All

V-Twin Manufacturing Bob-Tank Tab Set 4Pc - Set

Four piece tab set for top, bottom, right and left sides of the tank must be welded on.

FL 1941-1984
FXS 1979-1982

V-Twin Manufacturing Chrome 45 Gas Tank Panel, 45s and Servi 1937-1973 - Sold Each

Chrome gas tank panel

G 1937-1973
WL 1937-1952

V-Twin Manufacturing Flat Side Universal Tank Mount Kit, 1985-99 - Kit

Frame saver gas tank mount kit includes front and rear tank mount.
Kit is for flat side type gas tanks. Temporarily attach one tank half by clamping bracket for a quick check of tank placement on custom applications. Bracket assembly can then be wel

V-Twin Manufacturing Flatside Gas Tank Mounting Kit, 38-0240 - Sold Each

Kit includes front and rear tank mounts.
Gas tank mount kit provides a way to mount bobbed tanks to custom or original frames. Temporarily attach one tank half by clamping bracket for a quick check of tank placement on custom applications. Bracket a

V-Twin Manufacturing Frame saver Gas Tank Mount Kit, 1936-84 Stock - Kit

Frame saver gas tank mount kit includes front and rear tank mount, lower tank mount, clamps, and hardware.
Temporarily clamp bracket in place and install one half of the tank to check placement on all applications. Bracket assembly can then be welde

V-Twin Manufacturing Frame Saver Kit, 1936-85 Big Twin frames - Kit

Frame saver mounting kit for gas tanks must be welded to Big Twin stock or custom frames.

FL 1941-1984
EL 1936-1947
U 1937-1948

V-Twin Manufacturing Gary Bang Left Side Gas Cap Gasket - Pack

Left side gas cap gaskets

OEM: 61116-65

FL 1965-1982

V-Twin Manufacturing Gas & Oil Cap Set, Chrome, 1936-73 Solo - Kit

Chrome gas cap and oil cap set

OEM: 61104-37

G 1936-1973
WL 1936-1952

V-Twin Manufacturing Gas Cap Set, Chrome, 1947-65 Big Twin - Set

Chrome gas cap set is stock style and comes vented and non- vented. Vented cap fits right side of dual or single cap tanks. Non-vented fits left side of bobbed tanks.

FL 1941-1972
EL 1936-1940

V-Twin Manufacturing Gas Cap w-o Vent - Sold Each

Stock non-vented gas cap is for the left hand side of bobbed gas tanks.

OEM: 61103-65

FL 1965-1972

V-Twin Manufacturing Gas Tank Mount Bumpers (Pair), 1973-84 FX - Set

Gas tank mount cup bumper is stock OE replacement type.
For use on one piece FX or Quick Bob tanks. Sold in a quanity of 2.
OEM: 61562-66

FX 1973-1984

V-Twin Manufacturing Gas Tank Mount Bushing, Pair, 1973-84 FX - Set

Gas tank mount rubber bushing is a stock OE replacement.
For use on one piece FX or Quick Bob tanks. Sold in a quanity of 2.
OEM: 61152-65P

FX 1973-1984

V-Twin Manufacturing Gas Tank Mount Kit, Chrome, 45 Solo and Servi Car - Kit

Chrome gas tank mount kit for side valve models

WL 1936-1952
G 1937-1963
UL 1937-1948

V-Twin Manufacturing Gas Tank Mount Kit, Parkerized, 45 Solo and Servi Car - Kit

Parkerized gas tank mount kit for side valve models

WL 1936-1952
G 1937-1963
UL 1937-1948

V-Twin Manufacturing Gas Tank Spring Clip, - Pack

Gas Tank Spring Clip

OEM: 61546-74

FX 1973-1984

V-Twin Manufacturing J.D.-VL Gas Cap 1916-34 Nickel - Sold Each

Nickel gas cap for side valve models

OEM: 3507-16

VL 1916-1934
J 1926-1929
VL 1930-1934
F 1916-1925

V-Twin Manufacturing James Gas Cap Gasket, 1941-82 - Pack
GAS TANK/OIL TANK GASKETS Fits: 1977-82 Gas Cap

V-Twin Manufacturing James Gas Cap Gasket, 1941-82 - Pack
GAS TANK/OIL TANK GASKETS Fits: 1941-82 Gas Cap Thin

V-Twin Manufacturing James Gas Cap Gasket, 1965-82 - Pack
GAS TANK/OIL TANK GASKETS Fits: 1965-82 Gas Cap Left

V-Twin Manufacturing James Gas Cap Gasket, 1983-up - Pack
GAS TANK/OIL TANK GASKETS Fits: 1983-up Gas Cap

V-Twin Manufacturing Mounting Kit With Spacers, Zinc, 1936-84 FLH - Kit

Kit includes special washers, studs, bolts, and spacers in zinc finish for bobbed tanks.

FL 1941-1984

V-Twin Manufacturing Mounting Kit, Cadmium, 1936-84 FLH - Kit

Cadmium mounting kit for FLH bobbed tank includes washers, studs and bolts.

FL 1941-1984
EL 1936-1940

V-Twin Manufacturing Mounting Kit, Chrome, 1936-84 FLH - Kit

Chrome mounting kit for FLH bobbed tanks includes washers, studs and bolts.

FL 1941-1984
EL 1936-1940

V-Twin Manufacturing Mounting Kit, Parkerized, 1936-84 FLH - Kit

Parkerized gas tank mounting kit includes washers, studs and bolts.

FL 1941-1984
EL 1936-1940

V-Twin Manufacturing Non-Vented Replica Chrome Cap, 1965-72 - Sold Each

Replica chrome gas cap is deep and non-vented. It has a taller profile for an authentic look.
It is advisable to order caps in sets, as they may not match the existing cap brand or style.
OEM: 61103-65

FL 1965-1972

V-Twin Manufacturing Rear Tank Mount Tabs, 1936-85 Big Twin frames - PR

Rear tank frame mount tabs.

FL 1941-1984
EL 1936-1947
U 1937-1948

V-Twin Manufacturing Replica Gas Cap Set Vented and Non-Vented, FL 1965-1972 - Set

Replica chrome gas cap set comes vented and non-vented. They have a taller profile for an authentic look.

FL 1965-1972

Measurements:

Thickness: 2.90mm

V-Twin Manufacturing Replica STOCK Tank DIVIDER, Black - Sold Each

Replica black tank divider replaces the rubber filler strip when a seat "T" bar is used. Stock OE replacement type.

OEM: 61122-39

EL 1939-1940
FL 1941-1984
UL 1939-1948

Measurements:

Length: 4-1/8"
Width: 7/8"

V-Twin Manufacturing Right And Left Bung Tank Insert - Set

Set contains right and left late bung type inserts. Must be welded in.
For use with 1983-up style gas caps.

All models

V-Twin Manufacturing Rubber Button Bumper, 1973-84 FX - Pack

Gas tank or kickstand bumper stop is used by bottom bumper on FX or Quick Bob tanks.
For use on one piece FX or Quick Bob tanks. Also for use for a kickstand bumper stop on 1993-up Big Twin and forged kickstand for 1986-2006 FXST, FLST.
OEM: 6212

V-Twin Manufacturing Shift Gate Clamp Nut 16-35 Chrome - Sold Each

Chrome nut is 2" hex and fastens the shifter gate to the tank.

OEM: 2210-16

VL 1916-1936
F 1916-1924
J 1925-1929

V-Twin Manufacturing Shift Mount Tab Kit, BT - Kit

Shifter mount tab kit for gas tank includes two brackets and tube for shifter and three tank mounts for use on Big Twin hand shifter tanks.
Tab kit must be welded on. Order bushing separately for shifter pivot bolt.

FL 1941-1965
UL 1938-19

V-Twin Manufacturing Stock Style Gas Cap Non-Vented, 1970-1982 FX-FXS-FL - Sold Each

Chrome non-vented gas cap is for the left hand side of bobbed gas tanks.
It is advisable to order caps in sets, as they may not match the existing cap brand or style.
OEM: 61103-73

FL 1973-1982
FXS 1979-1982
FX 1970-1982