Drag Specialties

EMGO Lucas 6V Universal Ignition Coil, Single output, Each, External Ignition Coil

• Single and dual spark plug leads using solid core wire
• PART #2102-0029 uses mounting bracket for ground; mounting holes are 5.5mm X 32mm center to center
• PART #2102-0030 has fully insulated mount
• Check wiring diagram before installing

SBS Dual Carbon Brake Pads, pads per package 2
SBS Dual Carbon Brake Pads, pads per package 2, 864DC

EMGO AIR FILTER 13780-38A00, Paper, specific application

• Meet or exceed OEM-quality standards
• Built with the highest-quality paper, rubber and metal

EMGO AIR FILTER 13780-38A50, Paper, specific application

• Meet or exceed OEM-quality standards
• Built with the highest-quality paper, rubber and metal

EBC Mikuni-Style Pilot-Slow Jets 60, Natural, Brass, Mikuni, 4-Pack, Pilot Jet

• Brass carburetor jets are high-precision and flow-calibrated for extremely accurate fuel flow rate
• Available in a range of sizes
• High-quality replacements; NOT original Mikuni jets
• Sold to dealers in 4-packs; sold to consumers as each
• Fit all VM, TM and TMS/TMX carburetors
• 13.5mm long
• Sold to dealer in 4-pack; sold to consumer as each
• Fit all RS, HS and HSR carburetors
• 28.1mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit late-model OEM BS CV carburetors
• 14mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit Kawasaki, Suzuki and Yamaha OEM BS CV carburetors
• 14mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit early-style TMS/TMX, TMX36, TMX38 and BSR CV carburetors
• 27.8mm long
• Sold to dealer as 4-pack; sold to consumer as each

MIKUNI RD VM22/210 PILOT JETS

A-BAX PILOT JETS FOR MIKUNI VM28/486

MIKUNI RD N151.067 PILOT JETS (NON-BLEED TYPE)

MIKUNI RD BS30/96 PILOT JETS (BLEED TYPE)

MIKUNI RD N224.103 PILOT JETS

EMGO Oil Filter, Paper, specific application, Replacement
EMGO Oil Filter, Paper, specific application, Replacement, Ural 80-15

EMGO Chrome Mirror Adapter With 10mm Male Thread and 8mm Female Thread, Each, specific application

• Reduce or increase thread size to allow mounting on 8mm or 10mm applications
• Convert left-hand threaded applications to right-hand threaded mirrors
• Mirror risers raise mirror approximately 1"
• Available with black or chrome finish
• Sold each

BARON 1 1/4" Chrome Kong Handlebar, center width 10", drilled, end rise rise height 16", made in the usa, Steel, overall width 38", specific application

• Old-school biker cool meets new-school comfort
• Ape hanger style reengineered to provide comfort while still projecting attitude
• Rider's arms are allowed to hang and drape effortlessly, taking pressure off the neck and back
• Improves steering control while reducing effort, making bike easier to control
• Massive 11/4" tubing truly makes you a standout in the crowd
• Drilled and dimpled for control housings and internal wiring
• Accepts stock hand controls
• Fits most bikes with 31/2" to 5" on-center knurling and 1" diameter bar mounts
• Works with 1" diameter risers
• Will require custom-length lines and cables
• Available in chrome or glossy black powder coat finishes
• Junior Kong measures 11/4" diameter w/ 14" rise x 37" width x 12" pullback, center width: 10"
• Kong measures 11/4" diameter w/ 16" rise x 38" width x 81/2" pullback, center width: 10"
• King Kong measures 11/4" diameter w/ 18" rise x 37" width x 12" pullback, center width: 10"
• Made in the U.S.A.

Z1R Electric Shield Clear, Phantom
Z1R Electric Shield Clear, Phantom

PC RACING Helmet Mohawk Yellow, Peel 'n' stick, hook-and-loop attachment

• Every rider can add some attitude
• Simply separate Peel 'n Stick hook tape from Mohawk or Blade, peel off backing, align on helmet in desired location and press firmly
• Attach Mohawk; hook-and-loop will hold to over 200 mph, however, it should be checked occasionally
• Different color or style can be put on in seconds

PC RACING Helmet Mohawk Blue, Peel 'n' stick, hook-and-loop attachment

• Every rider can add some attitude
• Simply separate Peel 'n Stick hook tape from Mohawk or Blade, peel off backing, align on helmet in desired location and press firmly
• Attach Mohawk; hook-and-loop will hold to over 200 mph, however, it should be checked occasionally
• Different color or style can be put on in seconds

SHOW CHROME Protective Cover For Microphone Windsock

• Universal, replacement foam windsocks
• Protective vinyl cover available separately
• Sold each

ATV-TEK Black Pro Series Rider Bandana Dust Mask, Half Face Mask With Neck Shield, breathable

• Filter blocks up to 99.9% of dust particulates
• Two one-way Tek exhaust valves regulate heat, CO, and water vapor
• Breathable, moisture wicking mask
• Washable, reusable
• Available in black, red, or pink

ALPINESTARS Winter Touring Balaclava, Full Face Mask With Neck Shield, breathable, Black, Fabric, waterproof, windproof

• Warm, breathable moisture-wicking stretch fabric construction for comfort
• Full-face design with neck and shoulder covering for effective insulation against the elements
• External waterproof and windproof neck skirt
• Flat-lock seams for comfort when worn under a helmet
• Open nose panel construction to aid breathing
• One size fits most

ZAN HEADGEAR Black Flydanna Headwrap, Tie-On

• Made of 100% cotton fabric
• Fashioned into a six-paneled skull cap
• Tail on the back to slide easily onto head
• Ties at the base of the neck
• Keeps rider cooler in the summer and warmer in the winter
• One size fits most

