All

ANDREWS Valve Spring Collars, Exhaust, Intake, made in the usa, 4-Pack, specific application, Harley 84-04 FX 84-04 FL 86 - 03 XL

• Provide .050" more spring travel than stock
• Stronger and lighter than stock
• Use stock keepers
• Sold as set of four
• Made in the U.S.A.

Beehive Valve Spring Kit Big Twin 2005/Later* Uw 7Mm Valves & Oe Locks 9709-Kit

• The centerpiece of both kits are the advanced COMP^® Beehive^™ Valve Springs, which deliver a host of well documented benefits over conventional valve springs
• With the limited valve spring installed height of the Harley V-Twin engine, small spring pocket and today's higher lift cams, the VThunder engineers faced a challenge in designing an all-inclusive kit that would provide proper installation fo the Beehive^™ Valve Springs
• After enxtensive testing and research, the proper combination of parts has been identified and is now available
• Both kits utilize the Beehive^™ Valve Springs, but the 61378 kit allows for use of the stock 7mm valves and stock locks and the 61377 kit is designed for ⁵/₁₆ valves and includes high performance 10° Super Locks^™ for added strength

Spring Specifications

• 1.185/1.45 4 O.D.
• .731/1.00 I.D.
• 160# @ 1.8000 (.650 Lift)
• 140# @ 1.850 (.700 Lift)
• 400# @ 1.150
• Coil bind 1.100
• Spring rate 4000

VThunder
Fits Twin Cam 2005/Later

Beehive Valve Spring Kit Bt Evo Itc 99/04,Evo Spt 86/03 Steel Valve Collars 9708-Kit

• The centerpiece of both kits are the advanced COMP^® Beehive^™ Valve Springs, which deliver a host of well documented benefits over conventional valve springs
• With the limited valve spring installed height of the Harley V-Twin engine, small spring pocket and today's higher lift cams, the VThunder engineers faced a challenge in designing an all-inclusive kit that would provide proper installation fo the Beehive^™ Valve Springs
• After enxtensive testing and research, the proper combination of parts has been identified and is now available
• Both kits utilize the Beehive^™ Valve Springs, but the 61378 kit allows for use of the stock 7mm valves and stock locks and the 61377 kit is designed for ⁵/₁₆ valves and includes high performance 10° Super Locks^™ for added strength

Spring Specifications

• 1.185/1.45 4 O.D.
• .731/1.00 I.D.
• 160# @ 1.8000 (.650 Lift)
• 140# @ 1.850 (.700 Lift)
• 400# @ 1.150
• Coil bind 1.100
• Spring rate 4000

V-Thunder
Fits Big Twin Evolution 1984/1999, Twin Cam 1999/2004 & Sportster 1986/2003

EASTERN MOTORCYCLE PARTS Valve Spring Upper Collars, Exhaust, Intake, made in the usa, Steel, 4-Pack, specific application, Harley 05-16 FX 05-16 FL

• OEM-quality replacements
• Sold in 4-packs
• Made in the U.S.A.

FEULING OIL PUMP CORP. Econo Beehive Valve Spring Kit, .585" Lift, 7mm, Harley 05-16 FX 02-16 FL 04 - 16 XL

• Made from premium stress-relieved conical ovate wire
• Feature extremely high-level of fatigue life
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Designed to handle the demands of performance engines with 585" and smaller lift camshafts
• Available for 5/16" and 7mm valves
• Kits include: Econo BeeHive valve springs, lightweight 7 steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 183 lbs. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0.574" lift), 160 lbs. at 1.845" (0.585" lift), 380 lbs. at 1.260" OPEN HEIGHT coil bind at 1.190"
• Dyno proven and track tested
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. Econo Beehive Valve Spring Kit, stem diameter 5/16", Harley 84-04 FX 84-04 FL 86 - 03 XL

• Made from premium stress-relieved conical ovate wire
• Feature extremely high-level of fatigue life
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Designed to handle the demands of performance engines with 585" and smaller lift camshafts
• Available for 5/16" and 7mm valves
• Kits include: Econo BeeHive valve springs, lightweight 7 steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 183 lbs. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0.574" lift), 160 lbs. at 1.845" (0.585" lift), 380 lbs. at 1.260" OPEN HEIGHT coil bind at 1.190"
• Dyno proven and track tested
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. Endurance Beehive Valve Springs

