All

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Center Fill With Battery Box

• These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
• 3.5 quart with battery tray
• Lower left hand relief for use with a chain or belt rear drive
• The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
• Tank body measures 6 ¹/₂ O.D.
• Made from 16 gauge steel to resist cracking
• 100% TIG welded for maximum strength
• Includes heavy duty front mount and fill plug
• Use with Softail size battery and OE style rear tank mount
• Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
• or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Raw Steel lat Side Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

DRAG SPECIALTIES Chrome Oil Tank, 3 quart, Natural, Steel, Each, specific application, Harley 82-00 FX 87 - 94 XL

• Formed steel construction with a chrome finish
• Bolt-in application; uses OEM mounts
• Fittings, clamps and hoses included
• Approximately 3.0 quart capacity

DRAG SPECIALTIES Custom Side Fill Oil Tank, Harley 84-99 FX 86-99 FL

• Chrome-plated steel construction
• Includes mounting tabs
• Available in side or center fill
• Domed ends
• Designed with built-in battery box
• Approximately 3.3 quart capacity

Oil Tank Custom Round 3.5 Qts Hardbody St,Rigid & Custom Frames Side Fill W/Bty Box Cp

• These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
• 3.5 quart with battery tray
• Lower left hand relief for use with a chain or belt rear drive
• The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
• Tank body measures 6 ¹/₂ O.D.
• Made from 16 gauge steel to resist cracking
• 100% TIG welded for maximum strength
• Includes heavy duty front mount and fill plug
• Use with Softail size battery and OE style rear tank mount
• Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
• or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Chrome Plated lat Side, Side ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Oil Tank,Custom Round 3.5 Qts Hardbody St,Rigid & Custom Frames Ctr Fill W/Bty Box Cp

• These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
• 3.5 quart with battery tray
• Lower left hand relief for use with a chain or belt rear drive
• The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
• Tank body measures 6 ¹/₂ O.D.
• Made from 16 gauge steel to resist cracking
• 100% TIG welded for maximum strength
• Includes heavy duty front mount and fill plug
• Use with Softail size battery and OE style rear tank mount
• Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
• or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Chrome Plated lat Side Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

Round Oil Tank With Domed Ends Hardbody St,Rigid & Custom Frames Ctr Fill W/Bty Box Cp

• These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
• 3.5 quart with battery tray
• Lower left hand relief for use with a chain or belt rear drive
• The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
• Tank body measures 6 ¹/₂ O.D.
• Made from 16 gauge steel to resist cracking
• 100% TIG welded for maximum strength
• Includes heavy duty front mount and fill plug
• Use with Softail size battery and OE style rear tank mount
• Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
• or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Chrome Plated Domed Side with Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

V-Twin Manufacturing 5 Rocket Oil Tanks, Raw, Right, Rigid, ST - Sold Each

Our 5" diameter raw rocket oil tank has right side fittings. The tank is for Softail and rigid frames and measures 13" long.

Battery Box Length: 3-1/2"

Battery Box Width: 7-3/16"

FXST 1986-1999
FLST 1986-1999