Mid-USA

Primary Cover Gasket,Outer St 1989/2006,Dyna 1991/2005 Rpls Hd 60539-94B

• Economically priced
• High quality for sure scaling
• Sold each

POWER HOUSE
iber with Silicone Bead
Primary Cover Gasket
Fits Softail 1989/2006 & Dyna 1991/2005
Replaces HD# 60539-94B

Performance Alternator Rotor Use With 38 Or 45 Amp Systems Rpls Hd 29999-97B & 29981-95
V-FACTOR
Standard Black Rotor
Fits Big Twin 1997/2005 with 38-45 Amp charging system
(Imported)

Custom Springer Rocker Studs Hardbody Wide Springers & Most Custom Wide Springers,Chrome
HARDBODY
Chrome Plated Rocker Studs (Set of 4)

Threaded diameter is ½”

Length of threaded part is 9/16”

HARDBODY

Spring Kit for Springer Forks Use with Most Custom Springers Inc Springs, Rods, Seats & Nuts

Spark Plug Covers, Sparkies Red Lens Fits All H-D Spark Plugs W/90 Degree Boots

• Designed to show your engine's spark through colored lenses at the base of the wire

V-FACTOR
Sparkies Spark Plug Cover Pair with Red Lens
Fits all Harley-Davidson spark plugs with 90° boot
For 7mm or 8mm plug wires
Sold in pairs
(Imported)

Rear Axle For Custom Use 3/4" Diameter, 13.5" Long Chrome Steel

• Wide assortment for builders who are looking for a specific size
• Chrome plated 4130 cold roll steel
  
• See product image for description of lengths

V-FACTOR
Chrome Plated Axle
A Length: 13 ¹/₂", B Length: 12 ¹/₄"
3/4" Diameter
(Imported)

Harley-Davidson Front Fork Tubes Flt/Flh 84/99 Stock Length Rpls Hd# 45827-84

• All fork slider tubes are centerless ground from seamless aircraft tubing in either show chrome (USA) or hard chrome (Import)
• All fork tubes are sold in pairs and include spring spacers

Hard Chrome Plated
Stock 20 7/8 Length Set fits FLT, FLTC, FLTCU, FLHT, FLHTC, FLHTCU, FLHS, FLHR 1986/1996 with or without air forks
Replaces HD# 45827-84
2 US Length Set fits LST, LSTC, LST, LSTN 1986/1999
Replaces HD# 45930-86

Air Filter Element Sportster 1988/2003 Rpls Hd# 29331-96

• Engineered for increased performance
• Washable and reusable high flow 4-layer cotton element increases air flow while offering unmatched filtration for long engine life
• Not only will these filters increase horsepower in stock engines, they are a must when performance upgrades have been done your motorcycle
• Sold each

V-FACTOR
Air ilter Element, 1 5/8 width
Fits Sportster 1988/2003
Replaces HD# 29331-96

Gas Tank Center Panel,Steel Rd Side Fat Bob Tanks W/O Gauges Plain Chrome Plated
Gas Tank Center Panels available as listed. Complete with mounting hardware.V-FACTOR
Chrome Plated Kit for use with Solid Mount at Bob Tanks when not using stock instrument panel cover
(Imported)

Springer Shock Absorber, Chrome FXSTS 1988/2006 Replaces HD# 54483-88

• High quality OE replacement springer shock absorber
• Sold Each

V-FACTOR
Chrome Plated Shock Absorber
Fits XSTS 1988/2006
Replaces HD# 54483-88

Starter Relay,Delco Remy Style Bt 67/E68,Sportster 65/73 Replaces Hd 71455-67C

• High quality Delco Remy style relay

V-FACTOR
Fits Big Twin 1967/Early 1968 & Sportster Late 1971/1974
Replaces HD# 71455-67C

Handlebar Oe Ape Hanger Style Fxdwg 1993/Later* W/Crimp & Knurled Center Rpls 56079-93

• Fits like OE handlebars
• Dimpled for wiring and has diamond knurls for security
• Designed to be used in stock applications as listed and for any custom application you desire
• Total width 33, rise to handlebar grip end 9 ¹/₂, center width to beginning of bends 6, total pullback 8
• Designed for risers on 3 ¹/₂ centers

V-FACTOR
Chrome Plated
Fits XDWG 1993/Later
Replaces HD# 56079-93
(Imported)

