All

V-Twin Manufacturing Big Twin Connecting Rod Roller Sets, .0002o-s, Steel Cage, 41-72 - Kit

Torrington bearing set is .0002 oversize with 18 long and 36 short rollers.
Roller bearing set supplies enough rollers for application only for use with steel cages.

FL 1941-1972
FX 1971-1972
UL 1941-1948

V-Twin Manufacturing Big Twin Connecting Rod Roller Sets, .0004o-s, Steel Cage, 41-72 - Kit

Torrington bearing set is .0004 oversize with 18 long and 36 short rollers.
Roller bearing set supplies enough rollers for application only for use with steel cages.

FL 1941-1972
FX 1971-1972
UL 1941-1948

V-Twin Manufacturing Big Twin Connecting Rod Roller Sets, .0008o-s, Steel Cage, 41-72 - Kit

Torrington bearing set is .0008 oversize with 18 long and 36 short rollers.
Roller bearing set supplies enough rollers for application only for use with steel cages.

FL 1941-1972
FX 1971-1972
UL 1941-1948

V-Twin Manufacturing Big Twin Connecting Rod Roller Sets, Standard, Steel Cage, 41-72 - Kit

Torrington bearing set is standard size with 18 long and 36 short rollers.
Roller bearing set supplies enough rollers for application only for use with steel cages.

FL 1941-1972
FX 1971-1972
UL 1941-1948

V-Twin Manufacturing Connecting Rod Assembly, 1941-1973 FL-FX - Kit

Includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.
Piston pin bushings are installed and honed for stock wirst pin.
OEM: 24281-41A

FL 1941-1973
FX 1971-1973

V-Twin Manufacturing Crank Pin Flywheel Washer .060, Steel 1941-69 BT OHV - Set

Flywheel crank pin thrust washers are .060 size and made of steel.
Sold as a pair.
OEM: 23973-41

FL 1941-1969

V-Twin Manufacturing Crank Pin Flywheel Washer, Inside, Bronze .060, 1941-69 Big Twin - Set

Flywheel crank pin thrust washers are .060 oversize and made of bronze.
Sold as a pair.

FL 1941-1969

V-Twin Manufacturing Crank Pin Flywheel Washer, Inside, Steel, Std (.055), 1941-69 BT OHV - Set

Flywheel crank pin washers are .055 size and made of steel.
Sold as a pair.
OEM: 23973-41

FL 1941-1969

V-Twin Manufacturing Crank Pin Flywheel Washer,Outside, Bronze .055 Std, 1941-69 Big Twin - Set

Flywheel crank pin thrust washers are .055 oversize and made of bronze.
Sold as a pair.
OEM: 23973-41A

FL 1941-1969

V-Twin Manufacturing Crank Pin Lock Plate, 1941-53 BT XL - Pack
Replacement Lock Tabs. Fits: Crank Pin 1941-53 BT, 1957-80 XL

V-Twin Manufacturing Crank Pin Lock-Nut Kit, 1954-E81 Big Twin - Kit

Kit includes 2 nuts, 2 locks, and mount screws.

OEM: 23966-78

FL 1954-1980
FX 1971-1981

V-Twin Manufacturing Crank Pin Nut Lock Plates, 1954-E80 BT - Pack
Replacement Lock Tabs. Fits: Crank Pin 1954-80 Big Twin

V-Twin Manufacturing Crank Pin Nut Set, Eastern, 1954-E81 61 & 80 - Set

Crank pin nut set.
Sold as a pair
OEM: 23966-54A

EL 1936-1952
UL 1937-1948

V-Twin Manufacturing Crank Pins, Eastern Super 2 Hole, BT OHO, 74+80, 41-E81 - Sold Each

Eastern Super crank pin is made of 8620 steel with .120 heat protection. Crank pin is 2-hole type.

OEM: 23961-41

FL 1941-1980
FX 1971-1980

V-Twin Manufacturing JIMS Crank Pin .025 Shorter w-180Deg Oil, 74+80 1941-E81 - Sold Each

Crank pin is heat treated 60-62RC to a case depth of .100. A special 180A, oiling design will better lubricate the bearing diameter. Threads are "J" type. Pin is .025 shorter taper to taper.

FL 1941-1980
FX 1971-1980

V-Twin Manufacturing Outside Flywheel Washer Set 11 Piece, 1936-up Big Twin, All - Set

Crank pin flywheel washer set contains two more washers than the original set, one thicker and one thinner than stock.
The 11-piece set contains one each of the following widths: .060, .066, .070, .074, .078, .082, .086, .090, .094, .098, and .102.

V-Twin Manufacturing Replica Stock Replacement Rod Sets, 61 Pan Knuckle, 36-52 - Set

Includes new rods, crank pin, nuts, cages and standard roller fitted and assembled. Rod set includes step-crank pin .
Piston pin bushings are installed and honed for stock wirst pin.
OEM: 24277-37

EL 1936-1952

V-Twin Manufacturing Replica Stock Replacement Rod Sets, 74 and 80 Shovel, 74-E81 - Set

Includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.
Piston pin bushings are installed and honed for stock wirst pin.
OEM: 24281-74A

FL 1974-1981
FX 1974-1981

V-Twin Manufacturing Replica Stock Replacement Rod Sets, 80 Shovel, 81-83 - Kit

Includes new rods, crank pin, nuts, cages and standard rollers fitted and assembled.
Piston pin bushings are installed and honed for stock wirst pin.
OEM: 24281-80

FL 1981-1983
FX 1981-1983

V-Twin Manufacturing S&S OHV Rods w/Steel Cage, 1941-81 74? & 80? OHV - Kit

Set is a heavy duty replacement and includes wrist pin bushings, rod races, matched rods, pins, rollers, cages, and nuts for stock or stroker models with 18 bearing steel cages.

FL 1941-1981
FX 1971-1981