Mid-USA

Filter

Filter

Brand

clear
23 products

23 products

Quick view
Oil Pressure Gauge Fitting BT Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036
Mid-USA
$37.15
Quick view
Oil Pressure Gauge Fitting Kit Big Twin 1970/Later(Ex Tc88) 2 Pieces & O Ring Cp Mfg #2012
Mid-USA
$17.70
Quick view
Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89
Mid-USA
$4.40
Quick view
Dual 2 5/8" Gauge Bracket Fits 1-1/4" T-Bars,Flat Mount Polished Billet Alum 9084Md
Mid-USA
$163.35
Quick view
Mounting Bracket,Ins Panel Uw/1-1/4"Handlebars & #48059 Billet Alum Chrome Plt Wp127
Mid-USA
$116.99
Quick view
Mounting Bracket,Ins Panel Uw/1-1/2" Handlebars & #48059 Billet Alum Chrome Plt Wp128
Mid-USA
$109.68
Quick view
Mounting Bracket,Ins Panel Tab Mtg Uw/Aftermarket Brks & #48059 Billet Alum Cp Wp129
Mid-USA
$38.87
Quick view
Oil Pressure Gauge Fitting BT Evo 84/L,Use W/O Sending Unit,Anodized Silver
Mid-USA
$11.90
Quick view
Oil Pressure Gauge Fitting BT Evo 84/L Use W/O Sending Unit Anodized Silver .2038
Mid-USA
$37.15
Quick view
Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013
Mid-USA
$8.45
Sold Out
Oil Pressure Gauge Fitting,Kit Fits Big Twin Case 1936/1969 Chrome Plated Mfg #2014/2015
Mid-USA
$13.95
Quick view
Oil Pressure Gauge Fitting,Kit Evo Big Twin W/Rocker Box Bracket Chrome Mfg .2024
Mid-USA
$39.65
Quick view
Oil Pressure Gauge Fitting,Rkr Sh & Ihd Spt Late 1971/Later Hex Head Chromed......Mfg.2021
Mid-USA
$34.95
Quick view
Mounting Cup Raw Stl Weld In Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4003
Mid-USA
$72.00
Quick view
Mounting Cup Chrome Uw Clamp Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4001
Mid-USA
$88.00
Quick view
Gauge Housing Cover Raw Steel Dakota Digital Series 3000 Rd Spdo/Tach M# Cup-3003
Mid-USA
$74.00
Sold Out
Gauge Housing Cover Chrome Uw Dakota Digital Series 3000 Rd Speedo/Tach Mfg# Cup-3001
Mid-USA
$88.00
Quick view
Dual 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081Md
Mid-USA
$167.95
Sold Out
Dual 2 5/8" Gauge Bracket Fits Hd Straight Risers,Angled Mt Polished Billet Alum 9080Md
Mid-USA
$173.55
Sold Out
Single 2 5/8" Gauge Bracket Fits 1-1/2" T-Bars Flat Mount Polished Billet Alum 9085M
Mid-USA
$96.67
Quick view
Single 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081M
Mid-USA
$105.90
Quick view
Single 2 5/8" Gauge Bracket Fits Hd Straight Risers,Angled Mt Polished Billet Alum 9080M
Mid-USA
$111.10
Sold Out
Replacement Clamp Kit Use With Custom Speedo/Tach Fits Bars 3/4" Up To 1-1/4"
Mid-USA
$7.63
Oil Pressure Gauge Fitting BT Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036 Harley Mid-USA - K and G Cycles
Mid-USA

Oil Pressure Gauge Fitting BT Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036

MID-85206

$37.15

In Stock

Save $-37.15
/
Shipping calculated at checkout.
Oil Pressure Gauge Fitting Bt Evo 84/L Use W/Sending Unit Anodized Silver Mfg .2036
  • Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
  • Available to be used with or without the oil pressure sending unit as listed below
  • These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
  • Oil pressure gauge and sending unit not included
  • Oil pressure sending unit found in the engine section
HARDWARE
Anodized Silver Oil Pressure Gauge itting for use with sending unit
Fits Big Twin Evolution, all years
Oil Pressure Gauge Fitting Kit Big Twin 1970/Later(Ex Tc88) 2 Pieces & O Ring Cp Mfg #2012 Harley Mid-USA - K and G Cycles
Mid-USA

