Name: S&S CYCLE 640 Cam, Harley 84-00 FX 84-99 FL 87 - 94 XL
Brand: S&S Cycle
SKU: DS-09250044
Price: 299.95 USD
Availability: InStock

S&S Cycle

S&S CYCLE 640 Cam, Harley 84-00 FX 84-99 FL 87 - 94 XL

DS-09250044

$299.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 640 Cam, Harley 84-00 FX 84-99 FL 87 - 94 XL

S&S Cams are tested on the dyno, street and track before being offered to the public
With hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produce
Made in the U.S.A.

S&S Cycle

S&S CYCLE 635 H.O. Series Cam Kit, exhaust close 37.5, exhaust duration 276, exhaust open 58.5, intake close 43.5, intake duration 243, intake open 19.5, Harley 06-16 FX 07-16 FL

DS-09250838

$907.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 635 H.O. Series Cam Kit, exhaust close 37.5, exhaust duration 276, exhaust open 58.5, intake close 43.5, intake duration 243, intake open 19.5, Harley 06-16 FX 07-16 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 625 Series Cam Kit, exhaust close 20, Harley 99-06 FX 99-06 FL

DS-20072625

$948.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 625 Series Cam Kit, exhaust close 20, Harley 99-06 FX 99-06 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 635 H.O. Series Cam Kit, Chain, exhaust close 37.5, exhaust duration 276, exhaust open 58.5, intake close 43.5, intake duration 243, intake open 19.5, Harley 06-16 FX 07-16 FL

DS-09250836

$418.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 635 H.O. Series Cam Kit, Chain, exhaust close 37.5, exhaust duration 276, exhaust open 58.5, intake close 43.5, intake duration 243, intake open 19.5, Harley 06-16 FX 07-16 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 625 Series Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

DS-09250530

$418.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 625 Series Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 625 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 06-16 FX 07-16 FL

DS-09250447

$540.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 625 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 06-16 FX 07-16 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 585 Series Cam Kit, exhaust close 20, Harley 99-06 FX 99-06 FL

DS-20072585

$948.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 585 Series Cam Kit, exhaust close 20, Harley 99-06 FX 99-06 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 625 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

DS-09250525

$540.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 625 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 583 Series Cam Kit, Chain, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 99-06 FX 99-06 FL

DS-09250528

$418.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 583 Series Cam Kit, Chain, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 99-06 FX 99-06 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 585 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 06-16 FX 07-16 FL

DS-09250446

$549.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 585 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 06-16 FX 07-16 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 585 Series Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

DS-09250529

$399.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 585 Series Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 583 Series Cam Kit, Chain, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 06-16 FX 07-16 FL

DS-09250745

$399.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 583 Series Cam Kit, Chain, exhaust close 22, exhaust duration 262, exhaust open 60, Harley 06-16 FX 07-16 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 585 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

DS-09250524

$540.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 585 EZ Easy Start Cam Kit, Chain, exhaust close 20, Harley 99-06 FX 99-06 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 583 EZ Easy Start Cam Kit, Chain, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 06-16 FX 07-16 FL

DS-09250445

$549.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 583 EZ Easy Start Cam Kit, Chain, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 06-16 FX 07-16 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 583 EZ Easy Start Cam Kit, Chain, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 99-06 FX 99-06 FL

DS-09250523

$540.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 583 EZ Easy Start Cam Kit, Chain, exhaust close 24, exhaust duration 262, intake close 18, intake duration 204, Harley 99-06 FX 99-06 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 570 EZ Easy Start Cam Kit, Harley 06-16 FX 07-16 FL

DS-09250449

$1,070.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 570 EZ Easy Start Cam Kit, Harley 06-16 FX 07-16 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 570 Series Cam Kit, Harley 06-16 FX 07-16 FL

DS-09250157

$948.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 570 Series Cam Kit, Harley 06-16 FX 07-16 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 570 EZ Easy Start Cam Kit, Includes Installation Kit., Harley 06-16 FX 07-16 FL

DS-09250444

$540.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 570 EZ Easy Start Cam Kit, Includes Installation Kit., Harley 06-16 FX 07-16 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 551 Series Cam Kit, Chain, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL

