Drag Specialties

GOODRIDGE Chrome-3 UNION, Steel, Union Coupler

• Chrome-plated steel or black zinc-plated steel banjo adapters and bolts to use with Goodridge universal brake lines
• Adapters enable the removal of hoses without breaking banjo seals; fit bolt sizes 3/8" or 10mm
• Single and double bolt sizes
• Union coupler available for clutch lines

WSM Clear Filter for 3/16" to 1/4" Fuel Line, Fuel Filter

• A greatly improved filter with a larger fuel flow
• 31/8" long for 3/16"-1/4" fuel line

MOTORSPORT PRODUCTS GP3 Rear Spool Adapater Kit 3 in 1 V-shaped Use w/attached Spools, Adapter Kit

• GP3 adapter kits fit the GP3 Rear Sport Bike Stand and GP3-In-1 Lift Stand
• Converts lower frame half of the GP3-In-1 Lift into a rear swingarm lift; simply remove the upper half of the stand and install either adapter kit, transforming it into a rear sport bike stand
• PART #4101-0352 includes adjustable width V-shaped adapters to lift rear of bike with attached spools
• PART #4101-0353 includes adjustable width rubber-coated paddle adapters that protect the swingarm when lifting from underneath
• Both kits sold in pairs

LANG TOOLS Metric Thread Restorer File, Each, size .75mm, 1.25mm, 1.5mm, 1.75mm, 1mm, 2.5mm, 2mm, 3mm

• Set includes 3 thread files: Thread Restorer File 8 pitches 11-24 T.P.I (threads per inch) PART # 381-75, Thread Restorer File 8 pitches 9-32 T.P.I. (threads per inch) PART # 381-76, Metric Thread Restorer File 8 pitches (millimeters per thread) .75mm, 1.mm, 1.25mm, 1.5mm, 1.75mm, 2.mm, 2.5mm, 3.mm PART # 381-77
• Packaged in vinyl storage pouch
• Individual files sold separately
• Made in the U.S.A.

MOOSE RACING Universal Shock Preload Tool

• Adjust preload rings and collars for sizes 35mm-75mm
• Compact handle allows it to fit in trail tool bags

RACE TECH Shock Spring Compressor, made in the usa

• Allow easy installation and removal of shock springs without touching the spring collar
• Version 1 is for use on springs with rates of 8 kg/mm or less; features safety shaft locking device
• Version 2 uses a 19mm wrench (not included) to remove shock spring and includes four adapters for different size spring collars (60mm, 66mm, 72mm, 75mm); also includes eyelet and clevis adapter

EBC Clutch Tool, specific application

• Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance
• Highly compressed construction avoids swell and clutch drag
• Ideal for general-purpose street/sport/touring bikes
• Kit includes complete engine set of friction plates only

CKF CLUTCH KITS

• Kits have carbon-fiber impregnated friction plates
• Tough clutch plates extend engine life, improve drive, increase the heat threshold of the clutch and improve rider feel
• Available for select applications, see chart

DRC SERIES CLUTCH KITS

• Built with swaged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging"
• Complete engine set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height
• Not for use with 100% synthetic oil
• Allow modulation, unlike paper clutches which tend to snatch
• Anti-swell, alloy impregnated heavy-duty cork-based facings for smooth clutch take-up

DRCF SERIES CLUTCH KITS

• Ideal for use in 4-stroke, high-torque engine applications; great upgrade for 2-stroke performance applications
• Feature carbon-fiber lined clutch friction plates, a full set of steel plates and heavy-duty clutch springs
• Heavy-duty clutch kit designed for hard use and race applications

CSK CLUTCH SPRING SETS

• Sold in engine sets
• EBC springs are 10% stiffer than stock
• It is recommended you replace springs when changing clutch plates

CLUTCH REMOVAL TOOL

• Aids in unlocking clutch retainer bolts
• Speeds clutch removal

EBC Clutch Tool, specific application

• Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance
• Highly compressed construction avoids swell and clutch drag
• Ideal for general-purpose street/sport/touring bikes
• Kit includes complete engine set of friction plates only

