15 products
15 products
COMETIC Head Gasket, bore size 79mm, thickness .045", Suzuki 80-81
DS-09343871
Regular price $108.95In Stock
/
Shipping calculated at checkout.
COMETIC Head Gasket, bore size 79mm, made in the usa, specific application, thickness .045"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Head Gasket, bore size 70mm, thickness .018", Suzuki 06-14 GSX-R750
DS-09343858
Regular price $123.95In Stock
/
Shipping calculated at checkout.
COMETIC Head Gasket, bore size 70mm, made in the usa, specific application, thickness .018"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Head Gasket, bore size 70mm, thickness .027", Suzuki 06-14 GSX-R750
DS-09343857
Regular price $108.95In Stock
/
Shipping calculated at checkout.
COMETIC Head Gasket, bore size 70mm, made in the usa, specific application, thickness .027"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Head Gasket, bore size 73mm, thickness .030", Suzuki 00-05
DS-09343798
Regular price $103.95In Stock
/
Shipping calculated at checkout.
COMETIC HEAD GASKET, bore size 73mm, made in the usa, specific application, thickness .030"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Head Gasket, bore size 84mm, Steel/Viton, thickness .030", Suzuki 99-14
DS-09343793
Regular price $103.95In Stock
/
Shipping calculated at checkout.
COMETIC HEAD GASKET, bore size 84mm, made in the usa, specific application, thickness .030"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Cometic High-Performance Head Gasket, bore size 81mm, Steel, thickness .030", Suzuki 99-14
DS-09343790
Regular price $103.95In Stock
/
Shipping calculated at checkout.
COMETIC Cometic High-Performance Head Gasket, bore size 81mm, made in the usa, Steel, specific application, thickness .030"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Cometic High-Performance Head Gasket, bore size 81mm, Steel, thickness .018", Suzuki 99-09
DS-09343765
Regular price $129.95In Stock
/
Shipping calculated at checkout.
COMETIC Cometic High-Performance Head Gasket, bore size 81mm, made in the usa, Steel, specific application, thickness .018"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Cometic High-Performance Head Gasket, bore size 76mm, Steel, thickness .030", Suzuki 01-08
DS-09343756
Regular price $108.95In Stock
/
Shipping calculated at checkout.
COMETIC Cometic High-Performance Head Gasket, bore size 76mm, made in the usa, Steel, specific application, thickness .030"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Cometic High-Performance Head Gasket, bore size 83mm, Steel, thickness .030", Suzuki 99-09
DS-09343754
Regular price $114.95In Stock
/
Shipping calculated at checkout.
COMETIC Cometic High-Performance Head Gasket, bore size 83mm, made in the usa, Steel, specific application, thickness .030"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Head Gasket, bore size 75mm, thickness .018", Suzuki 00-05
DS-09343579
Regular price $123.95In Stock
/
Shipping calculated at checkout.
COMETIC Head Gasket, bore size 75mm, made in the usa, specific application, thickness .018"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Head Gasket, bore size 75mm, thickness .030", Suzuki 00-05
DS-09343578
Regular price $108.95In Stock
/
Shipping calculated at checkout.
COMETIC Head Gasket, bore size 75mm, made in the usa, specific application, thickness .030"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Head Gasket, bore size 60.5mm, 60mm, CFM-20, thickness .043", Suzuki 88-06
DS-09343498
Regular price $64.95In Stock
/
Shipping calculated at checkout.
COMETIC Head Gasket, bore size 60.5mm, 60mm, made in the usa, CFM-20, specific application, thickness .043"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC 81mm Head Gasket, 1299cc, EST, Each, thickness .018", Suzuki 99-09
DS-09340508
Regular price $115.95In Stock
/
Shipping calculated at checkout.
COMETIC 81mm Head Gasket, 1299cc, made in the usa, EST, Each, thickness .018"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC GASKET HEAD GSXR 73MM, EST, Each, thickness .018", Head Gasket, Suzuki 00-05
DS-09340507
Regular price $115.95In Stock
/
Shipping calculated at checkout.
COMETIC GASKET HEAD GSXR 73MM, made in the usa, EST, Each, thickness .018", Head Gasket
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
