All

EMGO FUEL LINE 3/16"RNFRCD 25F, Black, 25', Reinforced

• Universal, black fuel/oil line in 25' rolls
• Reinforced line is fuel- and oil-resistant

NOTE: Do not use with fuel containing more than 10% alcohol.

MOOSE RACING 3' Blue 1/4" Fuel Line, made in the usa, Polyurethane, Each, Universal

• This quality-made fuel line will not harden or crack
• Fuel line is made of premium polyurethane
• Available in 1/4", 3/16", and 5/16" i.d.; carburetor vent line available in 1/8" i.d.
• Fuel line available in 3' lengths
• Carb vent line comes in 5' lengths
• Available in black, blue, clear, green, orange, red and yellow
• Made in the U.S.A.

NOTE: Not to be used with fuel over 10% alcohol.

MOOSE RACING 3' Green 1/4" Fuel Line, made in the usa, Polyurethane, Each, Universal

• This quality-made fuel line will not harden or crack
• Fuel line is made of premium polyurethane
• Available in 1/4", 3/16", and 5/16" i.d.; carburetor vent line available in 1/8" i.d.
• Fuel line available in 3' lengths
• Carb vent line comes in 5' lengths
• Available in black, blue, clear, green, orange, red and yellow
• Made in the U.S.A.

NOTE: Not to be used with fuel over 10% alcohol.

MOOSE RACING 3' x 3/16" Green Fuel Line, made in the usa, Polyurethane, Each, Universal

• This quality-made fuel line will not harden or crack
• Fuel line is made of premium polyurethane
• Available in 1/4", 3/16", and 5/16" i.d.; carburetor vent line available in 1/8" i.d.
• Fuel line available in 3' lengths
• Carb vent line comes in 5' lengths
• Available in black, blue, clear, green, orange, red and yellow
• Made in the U.S.A.

NOTE: Not to be used with fuel over 10% alcohol.

MOOSE RACING 3' x 3/16" Red Fuel Line, made in the usa, Polyurethane, Each, Universal

• This quality-made fuel line will not harden or crack
• Fuel line is made of premium polyurethane
• Available in 1/4", 3/16", and 5/16" i.d.; carburetor vent line available in 1/8" i.d.
• Fuel line available in 3' lengths
• Carb vent line comes in 5' lengths
• Available in black, blue, clear, green, orange, red and yellow
• Made in the U.S.A.

NOTE: Not to be used with fuel over 10% alcohol.

MOOSE RACING 3' x 3/16" Yellow Fuel Line, made in the usa, Polyurethane, Each, Universal

• This quality-made fuel line will not harden or crack
• Fuel line is made of premium polyurethane
• Available in 1/4", 3/16", and 5/16" i.d.; carburetor vent line available in 1/8" i.d.
• Fuel line available in 3' lengths
• Carb vent line comes in 5' lengths
• Available in black, blue, clear, green, orange, red and yellow
• Made in the U.S.A.

NOTE: Not to be used with fuel over 10% alcohol.

MOOSE RACING 3' x 5/16" Green Fuel Line, made in the usa, Polyurethane, Each, Universal

• This quality-made fuel line will not harden or crack
• Fuel line is made of premium polyurethane
• Available in 1/4", 3/16", and 5/16" i.d.; carburetor vent line available in 1/8" i.d.
• Fuel line available in 3' lengths
• Carb vent line comes in 5' lengths
• Available in black, blue, clear, green, orange, red and yellow
• Made in the U.S.A.

NOTE: Not to be used with fuel over 10% alcohol.

MOOSE RACING 3' Yellow 1/4" Fuel Line, made in the usa, Polyurethane, Each, Universal

• This quality-made fuel line will not harden or crack
• Fuel line is made of premium polyurethane
• Available in 1/4", 3/16", and 5/16" i.d.; carburetor vent line available in 1/8" i.d.
• Fuel line available in 3' lengths
• Carb vent line comes in 5' lengths
• Available in black, blue, clear, green, orange, red and yellow
• Made in the U.S.A.

NOTE: Not to be used with fuel over 10% alcohol.

MOTION PRO 1/4" Single Valve Fuel Line Quick-Disconnect Coupling, Single Shut-off Valve 1/4", Fuel Line Couplings

• Single or dual shut-off valves
• When connected fuel will flow and when disconnected fuel will not flow
• Use dual shut-off for fuel tanks equipped with a crossover line
• For fuel supply (fuel tank to carburetor), use the original quick-disconnect couplings with the single shut-off valve
• Available for 1/4" and 5/16" i.d. fuel line
• Capable of withstanding temperatures of -40 F to 180 F
• These quick-disconnect fittings utilize Nitrile (Buna N) O-rings and may not be compatible with some race fuels
• Made in the U.S.A.

MOTION PRO 5/16" Dual Valve Fuel Line Quick-Disconnect Coupling, Dual Shut-off Valve 5/16", Fuel Line Couplings

• Single or dual shut-off valves
• When connected fuel will flow and when disconnected fuel will not flow
• Use dual shut-off for fuel tanks equipped with a crossover line
• For fuel supply (fuel tank to carburetor), use the original quick-disconnect couplings with the single shut-off valve
• Available for 1/4" and 5/16" i.d. fuel line
• Capable of withstanding temperatures of -40 F to 180 F
• These quick-disconnect fittings utilize Nitrile (Buna N) O-rings and may not be compatible with some race fuels
• Made in the U.S.A.

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 1/4"

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 1/4", Y-connector

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 3/16"

• Contains a wide selection of Y and T fittings, hose clamps, O-clips and O-clip front jaw pincher tool
• Sizes from 3/16"-3/8"
• Includes 40 assorted O-clips, 40 assorted Y-connectors, 40 assorted T-connectors, hose clamps
• Includes ABS storage case
• Replacements available in packs of 10 are listed below
• Ideal for the shop or home mechanic
• Made in the U.S.A.

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 3/16", Y-connector

• Contains a wide selection of Y and T fittings, hose clamps, O-clips and O-clip front jaw pincher tool
• Sizes from 3/16"-3/8"
• Includes 40 assorted O-clips, 40 assorted Y-connectors, 40 assorted T-connectors, hose clamps
• Includes ABS storage case
• Replacements available in packs of 10 are listed below
• Ideal for the shop or home mechanic
• Made in the U.S.A.

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 3/8"

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 5/16"

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 5/16", Y-connector

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

TECMATE Santoprene Fuel/Oil Resistant 3' Hose, Carbmate, Fuel- and Oil-Resistant Hose

• The extended vacuum adapter includes 11/2' of santoprene hose and is ideal for permanent mounting on sportbikes or any other vehicles where access to the carburetor or fuel-injection synchronizing ports requires removal of various side panels, air filters or the fuel tank
• The unique flexi-rigid adapter easily allows synchronization of machines with difficult-to-reach 5mm or 6mm carburetor or fuel-injection vacuum ports; simply bend the outer sheath to the appropriate angle/shape and then turn the inner tube to thread the brass fitting into the vacuum port
• Sold each