All

Lowering Kit Softail 89/99 Single Action

• These kits are designed to be used with OEM rear shocks to lower a Softail model motorcycle as much at 2 depending on the kit used
• After the shocks are removed from the bike, installing the kit can be done by using a shop press or you can use 20107 shock spring compressor
• Installation instructions are included with all kits except V-FACTOR

V-FACTOR
Stainless Steel Finish
Not adjustable on bike
Fits Softail 1989/1999
Use OE rubber bumpers & cup washers
(Imported)

PINGEL Black Rear Shock Lowering Bracket Kit, Harley 97-01 FL

• Makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with its lower center of gravity
• Lowers your bike 1" leaving adequate room for stock tire-to-fender clearance; designed to retain the use of the stock rubber shock boot
• CNC-machined with a black finish
• Easy to install in approximately 30 minutes with common tools, and includes instructions and hardware
• Made in the U.S.A.

Rear Fork Lowering Kit,Adj Cp St 00/L* (Ex 05/L* Flstn)Stock Height To 2" Lower

• These kits are designed to be used with OEM rear shocks to lower a Softail model motorcycle as much at 2 depending on the kit used
• After the shocks are removed from the bike, installing the kit can be done by using a shop press or you can use 20107 shock spring compressor
• Installation instructions are included with all kits except V-FACTOR

V-FACTOR
Chrome Plated Finish
Adjustable from Stock to -2
Fits Softail 2000/Later
(Imported)

Rear Fork Lowering Kit,Adj Cp St 00/L* (Ex 05/L* Flstn)Stock Height To 2" Lower

• These kits are designed to be used with OEM rear shocks to lower a Softail model motorcycle as much at 2 depending on the kit used
• After the shocks are removed from the bike, installing the kit can be done by using a shop press or you can use 20107 shock spring compressor
• Installation instructions are included with all kits except V-FACTOR

V-FACTOR
Chrome Plated Finish
Adjustable from Stock to -2
Fits Softail 2000/Later
(Imported)

Rear Fork Lowering Kit,Adj Ss St 00/L* (Ex 05/L* Flstn) Adjust From Stock To 2" Lower

• These kits are designed to be used with OEM rear shocks to lower a Softail model motorcycle as much at 2 depending on the kit used
• After the shocks are removed from the bike, installing the kit can be done by using a shop press or you can use 20107 shock spring compressor
• Installation instructions are included with all kits except V-FACTOR

V-FACTOR
Stainless Steel Finish
Adjustable from Stock to -2
Fits Softail 2000/Later
Use OE rubber bumpers & cup washers
(Imported)

Rear Shock Lowering Bracket Fl Models 1997/2001 Lowers 1",Black Billet Alum

• Lowers your L 1 leaving adequate room for stock tire to fender clearance and is designed to retain the use of the stock rubber shock boot
• Makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with Fits lower center of gravity
• CNC machined from billet aluminum with a black finish
• Designed to be used with OE shocks
• Saddlebag modifications are necessary for installation on FLHRC models
• Installs in about 30 minutes with common tools and includes instructions & hardware

Pingel
Black Finish Brackets
Fits L models 1997/2001

Rear Shock Lowering Kit,Black Flhx 2002/2010 Lowers 1 Or 2" W/ Hardware

• Reduces rear ride height by moving the lower shock mount further back
• More economical than buying shorter shocks
• Includes instructions & hardware
• See the front end section for front lowering kits

V-FACTOR
Black, -1 Ride Height
Fits FLHX 2002/2010
Note: On bagger models check shock tunnel on inside of bags for clearance
(Imported)

V-Twin Manufacturing 00-03 XL 1"Rear Lowering Kits XL - Set

Black rear lowering kit lowers rear frame area 1".
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over b

V-Twin Manufacturing 00-04 XL Chrome Lowering Kit XL - Kit

Chrome rear lowering kit lowers rear frame area 1".
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over

V-Twin Manufacturing 20th Century Fork Spring Lowering Kit, 35 mm, 1984-87 FX-FXR - Kit

Fork springs feature high quality and high performance.
Springs elminate front end sag, reduce nose dive under braking, improve cornering stability, increase ride comfort and allow forks to utilize full travel.

XL 1975-1987
FX 1975-1982

V-Twin Manufacturing 20th Century Fork Spring Lowering Kit, 39 mm, 1987-up FXR - Kit

Progressive fork springs feature high quality and high performance.
Springs eliminate front end sag, reduce nose dive uinder braking, improve cornering stability, increase ride comfort and allow forks to utilize full travel.

