Drag Specialties

ARLEN NESS Replacement Rubbers For PART #'s 1621-0257/0260, Deep Cut, Driver, Floorboard

• Machined from two pieces of billet aluminum to create a cutting-edge see-through design
• Adds exceptional style and comfort to your bike
• Available in chrome or black anodized finish; black anodized features machined accents on the top, bottom and side of the floorboard
• Includes all mounting hardware
• Matching passenger boards available (sold separately)
• Driver floorboards: 16" L x 6" W x .75" thick; Passenger floorboards: 7" L x 4" W x 1" thick

GMA ENGINEERING BY BDL Rebuild Kit For GMA Forward Controls

• CNC-machined from billet aluminum
• Unique design and features make these controls a must-have upgrade for your stock or custom motorcycle
• Has a 5/8" bore master cylinder
• Made in the U.S.A.

GMA ENGINEERING BY BDL Front Brake Master Cylinder Rebuild Kit, For GMA Master Cylinders., bore size 5/8", made in the usa, Each

• Clean design makes these assemblies a great choice for custom applications
• CNC-machined
• Assemblies fit most 1" diameter handlebars (except dimpled bars)
• Include mounting clamps and levers
• Hydraulic and cable clutch assemblies available
• Available with or without switch kit
• Switch kit includes three momentary switches with chrome or gloss black buttons and switch housing
• Switches can be wired internally or externally
• Sold each
• Made in the U.S.A.

PAUL YAFFE BAGGER NATION Gloss Black Stealth III License Plate Frame, Harley 09-19 FL

• Clean up the look of your CVO and does away with the light box
• Direct bolt-on installation
• Hidden LEDs in the frame illuminate the license plate
• True plug-and-play wiring installation
• Include all necessary mounting hardware
• Made in the U.S.A.

VANCE & HINES Quiet Baffle, Big Shot Duals, Big Shots Long, Big Shots Staggered, Shortshots Staggered, Sideshots, Softail Duals, Straightshots, Throwbacks, Steel, Sold Each, Round, specific application

• Feature the revolutionary Power Chamber design; a unique cross-over system that increases horsepower and torque
• Armed with full-coverage 21/2" heat shields that are essentially blue-proof for long-lasting style
• Like all Vance & Hines systems, these feature a superior fit and an unrivaled finish in either chrome or race-quality matte black ceramic coat
• Flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-16 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
• Meticulously finished billet end caps
• Removable baffles and all mounting hardware included
• Made in the U.S.A.

BELT DRIVES LTD. Replacement Starter Housing For Top Fuel Belt Drive, Each

• For use on BDL Belt Drive clutches

IRC NR-53 2.50-18 Front/Rear Tire, Bias, 40L, B-W, Moped

• High-quality moped and small cc motorcycle tires
• Front or rear application, unless noted
• Blackwall
• Tube type (TT)
• L-rated for speeds up to 74 mph, P-rated for speeds up to 93 mph or S-rated for speeds up to 112 mph

NO-MAR Replacement Mount Tip, CH200, Each, Tire Changer

• Oversized heat-treated and case-hardened frame arms for maximum durability
• Sliding and rotating upper arm allows for perfect indexing on any 7-21" wheel
• Kit includes Posi-Clamps, mount/demount bar, one spare demount tip, tire lube, spray bottle, tool collar with spoon bar attachment, two 16" spoon bars and scratch-proof bead breaker
• Yellow Thing's rubberized coating and special design prevents the tire bead from creeping when mounting the top bead
• The XtraHand is a hands-free clamp that holds the tire bead below the rim flange for fast, scratch-free tire mounting
• Portable Roll-On Base, PART #0365-0078, available separately
• SpoonBars with built-in rim protectors were designed to install tires with ease and protection
• Tire mounting pastes also available, see page ???

ZAN HEADGEAR Black Paisley Motley Tube, breathable, Pullover, waterproof, windproof, Neck Tube

• Comfortable in all types of weather
• 100% polyester construction is wind-resistant, breathable and wicks away moisture
• Lightweight, machine washable and dries in minutes
• Wearable as a bandanna, scarf, beanie, balaclava, headband, wristband, helmet-liner, muffler, dust screen and more
• One size fits most adults

GOODRIDGE Polished Stainless Steel Universal Brake Line Fitting, Inverted Flare, Straight, fitting. -3 AN x 3/8"- 24, made in the USA

MIKUNI HSR42 Jet Kit

• HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each); -96, -97 and -98 needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box
• HSR45 kit includes 165 through 185 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98 needles (1 each); 2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers
• HSR48 kit includes 180 through 210 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98 needles (1 each); 2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers
• Some kit components are available separately
• Made in Japan

SPYKE Grind-Free Starter Jackshaft For BDL 3" Belt Drive, made in the usa, Each, pinion teeth 9, specific application

• The amazing jackshaft fixes the grind associated with BDL 3" open belt drive systems that utilize a one-piece starter jackshaft
• The jackshaft is a three-piece design with ramped teeth and enough flex to integrate seamlessly with the belt drive ring gear
• Made in the U.S.A.