Oil Pressure Gauge Fitting Kit Big Twin 1970/Later(Ex Tc88) 2 Pieces & O Ring Cp Mfg #2012

MID-85101

$17.70

In Stock

Save $-17.70
/
Shipping calculated at checkout.
Oil Pressure Gauge Fitting Kit Big Twin 1970/Later(Ex Tc88) 2 Pieces & O Ring Cp Mfg #2012
  • Complete Adapter kits available without oil pressure gauge
  • or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
  • or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block
HARDWARE
Chrome Plated Adapter
Fits Shovelhead 1970/Later & Big Twin Evolution, all years
Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89 Harley Mid-USA - K and G Cycles
Mid-USA

Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89

MID-48270

$4.40

In Stock

Save $-4.40
/
Shipping calculated at checkout.
Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89
V-FACTOR
Rubber Damper
Fits 1968/1995 with cast dash
Replaces HD# 67190-89
(Imported)
Dual 2 5/8" Gauge Bracket Fits 1-1/4" T-Bars,Flat Mount Polished Billet Alum 9084Md Harley Mid-USA - K and G Cycles
Mid-USA

Dual 2 5/8" Gauge Bracket Fits 1-1/4" T-Bars,Flat Mount Polished Billet Alum 9084Md

MID-48153

$163.35

In Stock

Save $-163.35
/
Shipping calculated at checkout.
Dual 2 5/8" Gauge Bracket Fits 1-1/4" T-Bars,Flat Mount Polished Billet Alum 9084Md
  • Designed for use with our Pro-Cycle by Autometer tachometers and speedometers found in the control section, but can also be used with other brands that have a 2 5/8 cup size
  • Includes internal O-ring for clampless gauge mounting
  • CNC machined from billet aluminum
  • See the control section for longer riser clamp bolts with spacers
Cycle Performance
Polished Dual Gauge
Fits custom T-Bars with 1 1/4 O.D. pullback risers
lat angle, 3 1/2 mounting centers
Mounting Bracket,Ins Panel Uw/1-1/4"Handlebars & #48059 Billet Alum Chrome Plt Wp127 Harley Mid-USA - K and G Cycles
Mid-USA

Mounting Bracket,Ins Panel Uw/1-1/4"Handlebars & #48059 Billet Alum Chrome Plt Wp127

MID-48257

$116.99

In Stock

Save $-116.99
/
Shipping calculated at checkout.
Mounting Bracket,Ins Panel Uw/1-1/4"Handlebars & #48059 Billet Alum Chrome Plt Wp127
  • Compact design of this instrument panel combines all of the functions of multiple gauges and indicators in one custom package
  • Main functions include bar graph type tachometer and digital read-out speedometer (MPH or KPH) with odometer and tripometer
  • Indicator lights include turn signal, high beam, low oil pressure and neutral
  • A charging system monitor that displays a low charging rate or an overcharge rate is also included
  • Speedometer calibration is easily accomplished (with an on-screen push button) by using a known distance such as highway mile markers
  • The super bright display can easily be seen in daylight but will automatically dim at night
  • Panel housing is CNC machined from billet aluminum and the contents are epoxy sealed for moisture, vibration and corrosion resistance
  • Instrument panel measures 2 long x 3.350 wide x 1 tall and requires one of the mounting brackets listed
  • Instructions are included
Note: Requires the OEM transmission mounted speed sensor found on most 1995/Later models and an aftermarket ignition system that has a separate digitally operated tachometer output wire. The tachometer will not operate directly off of the coil's primary terminal.Wire Plus
Chrome Plated 1 1/4 O.D. handlebar bracket
Mounting Bracket,Ins Panel Uw/1-1/2" Handlebars & #48059 Billet Alum Chrome Plt Wp128 Harley Mid-USA - K and G Cycles
Mid-USA

Mounting Bracket,Ins Panel Uw/1-1/2" Handlebars & #48059 Billet Alum Chrome Plt Wp128