• Machined from premium-grade hi-tensile chrome silicon single-conical ovate wire
• Shot-peened with specially processed thermal heat treat and super NexTex finish for fatigue life needed to exceed high demands of V-Twin engines
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Direct bolt-in replacement up to 650" cam lift; no machining or rocker box clearancing required
• Available for 5/16" and 7mm valves
• Kits include: Endurance BeeHive valve springs, lightweight 7 super Titanium heat-treated retainers, machined spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 198 lbs. at 1.685" (.535" lift), 194 lbs. at 1.703" (.553" lift), 190 lbs. at 1.724" (.574" lift), 187 lbs. at 1.754" (.604" lift), 185 lbs. at 1.780" (.630" lift), 160 lbs. at 1.800" (.650" lift), 375 lbs. at 1.150" (open height) coil bind at 1.100"
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. Endurance Beehive Valve Springs, 4-Pack, 7mm, Harley 05-16 FX 02-16 FL 04 - 16 XL

• Machined from premium-grade hi-tensile chrome silicon single-conical ovate wire
• Shot-peened with specially processed thermal heat treat and super NexTex finish for fatigue life needed to exceed high demands of V-Twin engines
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Direct bolt-in replacement up to 650" cam lift; no machining or rocker box clearancing required
• Available for 5/16" and 7mm valves
• Kits include: Endurance BeeHive valve springs, lightweight 7 super Titanium heat-treated retainers, machined spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 198 lbs. at 1.685" (.535" lift), 194 lbs. at 1.703" (.553" lift), 190 lbs. at 1.724" (.574" lift), 187 lbs. at 1.754" (.604" lift), 185 lbs. at 1.780" (.630" lift), 160 lbs. at 1.800" (.650" lift), 375 lbs. at 1.150" (open height) coil bind at 1.100"
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. Endurance Beehive Valve Springs, 4-Pack, stem diameter 5/16", Harley 84-04 FX 84-04 FL 86 - 03 XL

• Machined from premium-grade hi-tensile chrome silicon single-conical ovate wire
• Shot-peened with specially processed thermal heat treat and super NexTex finish for fatigue life needed to exceed high demands of V-Twin engines
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Direct bolt-in replacement up to 650" cam lift; no machining or rocker box clearancing required
• Available for 5/16" and 7mm valves
• Kits include: Endurance BeeHive valve springs, lightweight 7 super Titanium heat-treated retainers, machined spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 198 lbs. at 1.685" (.535" lift), 194 lbs. at 1.703" (.553" lift), 190 lbs. at 1.724" (.574" lift), 187 lbs. at 1.754" (.604" lift), 185 lbs. at 1.780" (.630" lift), 160 lbs. at 1.800" (.650" lift), 375 lbs. at 1.150" (open height) coil bind at 1.100"
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. High-Load Beehive Valve Springs

• Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen polish
• Feature extremely high level of fatigue life
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Designed to handle the highest demands of performance engines with high-lift, steep-ramped camshafts
• Allow up to 750" lift cams; no rocker box clearancing required
• Available for 5/16" and 7mm valves
• Kits include: High-Load BeeHive valve springs, lightweight 10 Titanium retainers manufactured from Ti-17 alloy and micropolished for enhanced fatigue life, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 217 lbs. at 1.789" (.574" lift), 215 lbs. at 1.800" (.585" lift), 208 lbs. at 1.819" (.604" lift), 200 lbs. at 1.845" (.630" lift), 185 lbs. at 1.900" (.685" lift), 170 lbs. at 1.935" (.720" lift), 415 lbs. at 1.215" (open height) coil bind at 1.125"
• Dyno proven and track tested
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. High-Load Beehive Valve Springs, 7mm, Harley 05-16 FX 02-16 FL 04 - 16 XL

• Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen polish
• Feature extremely high level of fatigue life
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Designed to handle the highest demands of performance engines with high-lift, steep-ramped camshafts
• Allow up to 750" lift cams; no rocker box clearancing required
• Available for 5/16" and 7mm valves
• Kits include: High-Load BeeHive valve springs, lightweight 10 Titanium retainers manufactured from Ti-17 alloy and micropolished for enhanced fatigue life, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 217 lbs. at 1.789" (.574" lift), 215 lbs. at 1.800" (.585" lift), 208 lbs. at 1.819" (.604" lift), 200 lbs. at 1.845" (.630" lift), 185 lbs. at 1.900" (.685" lift), 170 lbs. at 1.935" (.720" lift), 415 lbs. at 1.215" (open height) coil bind at 1.125"
• Dyno proven and track tested
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. High-Load Beehive Valve Springs, stem diameter 5/16", Harley 84-04 FX 84-04 FL 86 - 03 XL

• Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen polish
• Feature extremely high level of fatigue life
• Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
• Designed to handle the highest demands of performance engines with high-lift, steep-ramped camshafts
• Allow up to 750" lift cams; no rocker box clearancing required
• Available for 5/16" and 7mm valves
• Kits include: High-Load BeeHive valve springs, lightweight 10 Titanium retainers manufactured from Ti-17 alloy and micropolished for enhanced fatigue life, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
• Seat lbs./installed height; 217 lbs. at 1.789" (.574" lift), 215 lbs. at 1.800" (.585" lift), 208 lbs. at 1.819" (.604" lift), 200 lbs. at 1.845" (.630" lift), 185 lbs. at 1.900" (.685" lift), 170 lbs. at 1.935" (.720" lift), 415 lbs. at 1.215" (open height) coil bind at 1.125"
• Dyno proven and track tested
• Feuling BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
• Made in the U.S.A.

FEULING OIL PUMP CORP. Titanium Valve Spring Retainer Kit, Harley 84-04 FX 84-04 FL 86 - 03 XL

• Can be used to upgrade Screamin' Eagle performance Beehive valve springs to titanium retainers
• Can be used on Feuling Econo Beehive valve springs kits to update steel retainers to titanium
• PART #0926-2264 includes retainers, steel triple-groove keepers and Viton valve seals for factory guides, can be used with PART #0926-1468
• PART #0926-2265 includes retainers, standard height steel keepers, machined steel spring seats and Viton valve seals for factory guides
• Made in the U.S.A.

KIBBLEWHITE Valve Spring Kit, 160 - 170 lb., Harley 05-16 FX 02-16 FL 04 - 16 XL

• Designed for maximum performance
• Feature interference-wound, double-chrome silicone springs; heat-treated steel base washers
• Available in a complete set for one engine
• Include steel retainers
• Made in the U.S.A.

KIBBLEWHITE Valve Spring Kit, 170 - 180 lb., Harley 84-04 FX 84-04 FL 86 - 03 XL

• Designed for maximum performance
• Feature interference-wound, double-chrome silicone springs; heat-treated steel base washers
• Available in a complete set for one engine
• Include steel retainers
• Made in the U.S.A.

S&S CYCLE Sidewinder .650" Valve Spring Kit, Harley 05-16 FX 05-16 FL

• Include springs, upper and lower collars and keys
• For valve lift to .650" with 1.860"/178 lbs. installed height, 376 lbs. at max lift
• Max 6500 rpm
• Made in the U.S.A.

S&S CYCLE Sidewinder .650" Valve Spring Kit, Harley 84-04 FX 84-04 FL 86 - 03 XL

• Include springs, upper and lower collars and keys
• For valve lift to .650" with 1.860"/178 lbs. installed height, 376 lbs. at max lift
• Max 6500 rpm
• Made in the U.S.A.

S&S CYCLE Valve Spring Kit, Harley 05-16 FX 05-16 FL

• Unique S&S design dual-spring kit reduces the risk of valve float
• For valve lift to .585" with 1.800"/130 lb. installed height, 325 lb. at max lift
• Includes springs, top and bottom collars, keeper shims and valve seals
• Made in the U.S.A.

S&S CYCLE Valve Spring Kit, Harley 84-04 FX 84-04 FL 86 - 03 XL

• Unique S&S design dual-spring kit reduces the risk of valve float
• For valve lift to .585" with 1.800"/130 lb. installed height, 325 lb. at max lift
• Includes springs, top and bottom collars, keeper shims and valve seals
• Made in the U.S.A.