S&S CYCLE Super G Shorty Carburetor

• Each carb kit includes an S&S Super E or Super G gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold (unless noted), mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main jets, VOES tubing (when applicable), installation and jetting instructions
• Super E has a 1.875" throat at the butterfly and a 1.5625" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch
• Super G has a 2.0625" throat at the butterfly and a 1.75" venturi and is recommended for use on 90-cubic-inch and larger high-performance and modified engines
• 2.0625" G is not recommended for smaller, lower compression engines
• If there is a doubt as to which carburetor to use, we suggest the 1.875" Super E
• Individual carburetors also available
• Made in the U.S.A.

AMS Street Fox 23/10R14 Front/Rear Tire, Sport, Utility, DOT, Radial, B-W, Tubeless

• Long-lasting street-oriented tread design built for the Kawasaki Mule that is used at the municipalities, school districts, warehouses, etc.
• Protective rim guard to save your rim when rubbing up against a curb
• Radial casing provides a smooth ride
• DOT for limited road use

KENDA K329 2.75-10 Front/Rear Tire, Bias, B-W, Scooter

• Good balance between mileage and wet traction
• Four-ply rated
• Blackwall
• Tubeless (TL)

DURO HF903 130/60-13 Front/Rear Tire, Bias, 55J, B-W, Scooter, Tubeless

• Attractive tread design
• Sizes available for most popular scooter models
• Fit both front and rear
• Blackwall
• Tubeless (TL)
• J-rated for speeds up to 62 mph

K&L SUPPLY Short Straight Valve Stem, Silver, 8mm

• Includes metal, rubber and aluminum tire valve stems along with most popular styles of caps and cores
• Replacement parts sold separately

ZAN HEADGEAR Black and White Vintage Flag Full Face Mask, breathable, windproof

• Made from 100% neoprene
• Include permanent mouth and eye vents
• Eye opening large enough to accommodate goggles or sunglasses
• Hook-and-loop closure for custom fit
• Patterned masks reverse to solid black
• Oversize masks are made to fit larger heads; small masks are perfect for smaller heads
• Available in full-face and half-mask styles

NAMZ OEM-Type Mini MCL Connector, Throttle-By-Wire, Green, specific application, Harley 08-16 FL

• Sold each (unless noted)
• Made in the U.S.A.

TP ENGINEERING Manual Compression Release Valve With Billet Cap, Aluminum, Stainless Steel, SOLD INDIVIDUALLY

• Manufactured from 303 stainless steel
• Available with billet aluminum cap, brass cap or threaded to accept any standard tire valve cap for a truly custom appearance
• Require a .650" 10mm x 1.0mm-threaded hole for installation
• Sold individually
• Made in the U.S.A.

ALLOY ART Compression Release Adapter, 14mm x 3/4" reach

• Designed to be used in twin plug heads
• Accept .650"/10mm x 1.0 compression release valves
• Sold each
• Made in the U.S.A.

S&S CYCLE Replacement Breather Hose, Super E & G, Each, specific application, Harley 93-06 FX 93-06 FL 91 - 03 XL

• Original S&S chrome teardrop air cleaner assemblies
• Include an S&S cover, backing plate and high-quality filter element and hardware kit
• Increase horsepower with no other changes
• Available for most OEM carburetors and S&S performance intake systems
• Available in chrome and black
• Made in the U.S.A.

YOST PERFORMANCE Carburetor Spacer For Super G & D, Polished, size 1"

• Easy way to add extra torque and horsepower
• Machined from solid 6061 T-6 billet aluminum that completely eliminates porosity problems
• Machined finish can be polished to a bright luster
• Made in the U.S.A.

S&S CYCLE Carburetor Float, Super B, Super E, Super G, Each

• Rebuild kits are available in master kits, body-only kits and accelerator pump kits
• Replacement gaskets, O-rings and components are made from the highest-quality materials available
• Made in the U.S.A.

NAMZ Black AMP Multi-Lock Connector, 5-pack, Plug, pins per connector 4

• AMP Multi-Lock connectors are the direct Harley-Davidson replacements that have been used since 1996
• These non-waterproof connectors are used on every factory model
• Includes all necessary wire seals, wedgelocks and crimp terminals
• Includes eight 8-position plugs, eight 6-position plugs, eight 4-position plugs, eight 3-position plugs, eight 2-position plugs and 100 terminals for plugs and caps
• Connectors also available in packs of five or individually
• Crimp terminals are sold separately
• Made in the U.S.A.

NAMZ Black AMP Multi-Lock Connector, 5-pack, Cap, pins per connector 4

• AMP Multi-Lock connectors are the direct Harley-Davidson replacements that have been used since 1996
• These non-waterproof connectors are used on every factory model
• Includes all necessary wire seals, wedgelocks and crimp terminals
• Includes eight 8-position plugs, eight 6-position plugs, eight 4-position plugs, eight 3-position plugs, eight 2-position plugs and 100 terminals for plugs and caps
• Connectors also available in packs of five or individually
• Crimp terminals are sold separately
• Made in the U.S.A.