CKF CLUTCH KITS

• Available for select applications, see chart
• Kits have carbon-fiber impregnated friction plates
• Tough clutch plates extend engine life, improve drive, increase the heat threshold of the clutch and improve rider feel

DRC SERIES CLUTCH KITS

• Complete engine set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height
• Anti-swell, alloy-impregnated heavy-duty cork-based facings for smooth clutch take-up
• Built with swagged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging"
• Allow modulation, unlike paper clutches that tend to snatch

DRCF SERIES CLUTCH KITS

• Feature carbon-fiber lined clutch friction plates, a full set of steel plates and heavy-duty clutch springs
• Heavy-duty clutch kit designed for hard use and race applications
• Ideal for use in 4-stroke, high-torque engine applications; great upgrade for 2-stroke performance applications

CSK CLUTCH SPRING SETS

• EBC springs are 10% stiffer than stock
• Sold in engine sets
• It is recommended you replace springs when changing clutch plates

CLUTCH REMOVAL TOOL

• Aids in unlocking clutch retainer bolts
• Speeds clutch removal

KIBBLEWHITE Valve Guide Ball Hone 5.5mm, made in the usa, Each

• Durable enough to size C630 bronze and cast iron valve guide materials
• Available from 4mm up to 3/8" widths
• Sold each
• Made in the U.S.A.

MOTUL 300V Synthetic 5W30 Motor Oil - 1 Liter, Each

• Ester technology's two types of esters provide excellent lubricity, better engine response and maximum engine rpm
• For use in all high performance 4-stroke engines
• % shear loss on Bosch ASTM D6278 test
• Passes JASO T94 wet clutch compatibility test
• Liter bottles, 12 per case; 4-liter bottles, 4 per case; sold each

EMGO Travel Trunk, Black, lockable, Plastic, Tail Bag

• Constructed of durable black ABS plastic
• Designed to mount on most luggage racks
• Includes mounting hardware, lock and two keys
• Measures 12" L x 161/2" W x 11" D

SADDLEMEN S4 Universal Saddlebag Support Brackets, Silver, Chrome, Solid, Steel, Pair

• Designed to attach/detach all Saddlemen saddlebags and any rigid-back aftermarket and OEM saddlebags with a twist of the QTL (Quarter Turn Locking) fasteners
• Complete kit includes docking posts and fasteners, turn signal relocator and support bracket
• For specific applications, components are also sold individually; see descriptions below
• Docking posts and fasteners replace fender strut bolts and allow you to put on or take off saddlebags with a quick twist of the QTL (Quarter Turn Locking) fasteners; includes four docking posts with fasteners, spacers, saddlebag grommets, support clips, nuts/bolts/fasteners needed and instructions
• Docking post kit should be used in conjunction with Saddlemen saddlebag support bracket; can be used to mount OEM H-D and H-D accessory saddlebags (except 12S bags) without purchase of additional bracket
• Support bracket kit includes two chrome-plated steel saddlebag supports and comes with an assortment of 5/16" and 3/8" fasteners in lengths to fit the most popular H-D models and aftermarket accessories
• Two types of turn signal relocation kits available: universal kit moves rear turn signals to the license plate mount and specific-fit kits relocate stock turn signals further back by extending the chrome fender rail

K&S TECHNOLOGIES DOT Approved Rear Turn Signal With Amber Lens, Incandescent, specific application, OEM Replacement DOT Approved

• DOT compliant turn signals are exact replacements of complete OEM assemblies, at a fraction of the cost
• Turn signals meet or exceed all government requirements for light output and durability and are legal for all street or dual-purpose motorcycles
• Bubble packed for display
• Turn signals are sold with amber lens assembly or clear lens with an amber bulb
• Amber bulbs must be used with clear lenses
• All part numbers with (C) are also available in a clear lens assembly; add C to end of PART # when ordering
• See the following pages for fitment and pricing information

NOTE: K S marker lights also available.