MID-48258

$109.68

In Stock

Save $-109.68
/
Shipping calculated at checkout.
Mounting Bracket,Ins Panel Uw/1-1/2" Handlebars & #48059 Billet Alum Chrome Plt Wp128
  • Compact design of this instrument panel combines all of the functions of multiple gauges and indicators in one custom package
  • Main functions include bar graph type tachometer and digital read-out speedometer (MPH or KPH) with odometer and tripometer
  • Indicator lights include turn signal, high beam, low oil pressure and neutral
  • A charging system monitor that displays a low charging rate or an overcharge rate is also included
  • Speedometer calibration is easily accomplished (with an on-screen push button) by using a known distance such as highway mile markers
  • The super bright display can easily be seen in daylight but will automatically dim at night
  • Panel housing is CNC machined from billet aluminum and the contents are epoxy sealed for moisture, vibration and corrosion resistance
  • Instrument panel measures 2 long x 3.350 wide x 1 tall and requires one of the mounting brackets listed
  • Instructions are included
Note: Requires the OEM transmission mounted speed sensor found on most 1995/Later models and an aftermarket ignition system that has a separate digitally operated tachometer output wire. The tachometer will not operate directly off of the coil's primary terminal.Wire Plus
Chrome Plated 1 1/2 O.D. handlebar bracket
Mounting Bracket,Ins Panel Tab Mtg Uw/Aftermarket Brks & #48059 Billet Alum Cp Wp129 Harley Mid-USA - K and G Cycles
Mid-USA

Mounting Bracket,Ins Panel Tab Mtg Uw/Aftermarket Brks & #48059 Billet Alum Cp Wp129

MID-48259

$38.87

In Stock

Save $-38.87
/
Shipping calculated at checkout.
Mounting Bracket,Ins Panel Tab Mtg Uw/Aftermarket Brks & #48059 Billet Alum Cp Wp129
  • Compact design of this instrument panel combines all of the functions of multiple gauges and indicators in one custom package
  • Main functions include bar graph type tachometer and digital read-out speedometer (MPH or KPH) with odometer and tripometer
  • Indicator lights include turn signal, high beam, low oil pressure and neutral
  • A charging system monitor that displays a low charging rate or an overcharge rate is also included
  • Speedometer calibration is easily accomplished (with an on-screen push button) by using a known distance such as highway mile markers
  • The super bright display can easily be seen in daylight but will automatically dim at night
  • Panel housing is CNC machined from billet aluminum and the contents are epoxy sealed for moisture, vibration and corrosion resistance
  • Instrument panel measures 2 long x 3.350 wide x 1 tall and requires one of the mounting brackets listed
  • Instructions are included
Note: Requires the OEM transmission mounted speed sensor found on most 1995/Later models and an aftermarket ignition system that has a separate digitally operated tachometer output wire. The tachometer will not operate directly off of the coil's primary terminal.Wire Plus
Chrome Plated Tab mount for custom application
Oil Pressure Gauge Fitting BT Evo 84/L,Use W/O Sending Unit,Anodized Silver Harley Mid-USA - K and G Cycles
Mid-USA

Oil Pressure Gauge Fitting BT Evo 84/L,Use W/O Sending Unit,Anodized Silver

MID-85208

$11.90

In Stock

Save $-11.90
/
Shipping calculated at checkout.
Oil Pressure Gauge Fitting Bt Evo 84/L,Use W/O Sending Unit,Anodized Silver
  • Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
  • Available to be used with or without the oil pressure sending unit as listed below
  • These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
  • Oil pressure gauge and sending unit not included
  • Oil pressure sending unit found in the engine section
V-FACTOR
Anodized Silver Oil Pressure Gauge itting without sending unit
Fits Big Twin Evolution, all years,
(Imporetd)
Oil Pressure Gauge Fitting BT Evo 84/L Use W/O Sending Unit Anodized Silver .2038 Harley Mid-USA - K and G Cycles
Mid-USA

Oil Pressure Gauge Fitting BT Evo 84/L Use W/O Sending Unit Anodized Silver .2038