DS-09250743

$399.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 551 Series Cam Kit, Chain, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 551 Series Cam Kit, Chain, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL

DS-09250526

$418.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 551 Series Cam Kit, Chain, exhaust close 15, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL

Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
A hydraulic press and other professional-level tools are required to install these kits
S&S recommends that adjustable pushrod/cover kit PART #0928-0017 be used
Cam bearings and gaskets must be replaced when installing new cams
Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used
Cams for 06 Dyna and 07-16 Twin Cam are for use with models with hydraulic tensioner chain-drive system; cams 510C and 551C are bolt-in applications, all others require high-lift valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE 557 EZ Easy Start Cam Kit, Chain, exhaust close 12.4, exhaust duration 231, exhaust open 38.8, intake close 26.5, intake duration 212, Harley 06-16 FX 07-16 FL

DS-09250613

$540.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 557 EZ Easy Start Cam Kit, Chain, exhaust close 12.4, exhaust duration 231, exhaust open 38.8, intake close 26.5, intake duration 212, Harley 06-16 FX 07-16 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE 510 Cam, Harley 84-00 FX 84-99 FL 87 - 94 XL

DS-09250076

$254.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 510 Cam, Harley 84-00 FX 84-99 FL 87 - 94 XL

S&S Cams are tested on the dyno, street and track before being offered to the public
With hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produce
Made in the U.S.A.

S&S Cycle

S&S CYCLE 551 EZ Easy Start Cam Kit, Chain, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL

DS-09250443

$549.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 551 EZ Easy Start Cam Kit, Chain, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 06-16 FX 07-16 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE Four-Gear Set For Gear Driven Cams, 4-Pack, Harley 06-16 FX 07-16 FL

DS-09250152

$634.95

In Stock

Shipping calculated at checkout.

S&S CYCLE Four-Gear Set For Gear Driven Cams, 4-Pack, Harley 06-16 FX 07-16 FL

A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware
Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams; oversized and undersized gears are available to help achieve correct gear lash
Made in the U.S.A.

S&S Cycle

S&S CYCLE 551 EZ Easy Start Cam Kit, Chain, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL

DS-09250521

$540.95

In Stock

Shipping calculated at checkout.

S&S CYCLE 551 EZ Easy Start Cam Kit, Chain, exhaust close 17, exhaust duration 237, exhaust lift .550", Harley 99-06 FX 99-06 FL

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
Available in chain drive and gear drive versions
All chain-drive cams include installation kit
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

S&S Cycle

S&S CYCLE Camshaft Pinion Gear, Each, Oversize, Harley 99-16 FX 99-16 FL

DS-09250095

$132.95

In Stock

Shipping calculated at checkout.

S&S CYCLE Camshaft Pinion Gear, Each, Oversize, Harley 99-16 FX 99-16 FL

A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware
Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams; oversized and undersized gears are available to help achieve correct gear lash
Made in the U.S.A.

S&S Cycle

S&S CYCLE Camshaft Pinion Gear, Each, Undersize, Harley 99-16 FX 99-16 FL

DS-09250094

$132.95

In Stock

Shipping calculated at checkout.

S&S CYCLE Camshaft Pinion Gear, Each, Undersize, Harley 99-16 FX 99-16 FL

A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware
Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams; oversized and undersized gears are available to help achieve correct gear lash
Made in the U.S.A.

S&S Cycle

S&S CYCLE TC3 Oil Pump And Cam Support Plate Kit, Harley 06-16 FX 07-16 FL

DS-09320111

$836.95

In Stock

Shipping calculated at checkout.

S&S CYCLE TC3 Oil Pump And Cam Support Plate Kit, Harley 06-16 FX 07-16 FL

Precision CNC machined forged aluminum
Increased structural strength
Dimensional stability
Freedom for internal porosity
Separate scavenge sections for flywheel cavity and cam chest scavenge each area more efficiently with no interference
Gerotors are designed to tolerate more pinion shaft runout without damage
Cam chest pic up features a magnetic trap to protect scavenge rotors from metal debris
Both scavenge rotors are protected from debris, the most common cause of stock oil pump failure
Passage plugs are removable for service
Bronze pinion shaft bushing in all models and bronze cam bushings in 07-15 style can be replaced
Adjustable oil pressure regulator - adjust without removing plate from engine
99-06 cam support plate is designed to use late style hydraulic cam chain tensioners because stock spring-loaded tensioners used in 99-06 models don't adequately control the valve train at high rpm, especially with higher lift cams or performance valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE TC3 Oil Pump And Cam Support Plate Kit, Harley 99-06 FX 99-06 FL

DS-09320110

$836.95

In Stock

Shipping calculated at checkout.