ZAN HEADGEAR Purple Paisley Motley Tube, breathable, Pullover, waterproof, windproof, Neck Tube

• Comfortable in all types of weather
• 100% polyester construction is wind-resistant, breathable and wicks away moisture
• Lightweight, machine washable and dries in minutes
• Wearable as a bandanna, scarf, beanie, balaclava, headband, wristband, helmet-liner, muffler, dust screen and more
• One size fits most adults

ZAN HEADGEAR Black Motley Tube, breathable, Pullover, waterproof, windproof, Neck Tube

• Comfortable in all types of weather
• 100% polyester construction is wind-resistant, breathable and wicks away moisture
• Lightweight, machine washable and dries in minutes
• Wearable as a bandanna, scarf, beanie, balaclava, headband, wristband, helmet-liner, muffler, dust screen and more
• One size fits most adults

ICON Men's Stryker Stealth Waist Strap Vest Replacement Part

• Replacement straps for Icon Stryker Vest
• Highly adjustable
• Low-profile design fits under most jackets
• Not for 2XL/3XL vests

CHRIS PRODUCTS Smoke Turn Signal Lens, Front, Rear, DOT, diameter 3 1/4", Each, Round, specific application, Harley 84-16 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

KHROME WERKS Stainless Steel Muffler Clamps, Natural, Raw, made in the usa, Pair, 1-3/4" i.d.

• Feature a 1.25" wide stainless band with an exclusive reaction block for 360 clamping without muffler or header distortion
• High-strength fastener hardware with corrosion-resistant coating included
• Replace 1" W OEM muffler clamps; fit mufflers with 1.75" i.d. inlets
• Sold in pairs
• Made in the U.S.A.

BASSANI XHAUST O2 Port Bushing Adapters, made in the usa, Pair

• Threaded outer and inner adapters reduce O sensor port from 18mm to 12mm allowing riders to use our exhaust pipes on select, newer-model motorcycles
• Sold in pairs
• Made in the U.S.A.

EASTERN MOTORCYCLE PARTS Starter Shaft Lock Washers, Harley 89-90 FX 89-90 FL 89 - 90 XL

• Sold in 10-packs
• Made in the U.S.A.

CYCLE VISIONS Chrome Rear Turn Signal Cover Plates, made in the usa, Steel, Pair, specific application, Harley 06-16 FX

• Covers the hole in the rear fender strut cover when removing the rear turn signals
• Made of steel and chrome plated

COVINGTONS Black Front Axle Spacers, Harley 08-15 FL

• CNC-machined billet aluminum construction
• Sold as a set
• Made in the U.S.A.

PAUL YAFFE BAGGER NATION Black 10" Classic Bagger Apes 1" Handlebars, Gloss, Powder-Coated, Harley 86-16 FL

• Paul Yaffe says, "Give instant attitude to your Bagger with a fresh new set of ape hangers!"
• Mandrel-bent from 1" seamless steel tubing and then treated to a chrome bath or gloss black powder coat
• Notched for electronic throttle
• Knurled, dimpled and pre-drilled for internal wiring
• Available in 10", 12", 14" and 16" heights
• Made in the U.S.A.

FUEL-TOOL Fuel Line Rebuild Kit, Harley 01-15 FX 97-15 FL 07 - 15 XL 02 - 15 VR

• Allows the rebuild of the male end of an 01-16 Delphi EFI fuel line
• Kit includes DuPont Viton O-ring, a solid brass valve and stainless spring
• Replacement Viton O-rings also available individually and in a 5-pack
• Made in the U.S.A.

S&S CYCLE Pre-Filter / Rain Sock For 1" Taller Stealth Air Filter
S&S CYCLE Pre-Filter / Rain Sock For 1" Taller Stealth Air Filter

BELT DRIVES LTD. Standard Offset Spacer Insert

• Used to offset motor pulley for belt alignment
• Spacer inserts are available in eight widths from 1/4" to 2" and include a motor sprocket nut and mounting screws
• Pulleys are for 3" systems and accept any of the spacer inserts listed
• Pulleys and spacer inserts sold separately
• Made in the U.S.A.

KLOCK WERKS Curvaceous Smooth Upper Filler Panels, Harley 06-08 FL

• Accent the line of your fender and hide clutter for a custom look
• Steel construction with E-coating, ready to color match paint
• Upper fillers mate up to the stock fender/lower filler on Street Glides
• Requires removal of stock license plate mount bar
• Two versions - smooth for models with or without detachable backrests; slotted for models with detachable TourPak
• Must remove stock license plate mount bar
• Made in the U.S.A.

MOTOR TRIKE Trailer Hitch Wire Harness, Plug-and-Play, Harley 14-15 FL

• Essential for connecting wiring to a trailer of any kind
• Wiring is plug-and-play - no splicing
• Maintains the integrity of original bike/trike harness
• Six-pin connector allows for auxiliary power to be run to trailer
• Made in the U.S.A.

LEGENDS AERO Softail Air Suspension, Harley 00-15 FX 00-15 FL

• All new Legend AERO Suspensions Systems sets the high mark in ultimate ride quality
• New redesigned exclusive Aramid Fiber air spring technology provides spring rate adjustability
• Air springs maximize wheel travel and adjust to any desired ride height
• Hard anodized machined aluminum bodies
• Legend's low-friction seals eliminate stiction
• High flow-piston reacts quickly for improved fluid flow management
• Deflective disc valved damping self adjust to frequency and ensures controlled performance
• Air compressor included, pre-wired, and model specific mounting
• New NAMZ/Legend complete wire harness installed with three easy Deutsch connections
• System includes OEM-looking black handlebar-mounted control for easy "on-the-go" adjustability
• Optional chrome handlebar mounted control sold separately (PART #0616-0207)
• Made in the U.S.A.