V-THUNDER Beehive Valve Spring Kit, 7mm, Harley 05-16 FX 05-16 FL

• Beehive Valve Spring Kits designed as drop-in performance valve train upgrades
• Beehive valve springs deliver a host of well-documented benefits over conventional cylindrical valve springs
• Increased rpm capability with no rocker box clearance problems
• Designed to work with the limited valve spring installed height of the Harley V-Twin engine, small spring pocket and high-lift cams
• Made in the U.S.A.

V-THUNDER Beehive Valve Spring Kit, stem diameter 5/16", Harley 84-04 FX 84-04 FL 87 - 94 XL

• Beehive Valve Spring Kits designed as drop-in performance valve train upgrades
• Beehive valve springs deliver a host of well-documented benefits over conventional cylindrical valve springs
• Increased rpm capability with no rocker box clearance problems
• Designed to work with the limited valve spring installed height of the Harley V-Twin engine, small spring pocket and high-lift cams
• Made in the U.S.A.

V-Twin Manufacturing 10pk Rocker Arm Springs XL - Pack

Rocker arm springs is a OEM replacement.

OEM: 17483-57

XL 1957-1985

V-Twin Manufacturing AndREWS High Lift Valve SpringS XL - Set

Andrews high lift valve springs .550+, no machining required .

FXST 1984-1998
FLST 1986-1998
FXD 1991-1998
FLT 1986-1998
FXR 1984-1994
XL 1986-UP

V-Twin Manufacturing Motorcycle Valve Spring Kit, XL 1970-1984 - Kit

Sifton valve spring kit includes springs, keepers, retainer, and lower collars. For 160lb seat pressure up to .460" valve travel.
May require R model valve to achieve installed height.

XL 1970-1984

V-Twin Manufacturing Replica Valve Spring Kit, 1936-47 Knucklehead, 8 Pc - Set

Replica valve spring set includes 4 inner and 4 outer springs,

OEM: 18203-36

FL 1941-1947

V-Twin Manufacturing Replica Valve Spring Set - Set
Replica Knucklehead valve spring set includes inner and outer springs. Order collars and keepers separately. Fits: EL 1936-1940 FL 1941-1947 UOM: 8 - SET Country of Origin: USA

V-Twin Manufacturing Sifton Valve Spring Kit XL - Kit

Sifton valve spring kit includes inner and outer valve spring, upper and lower valve spring collars, shims and keepers.
Will work with up to a .600" lift.

FXST 1984-1998
FXR 1984-1994
FXD 1991-1998
FLST 1986-1998
FLT 1986-1998

V-Twin Manufacturing Valve Spring Set XL - Set

Valve spring kit includes inner and outer as required.

OEM: 18201-83

FXST 1984-2004
FLT 1984-2004
FLST 1986-2004
FXR 1984-1994
FXD 1991-2004

V-Twin Manufacturing Valve Spring Kit w-Collars,Keepers XL - Kit

Valve spring kit includes all springs, collars and keepers necessary.

FXST 1984-1998
FXR 1984-1994
FXD 1991-1998
FLST 1986-1998
FLT 1986-1998
XL 1986-UP

V-Twin Manufacturing Valve Spring Kit, 1957-81 XL - Kit

Valve spring kit includes all springs, collars and keepers necessary.

XL 1957-1981

V-Twin Manufacturing Valve Spring Kit, 1983-85 XL - Kit

Valve spring kit includes all springs, collars and keepers necessary.

XL 1983-1985

V-Twin Manufacturing Valve Spring Set fits 1936-1947, 18203-36 - Set
Valve Spring Set OEM No: 18203-36 Replica type valve spring set has 4 inner and 4 outer springs for Knuckleheads. Fits: EL 1936-1940 FL 1941-1947 UOM: 8 - SET Country of Origin: USA

V-Twin Manufacturing Valve Spring Set, 1957-81 XL - Set

Valve Spring only

OEM: 18203-57A

XL 1957-1982

V-Twin Manufacturing Valve Spring Set, 1981-83 XL - Set

Valve spring only

OEM: 18203-83

XL 1983-1985

Valve Spring Collar, Lower Stk Big Twin 1948/1979 All Models Replaces Stk Rpls Hd 18222-48

• The very best quality OE replacement, these American made steel Valve Spring Collars meet or exceed OEM specifications

HARDWARE
Lower Collars (Pack of 4)
Fit Big Twin 1948/1979
Replaces HD# 18222-48