BOLT Hex Head Flange Fuji Style Metal Locking Nuts, made in the usa, Replacement, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Hex Head Flange Fuji Style Metal Locking Nuts, made in the usa, Replacement, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Hex Head Flange Fuji Style Metal Locking Nuts, made in the usa, Replacement, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Low-Profile Dimpled 10mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Low-Profile Dimpled 10mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT Low-Profile Dimpled 10mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

BOLT 8mm Hex Head Flange Bolts, made in the usa, 10-Pack

• Individual 10-packs of the nylon washers your shop needs

WSM Stainless Steel Mini Clamp, Natural, made in the usa, Each, size 1/2" - 1 1/2"

• Stainless steel mini clamps for many applications
• Sold each

SHOW CHROME Flush Reusable Rivets, Black, made in the usa, Plastic, 10-Pack, size 6mm

• Reusable plastic rivets for Gold Wing fairings
• Available in standard, low-profile or flush
• Sold in 10-pack

YUASA 6 x 12mm Bolt/Nut Set, made in the usa, 5-pack, Replacement, Terminal Adapter Hardware

• Bolts and nuts sold in packs of five sets of two each
• Vent tube is 750mm long; fits all Yuasa batteries; sold in packs of five

K&S TECHNOLOGIES F.E.W. Ignition Points Set, specific application
K&S TECHNOLOGIES F.E.W. Ignition Points Set, specific application, Honda 72-77, Suzuki 77-79

MOOSE RACING Spark Plug Caddy, Pair, Spark Plug Carrier

• Impact-resistant plastic design fits snugly around spare spark plug
• Perfect for fanny pack or fender bag
• Keep plugs clean and gapped
• Sold in pairs

EMGO Lil Cruiser Mirror, Natural, Chrome, glass height 3", Oval, glass width 5", Aluminum, Each, stem size 4 1/2", Short

• Great-looking, short-stemmed, chrome-plated mirrors designed with cruisers in mind
• Available with standard or reverse 10mm thread
• Standard 10mm thread fits either side of most bikes, except Yamaha; reverse 10mm thread fits Yamaha right side
• Sold each

ZERO GRAVITY Dark Smoke SR Series Windscreen, made in the usa, specific application, Replacement

• All Zero Gravity windscreens offer superior optical quality, strength plus flexibility, exceptional fit and finish, plus race-proven performance
• SR SERIES
• Zero Gravity's stock replacement line of sportbike windscreens
• Shaped like the original OEM screens that come stock from the factory
• Pre-drilled and designed to fit OEM fairing with precision using your stock mounting fasteners
• DOUBLE BUBBLE
• Developed by Zero Gravity R D in 1995 for Team ZG's race bikes, the Double Bubble is now seen on race tracks around the world
• Formed with a wedge-shaped bubble in the center of the windscreen, the Double Bubble was originally designed to provide superior aerodynamics for a rider tucked in behind the windscreen
• Adds a sleek, aerodynamic look to the exciting designs of today's new sportbikes
• SPORT TOURING
• Designed to reduce the windblast on the sport touring rider and provide more comfort while in the upright riding position
• Raise the point at which the wind hits the rider by several inches to significantly reduce the windblast
• Buffeting and other aerodynamic considerations will vary according to the riders' physical dimensions
• Made to the highest Zero Gravity standards, each Sport Touring screen is designed to enhance the look of the bike as well as provide better rider comfort
• Made in the U.S.A.

K&S TECHNOLOGIES Turn Signal Wire Adapter, Pair, specific application, Replacement, Turn Signal Adapter

• Eliminate the need to cut and splice wiring when using aftermarket turn signals or marker lights
• Plug into the OEM turn signal plug and then use pin connectors used on aftermarket lights
• Sold in pairs

K&S TECHNOLOGIES FLASHER RELAY 12V 2PIN

• PART #2020-0063 12V electronic-type 2-pole flasher relay with a maximum of 20A
• PART #2020-0064 12V electronic-type 3-pole flasher relay with a maximum of 20A