Coil High Performance Rd 4 Ohm 12 Volt All Models 1965/1979 W/Mount Cp Rpls Hd 31609-65A
These high performance dual fire round coils produce 10% greater output capacity than stock and include a seat post type mount. The two 7mm copper core spark plug wires measure 23 long and can be cut to the desired length. The screw-on tower caps include rubber seals to keep any moisture out. V-FACTOR
Chrome Plated, 12 volt, 4 OHM
Fits Big Twin 1965/1979
Replaces HD# 31609-65A
(Imported)

Rocker Arm,Shims "010" Thick Shovelhead 66/Later Use To Set End Clearance Mfg #2253
HARDWARE
Rocker Arm Shim, .010 Thick
Fits Shovelhead all years
Package of 10

Oil Tank Dipstick W/Tempgauge Sportster 2004/Later* Rpls Hd 63023-05

• Monitor your oil temperature with this chrome dipstick/temperature gauge
• Design of this dipstick provides a grip area for easy removal

V-FACTOR
Chrome Plated Dipstick
Fits Sportster models 2004/Later
Replaces HD# 63023-05

Conical Air Filter Cover Forged Aluminum, Chrome Plated Rpls Hd 28740-10

• These forward facing, exposed filter intake kits offer performance and racing looks
• The intake elbow and mount plate are made from light weight die cast aluminum and feature a show quality finish

Not legal for sale or use in California, or on any pollution-controlled vehiclesV-FACTOR
Chrome Add-On Conical Air Filter Cover
Add this forged aluminum filter cover to either mass flow intake for a custom look
Replaces HD# 28740-10

Wheel,Bearing I.D. Reducer Stl 3/4" Axle,W/1"Id Ball Bearing 1" Id Bearing To 3/4" Id

• Reducers are designed to convert wheels with 1 I.D. sealed (ball type) bearings to a ³/₄ O.D. axle

HARDBODY
Stainless Steel Pair
(Imported)

Rocker Arm,Shims .007" Thick Shovelhead 66/Later Use To Set End Clearance Mfg #2252
HARDWARE
Rocker Arm Shim, .007 Thick
Fits Shovelhead all years
Package of 10

Cruisemate Installation Kit Use With 1982/L* W Throttle Cables Mfg# 9800

• Cruise-Mate is an easy to use lever operated throttle assist
• Once installed, Cruise-Mate is extremely reliable and easy to operate
• To set the throttle simply flip lever forward (towards front of bike); you can still turn throttle once Cruise-Mate is set
• lip lever back (toward rear of bike) and throttle returns to normal operation
• When adjusted properly the throttle does not lock completely and can be turned back to the closed position without touching the lever in the event of an emergency
• It is not a cruise control and will not maintain speed when going uphill
• All internal parts are made from Stainless Steel
• Cruise-Mate is infinitely adjustable for proper tension in a few seconds
• Lifetime Guarantee

Ironbraid
Install Kit for 1982/Later with dual throttle cables
Note: All 2008/Later Road Kings & 2015/Later Softail require Installation Kit 42135

Handlebar Brake Light Switch, Big Twin & Spt 1982/1995 Rpls Hd 71574-82 & 71590-92

• High quality original equipment style replacement handlebar switches
• See below for availability of finishes
• Meets OEM specifications
• Include OEM length wires for ease of installation

V-FACTOR
Brake Light Switch
Fits Big Twin & Sportster 1982/1995
Replaces HD# 71574-82 & 71590-92

Oil Cooler Standoff Clamps Cp Use With #89000 Oil Cooler 1-1/8" X 1-1/8" Aluminum

• Billet oil cooler has twin vertical tubes that follow the front downtubes on the frames of most models
• See below for availability of finish
• Requires standoff clamps for oil cooler

V-FACTOR
Chrome Plated Clamp Pair, 1 1/8 x 1 1/8
Required for use with 89000

Fuel & Oil Line,Clear Vinyl 5/16"Id X 9/16"Od 1/8"W 25 Ft Nylon Braid Reinforced

• ¹/₈ wall, open mesh nylon braiding has been incorporated within the clear vinyl, producing a pliable hose which will not shrink or harden
• Withstands high temperatures and pressures up to 750 PSI
• Highly resistant to fuel, oil and custom blended fuels

V-FACTOR
⁵/₁₆ I.D. x ⁹/₁₆ O.D. fuel & oil line
25 foot roll, (Imported)

Brake Pads For Custom Caliper Fits Jaybrake J-Four Caliper Copper Sintered Material

• Copper sintered material for long life and quiet operation
• Economically priced
• See Additional Image for dimensions
• Sold in pairs

V-FACTOR
Copper Sintered Material Brake Pads
Fits Custom Calipers

Springer Spring Seat Top Use With Most Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Spring Seat Top (Sold as Pair)

Lower External Spring Set Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Lower External Spring Set (Sold as Pair)