MID-85207

$37.15

In Stock

Save $-37.15
/
Shipping calculated at checkout.
Oil Pressure Gauge Fitting Bt Evo 84/L Use W/O Sending Unit Anodized Silver .2038
  • Made from 6061-T6 billet aluminum with 1/8 NPT male and female threads
  • Available to be used with or without the oil pressure sending unit as listed below
  • These units must be installed with the use of Teflon thread tape to face dial on pressure gauge at the correct angle
  • Oil pressure gauge and sending unit not included
  • Oil pressure sending unit found in the engine section
HARDWARE
Anodized Silver Oil Pressure Gauge itting without sending unit
Fits Big Twin Evolution, all years
Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013 Harley Mid-USA - K and G Cycles
Mid-USA

Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013

MID-85204

$8.45

In Stock

Save $-8.45
/
Shipping calculated at checkout.
Oil Pressure Gauge Adapter Big Twin 1970/1999 (Ex Tc) Includes O-Ring Mfg#2013
  • Complete Adapter kits available without oil pressure gauge
  • or the early generator models (1936/1969), the adapter fits directly into the oil pump replacing the oil pressure sending switch
  • or the later Shovelhead and Big Twin Evolution alternator engines 1970/Later, the adapter replaces the top end feed screen plug found on the engine block
HARDWARE
Chrome Plated Oil Pressure Gauge Adapter
Fits Big Twin 1970/1999 (except Twin Cam)
Oil Pressure Gauge Fitting,Kit Evo Big Twin W/Rocker Box Bracket Chrome Mfg .2024 Harley Mid-USA - K and G Cycles
Mid-USA

Oil Pressure Gauge Fitting,Kit Evo Big Twin W/Rocker Box Bracket Chrome Mfg .2024

MID-85131

$39.65

In Stock

Save $-39.65
/
Shipping calculated at checkout.
Oil Pressure Gauge Fitting,Kit Evo Big Twin W/Rocker Box Bracket Chrome Mfg .2024
  • Fits into the engine case and the oil pressure gauge bolts to the rocker box using strap
  • Complete with chrome plated adapters and oil line to place the oil pressure gauge within easy sight
  • Oil gauge is not included
HARDWARE
Chrome Plated Kit
Fits Big Twin Evolution, all years
Oil Pressure Gauge Fitting,Rkr Sh & Ihd Spt Late 1971/Later Hex Head Chromed......Mfg.2021 Harley Mid-USA - K and G Cycles
Mid-USA

Oil Pressure Gauge Fitting,Rkr Sh & Ihd Spt Late 1971/Later Hex Head Chromed......Mfg.2021

MID-85130

$34.95

In Stock

Save $-34.95
/
Shipping calculated at checkout.
Oil Pressure Gauge Fitting,Rkr Sh & Ihd Spt Late 1971/Later Hex Head Chromed......Mfg.2021
  • Mounts on rocker box
  • Enables you to watch your oil pressure while riding your bike
  • Replaces the rocker arm shaft end plug and clear all seats and gas tanks
  • Installation instructions included
HARDWARE
Chrome Plated Hex Head
Fits Shovelhead & Ironhead Sportster Late 1971/Later
Mounting Cup Raw Stl Weld In Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4003 Harley Mid-USA - K and G Cycles
Mid-USA

Mounting Cup Raw Stl Weld In Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4003

MID-48267

$72.00

In Stock

Save $-72.00
/
Shipping calculated at checkout.
Mounting Cup Raw Stl Weld In Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4003
  • 4000 Series
  • 1 7/8 O.D. gauge features a high brightness dot matrix type vacuum fluorescent graphic display that has a blackout display when turned off
  • Speedometer has a 0 through 255 MPH range with odometer and resettable trip odometer
  • Tachometer has a 0 through 18,000 RPM range, features high RPM recall and is adjustable from one to fifteen cylinders
  • Oil pressure gauge has a range of 0 through 150 PSI in increments of 1 PSI
  • Housing is 1 3/8 deep with 2 1/16 O.D. bezel
Dakota Digital
Raw Steel Cup for weld-on applications
Mounting Cup Chrome Uw Clamp Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4001 Harley Mid-USA - K and G Cycles
Mid-USA

Mounting Cup Chrome Uw Clamp Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4001

