter heavy wall tubing available in finishes as listed

V-FACTOR
Black Guard
Fits Touring models 2009/Later (except Road Glide models & models with airing Lowers)
Replaces HD# 49442-10

Engine Guard,Chrome Plated Touring Mdls 09/L*,Ex Road Glide & Mdls W/Fairing Lowers

• Sweeping style gives form and function to a normally boring piece
• The curved top section incorporates highway pegs to an added use of the guard
• 1 1/4 diameter heavy wall tubing available in finishes as listed

V-FACTOR
Chrome Plated Guard
Fits Touring Models 2009/Later (except Road Glide models & models with fairing lowers)
Replaces HD# 49155-09A

Engine Guard,Highway Bar Cp Fits 2011/L* Dyna Switchback Unibar Style W/Hardware 1414
Chrome Plated Engine Guard/Highway Bar
Fits Dyna Switchback 2011/Later

V-Twin Manufacturing 1-1/4" Front Engine Bar Chrome, 1986-1999, 49004-90 - Sold Each

Engine bar features 1-1/4" tubing.
WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protectio

V-Twin Manufacturing 1997-Up FLH Tooth R. Frame Bar - Set

Engine bar set features left and right side with 7/8" tubing .
Not for use with saddlebag rails. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstance

V-Twin Manufacturing BT Engine Bar Mount Kit Parkerized 1948-54 - Sold Each
Parkerized spacers, bolts, nuts, and washers to mount the front engine bar. Fits: FL 1948-1954 UOM: 1 - EA Country of Origin: USA

V-Twin Manufacturing Chrome engine guard, 1-1/4" tubing, FLT 2009-UP, 49184-09 - Sold Each

Chrome engine guard features 1-1/4" tubing, and is OE style.

OEM: 49184-09

FLT 2009-UP

V-Twin Manufacturing Chrome Front Engine Bar with Footpeg Pads, FLST 1986-1999 - Sold Each

Engine bar features integrated rubber pads for foot rests.
Does not include hardware. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (f

V-Twin Manufacturing Chrome Front Engine Bar with Footpeg Pads, XL 2004-UP - Sold Each

Engine bar features 1-1/4" tubing with footpeg pads. Includes mounting hardware.
WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They

V-Twin Manufacturing Chrome Front Engine Bar, 1984-1987 with air, 49184-84A - Sold Each
Chrome Front Engine Bar with Air Engine bar features 1-1/4" tubing. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are

V-Twin Manufacturing Chrome Front Engine Bar, 1997-Up FLT 1 " - Sold Each

Bar complements the traditional Touring style and features 1-1/4" tubing.
WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not

V-Twin Manufacturing Chrome Front Engine Crash Bar, 49218-01 - Sold Each
Chrome Front Engine Bar OEM No: 49218-01 Engine bar features 1-1/4" tubing. Warning: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed sli

V-Twin Manufacturing V-Twin Manufacturing

Chrome Front Motorcycle Engine Bar fits FLT 1997-2008

- Sold Each

Chrome Front Motorcycle Engine Bar Bar complements the traditional Touring style and features 1-1/2" diameter tubing. Fits: FLT 1997-2008 UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing Chrome Rear Motorcycle Engine Bar Set fits FLT 1997-2013 - PR
Chrome Rear Buffalo Harley-Davidson Motorcycle Engine Bar Set Engine bar set features left and right sides with 1-1/4" tubing. Does not allow the use of clamp on saddlebag guards. WARNING: This engine/frame bar may provide limited leg and

Engine bar features 1-1/4" tubing and single top mount hole.
Includes U-bolts, nuts, and straight bolt. The width between bottom mount plates measures 12" outside to outside. The height from the top of the bottom mounts to the center of the top mount hole is 14-3/5". WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.

Fits 1995-2003 FXDWG

V-Twin Manufacturing Engine Guard, 1997-08 FLT - Sold Each

Engine bar features integrated rubber pads for foot rests.
WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor inten

V-Twin Manufacturing Engine Guard, 2000-up FLST - Sold Each

Engine bar features integrated rubber pads for foot rests.
The engine bar has a diameter of 1-5/16". **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very l

V-Twin Manufacturing Engine Guard, 2009-up FLT - Sold Each

Engine bar features integrated rubber pads for foot rests.
WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor inten

V-Twin Manufacturing Front Engine Bar 1 ", 1991-05 FXD Dyna - Sold Each

Engine bar features 1-1/4" tubing.
Not for use with forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped,