Buckhorn Pullback and Buffalo

V-Twin Manufacturing 1982-up FXR Style Handlebar - Sold Each

Replica chrome 1" handlebar for stock replacement on FXR with a 2" knurled center spacing and indents for wiring.

OEM: 56081-82

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994

Handlebars,Cus High Buckhorn Pre-82 34-1/2"Wide 12-1/4"Rise 8-1/4"Pull Back 9"Ctr Width Cp

• Fits 1982/Later models including ly-By-Wire
• 1 1/2 diameter
• 5 pull back
• Drilled for internal wiring
• V-FACTOR
• High Buckhorn
• Chrome Plated
• Width: 34 ¹/₂
• Rise: 12 ¹/₂
• Pullback: 8 ¹/₄
• Center Width: 9
• Pre-1982
• (Imported)

DRAG SPECIALTIES Gloss Black 8" Buffalo Straight-Riser 1 1/4" T-Bars, center width 8.5", pullback sweep 5.875"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

Handlebar, Cruiser Style Most Models/Yrs 1-1/4"Od 36"W 4"Rise 10-3/4"Pb Chromed

• Give your bike the burly look with a set of these oversize handlebars
• The handlebars are 1 ¹/₄ O.D. in diameter and feature conventional 1 mounting and handlebar control area
• To keep the switch wires out of sight the bars have been dimpled (like the 1982/Later OE bars) and slotted under the switch housing area so the wires can be run internally
• The brake side has been clearanced to be used with OE style master cylinders (all years, including 1996/Later) and most custom brake master cylinders
• Knurled at the riser area to help prevent slippage
• Fits risers mounted on 3 ¹/₂ centers

• V-FACTOR
• Cruiser Style
• Chrome Plated
• Rise: 4
• Width: 36
• Center Width: 13 ³/₄
• Pullback: 10 ³/₄

V-Twin Manufacturing 1982-up FXST,XL Stock Handlebar - Sold Each

Replica chrome 1" handlebars for stock replacement with a 2" knurled center spacing and indents for external wiring.

OEM: 56081-82

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1994
FXD 1991-UP

V-Twin Manufacturing 9-1/2" Replica 1" Handlebar with Indents, 56962-07 - Sold Each
9-1/2" Replica Handlebar with Indents OEM No: 56962-07 Replica chrome 1" handlebar for stock replacement on FXST with a 2" knurled center spacing and indents for wiring. Fits Harley-Davidson models: FL 1982-1984 FX 198

DRAG SPECIALTIES Chrome Finned Handlebar Clamp With Skirt, Harley 74-16 FX 74-16 FL 74 - 16 XL

• Die-cast clamp has a skirt design to cover the underside of the clamp when using our pullback and FXWG-style risers
• Designed to work on 1" bars

DRAG SPECIALTIES Chrome 16" Buffalo Straight-Riser 1 1/4" T-Bars, center width 9", Natural, overall width 29", pullback sweep 5"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 14" Buffalo Straight-Riser 1 1/4" T-Bars, center width 9", overall width 29", pullback sweep 5"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 14" Buffalo Straight-Riser 1 1/4" T-Bars, center width 9", Natural, overall width 29", pullback sweep 5"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 12" Buffalo Straight-Riser 1 1/4" T-Bars, center width 9", overall width 29", pullback sweep 5"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 12" Buffalo Straight-Riser 1 1/4" T-Bars, center width 9", Natural, overall width 29", pullback sweep 5"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 17" Buffalo Ape Hanger 1 1/4" Touring Bars, Natural, Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Buffalo Beach Bar 1 1/4" Touring Bars, center width 9.5", Natural, end rise rise height 3", overall width 35.5", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 20" Buffalo Ape Hanger 1 1/4" Touring Bars, Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 16" Buffalo Ape Hanger 1 1/4" Touring Bars, overall width 39.5", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 12.5" Buffalo Ape Hanger 1 1/4" Touring Bars, overall width 36", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 18" Buffalo Ape Hanger 1 1/4" Touring Bars, Natural, overall width 40", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 14" Buffalo Ape Hanger 1 1/4" Touring Bars, Natural, overall width 39", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 16" Buffalo Ape Hanger 1 1/4" Touring Bars, Natural, overall width 39.5", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 10" Buffalo Straight-Riser 1 1/4" T-Bars

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 20" Buffalo Ape Hanger 1 1/4" Touring Bars, Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 18" Buffalo Ape Hanger 1 1/4" Touring Bars, overall width 40", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 14" Buffalo Ape Hanger 1 1/4" Touring Bars, overall width 39", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 10" Buffalo Ape Hanger 1 1/4" Touring Bars, Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 10" Buffalo Straight-Riser 1 1/4" T-Bars

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Chrome 8" Buffalo Straight-Riser 1 1/4" T-Bars, center width 8.5", Natural, pullback sweep 5.875"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Buffalo 1-1/4" Springer Beach Bars, Natural, end rise rise height 3", overall width 39.5"

• The ultimate 1-1/4" diameter handlebar, designed for maximum comfort
• 1" diameter in clamping area
• Springer-style bars have 4-3/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Made in the U.S.A.
• Not for use with electronic throttle control or heated grips
  

V-Twin Manufacturing 1988-up Riser Stud Conversion for FXSTS studs 1-2 ID Thread - Set

Riser stud set has a 1/2" X 13 thread inner diameter.

FXSTS 1988-2006

Measurements:

Depth of Hole: 1.033"
Overall Length: 2.033"
Nut Length: 1.011"

V-Twin Manufacturing 1982-up Chrome FXSTS Stock Handle Bar - Sold Each

Replica chrome 1" handlebar for stock replacement with a 3-1/4" riser knurled center spacing and indents for external wiring.

OEM: 56093-88

FX 1974-1981
FL 1974-1981
XL 1974-1981

V-Twin Manufacturing 1982-up 883 XL Stock Style Handlebar - Sold Each

Replica chrome 1" handlebar for stock replacement on 883 XL with a 2" knurled center spacing and indents for wiring.

OEM: 56082-83

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1994
FXD 1991-UP

V-Twin Manufacturing Chrome Speeder Handlebar with Indents - Sold Each

1" chrome handlebar with indents for external wiring and a knurled center.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

V-Twin Manufacturing Police Style Handlebar with Indents - Sold Each

1" chrome handlebar with knurls and indents for external wiring.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007

V-Twin Manufacturing 32" Cruise Handlebar with Indents - Sold Each

1" chrome cruise handlebar with indents for external wiring and a knurled center.

FL 1982-1984
FX 1982-1984
XL 1982-UP
FLST 1986-UP
FXST 1984-UP
FXR 1982-1984
FXR 1985-1994
FXD 1991-UP
FLT 1982-1984
FLT 1985-2007