S&S CYCLE TC3 Oil Pump And Cam Support Plate Kit, Harley 99-06 FX 99-06 FL

Precision CNC machined forged aluminum
Increased structural strength
Dimensional stability
Freedom for internal porosity
Separate scavenge sections for flywheel cavity and cam chest scavenge each area more efficiently with no interference
Gerotors are designed to tolerate more pinion shaft runout without damage
Cam chest pic up features a magnetic trap to protect scavenge rotors from metal debris
Both scavenge rotors are protected from debris, the most common cause of stock oil pump failure
Passage plugs are removable for service
Bronze pinion shaft bushing in all models and bronze cam bushings in 07-15 style can be replaced
Adjustable oil pressure regulator - adjust without removing plate from engine
99-06 cam support plate is designed to use late style hydraulic cam chain tensioners because stock spring-loaded tensioners used in 99-06 models don't adequately control the valve train at high rpm, especially with higher lift cams or performance valve springs
Made in the U.S.A.

S&S Cycle

S&S CYCLE TC3 Cam Plate, Chain, Gear, Harley 06-16 FX 07-16 FL

DS-09250914

$438.95

In Stock

Shipping calculated at checkout.

S&S CYCLE TC3 Cam Plate, Chain, Gear, Harley 06-16 FX 07-16 FL

Precision CNC-machined forged aluminum
Adjustable oil pressure regulator; adjust without removing plate from the engine
Passage plugs are removable for service
Rebuildable bronze pinion shaft bushing in all models and bronze cam bushings in 07-later style
Made in the U.S.A.

S&S Cycle

S&S CYCLE TC3 Cam Plate, Gear, Harley 99-06 FX 99-06 FL

DS-09250915

$438.95

In Stock

Shipping calculated at checkout.

S&S CYCLE TC3 Cam Plate, Gear, Harley 99-06 FX 99-06 FL

Precision CNC-machined forged aluminum
Adjustable oil pressure regulator; adjust without removing plate from the engine
Passage plugs are removable for service
Rebuildable bronze pinion shaft bushing in all models and bronze cam bushings in 07-later style
Made in the U.S.A.

S&S Cycle

S&S CYCLE Top End Gasket Kit For 84-99 S&S Super Stock Evolution

DS-909507

$113.95

In Stock

Shipping calculated at checkout.

S&S CYCLE Top End Gasket Kit For 84-99 S&S Super Stock Evolution

Contain the best quality gaskets available
Available in top-end or lower-end kits
Made in the U.S.A.

S&S Cycle

S&S CYCLE Top End Gasket Kit For 99-06 S&S Super Stock Twin Cam

DS-909504

$133.95

In Stock

Shipping calculated at checkout.

S&S CYCLE Top End Gasket Kit For 99-06 S&S Super Stock Twin Cam

Contain the best quality gaskets available
Available in top-end or lower-end kits
Made in the U.S.A.

S&S Cycle

S&S CYCLE Top End Gasket Kit For 84-06 S&S Super Stock Evolution And Twin Cam

DS-909506

$112.95

In Stock

Shipping calculated at checkout.

S&S CYCLE Top End Gasket Kit For 84-06 S&S Super Stock Evolution And Twin Cam

Contain the best quality gaskets available
Available in top-end or lower-end kits
Made in the U.S.A.

S&S Cycle

S&S CYCLE Top End Gasket Kit For 84-99 S&S Super Stock Evolution, bore size 3.625"

DS-909502

$99.95

In Stock

Shipping calculated at checkout.

S&S CYCLE Top End Gasket Kit For 84-99 S&S Super Stock Evolution, bore size 3.625"

Contain the best quality gaskets available
Available in top-end or lower-end kits
Made in the U.S.A.

Brand

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Join the K and G Cycles family of friends