XL 1988-UP
FXR

V-Twin Manufacturing 89-99 XL Chrome Lowering Kit XL - Kit

Chrome rear lowering kit lowers rear frame area 1".
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming, especially over

V-Twin Manufacturing Adjustable Shock Set, Chrome, 1989-99 - Set
Chrome Adjustable Motorcycle Shock Set OEM No: 54508-89A Shocks are chrome and adjustable and can lower your bike up to 1.5". Now with these shocks you can lower your bike for the look you want or the height you need. Warning:Installi

V-Twin Manufacturing Adjustable Shock Set, Chrome, Steel Body, 1989-99 ST - Set
This slim fit shock set features a smaller diameter to allow more room for custom installation. Great for use with an offset transmission. Has beautiful steel chrome finish. Small diameter provides greater clearance for transmission mounting studs. B

V-Twin Manufacturing Aee 1993-05 FXD Shock Set, 11.5? - Set
Chrome 11-1/2" shock set lowers bike 1". The shocks bolt directly in place of your stock shocks and require no modifications. Stock shock length for 1993-2004 Dyna models are 12-5/8". Warning:Installing a lowering kit or shorter shocks will decrease

V-Twin Manufacturing Aee Low Touring Shock Set, Chrome, 1991-01 FLT - Set
OEM No: 54631-98 AEE chrome shocks will lower the seat height up to 3/4" with out altering the ride. Shocks have been revalved for a comfortable ride. The air adjustable feature of stock shocks is retained. Warning:Installing a lowering kit or s

V-Twin Manufacturing Aee Low Touring Shock Set, Chrome, 2002-up FLT - Set
OEM No: 54631-02A AEE chrome shocks will lower the seat height up to 3/4" with out altering the ride. Shocks have been revalved for a comfortable ride. The air adjustable feeture of stock shocks is retained. Warning:Installing a lowering kit or

V-Twin Manufacturing Chrome rear lowering kit lowers rear frame area 1" for Sportsters - Kit
Rear Shock Lowering Kit Chrome Chrome rear lowering kit lowers rear frame area 1". Warning:Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be ta

V-Twin Manufacturing Full Lowering Kits, 2000-06 ST - Kit

Full lowering kit includes components to lower the front and rear of a Softail model.
Full lowering kit includes shorter damper rods, 1" shorter kickstand and adjustable rear shock lowering set. The front of the FXST is lowered 2-1/2" and 2" on FLST

V-Twin Manufacturing Lowering Kit, 2000-up ST - Set

Lowering kit for Softail is fully adjustable shock link for Softails. Left hand threaded design allows adjustments in sm all increments from stock to the drop of your choice. Allows 1-1/2" lowering.

FXST 2000-UP

V-Twin Manufacturing Motorcycle Rear Shock Lowering Kit Black fits FLT 1997-2001 - Kit
Rear Shock Lowering Kit Black Kit lowers rear frame area 1-1/2". Includes instructions, hardware and black brackets Warning: Installing a lowering kit or shorter shocks will decrease intial ground clearance. The motorcycle will be lower to

V-Twin Manufacturing progressive Suspension Fork Lowering Kit 84-Up FXST,FLST - Kit

Progressive suspension fork spring lowering kit comes with Progressive rate fork springs and spacers.
Kit can be installed at two different levels to lower fork 1" or 2". This is a drop in lowering kit but requires the use of 2001 and earlier fork d

V-Twin Manufacturing Rear Motorcycle Shock Lowering Kit Black, fits FXDG 2000-2005 - Kit

Black rear shock lowering kit includes instructions, hardware and black brackets.
Kit lowers rear frame area 1". Warning: Installing a lowering kit or shorter shocks will decrease intial ground clearance. The motorcycle will be lower to the ground a

V-Twin Manufacturing Shock Lowering Kit, Rear, Black, 1991-99 FXDG 1 - Sold Each

Kit lowers rear frame area 1". Includes instructions, hardware and black brackets.
Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to av

V-Twin Manufacturing Shock Lowering Kit, Rear, Black, 2002-2003 FLT 11-2 - Kit

Kit lowers rear frame are 1-1/2". Includes instructions, hardware and black brackets.
Warning: Installing a lower kit or shorter shocks will decrease intial ground clearance. The motorcycle will be lower to the ground and care should be taken to avo

V-Twin Manufacturing Shock Lowering Kit, Rear, Black, 2004-up FLT 1 - Kit

Black kit lowers rear frame area 1". Includes instructions, hardware and black brackets.

FLT 2004-UP

V-Twin Manufacturing Shock Lowering Kit, Rear, Black, 2004-up FLT 1.5 - Kit

Kit lowers rear frame area 1-1/2". Includes instructions, hardware and black brackets.

FLT 2004-UP

WILD 1 Adjustable Rear Lowering Kit, Harley 00-15 FX 00-15 FL

• Reduces height as much as two inches
• Once installed, the look and feel of the bike can be customized to rider's preference
• Made in the U.S.A.