MID-48266

$88.00

In Stock

Save $-88.00
/
Shipping calculated at checkout.
Mounting Cup Chrome Uw Clamp Dakota 4000 Series Gauges Only Dakota Digital M#Cup-4001
  • 4000 Series
  • 1 7/8 O.D. gauge features a high brightness dot matrix type vacuum fluorescent graphic display that has a blackout display when turned off
  • Speedometer has a 0 through 255 MPH range with odometer and resettable trip odometer
  • Tachometer has a 0 through 18,000 RPM range, features high RPM recall and is adjustable from one to fifteen cylinders
  • Oil pressure gauge has a range of 0 through 150 PSI in increments of 1 PSI
  • Housing is 1 3/8 deep with 2 1/16 O.D. bezel
Dakota Digital
Chrome Cup for use with handlebar clamp (Aluminum)
Gauge Housing Cover Raw Steel Dakota Digital Series 3000 Rd Spdo/Tach M# Cup-3003 Harley Mid-USA - K and G Cycles
Mid-USA

Gauge Housing Cover Raw Steel Dakota Digital Series 3000 Rd Spdo/Tach M# Cup-3003

MID-48264

$74.00

In Stock

Save $-74.00
/
Shipping calculated at checkout.
Gauge Housing Cover Raw Steel Dakota Digital Series 3000 Rd Spdo/Tach M# Cup-3003
  • Odyssey Series II, 2 1/16 O.D.
  • Designed with the chopper in mind, these gauges do not require any hard to hide external module
  • Gauges are sold separately and will require the appropriate housing cover and mounting bracket as needed
  • Speedometers will also require the appropriate sensor, adapter or sending unit as listed
  • The gauges feature high visibility digital numerals that are easy to read in full sunlight and include a non-glare high contrast lens
  • All calibration is done with the function button
  • The tachometer features an adjustable warning point to flash the gauge readout and includes a high RPM readout
Dakota Digital
Required Mount
Raw Steel Gauge Housing Cover for welding on to custom made handlebars
Dual 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081Md Harley Mid-USA - K and G Cycles
Mid-USA

Dual 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081Md

MID-48151

$167.95

In Stock

Save $-167.95
/
Shipping calculated at checkout.
Dual 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081Md
  • Designed for use with our Pro-Cycle by Autometer tachometers and speedometers found in the control section, but can also be used with other brands that have a 2 5/8 cup size
  • Includes internal O-ring for clampless gauge mounting
  • CNC machined from billet aluminum
  • See the control section for longer riser clamp bolts with spacers
Cycle Performance
Polished Dual Gauge
Fits all models 1973/Later (except Springer & Deuce) with OE style upper riser clamp & pullback risers
lat angle, 2 3/4 mounting centers
Single 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081M Harley Mid-USA - K and G Cycles
Mid-USA

Single 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081M

MID-48145

$105.90

In Stock

Save $-105.90
/
Shipping calculated at checkout.
Single 2 5/8" Gauge Bracket Fits Hd Pullback Risers,Flat Mt Polished Billet Alum 9081M
  • Designed for use with our Pro-Cycle by Autometer tachometers and speedometers found in the control section, but can also be used with other brands that have a 2 5/8 cup size
  • Includes internal O-ring for clampless gauge mounting
  • CNC machined from billet aluminum
  • See the control section for longer riser clamp bolts with spacers
Cycle Performance
Polished Single Gauge
Fits all models 1973/Later (except Springer & Deuce) with OE style upper riser clamp & pullback risers
lat angle, 2 3/4 mounting centers
Single 2 5/8" Gauge Bracket Fits Hd Straight Risers,Angled Mt Polished Billet Alum 9080M Harley Mid-USA - K and G Cycles
Mid-USA

Single 2 5/8" Gauge Bracket Fits Hd Straight Risers,Angled Mt Polished Billet Alum 9080M

MID-48144

$111.10

In Stock

Save $-111.10
/
Shipping calculated at checkout.
Single 2 5/8" Gauge Bracket Fits Hd Straight Risers,Angled Mt Polished Billet Alum 9080M
  • Designed for use with our Pro-Cycle by Autometer tachometers and speedometers found in the control section, but can also be used with other brands that have a 2 5/8 cup size
  • Includes internal O-ring for clampless gauge mounting
  • CNC machined from billet aluminum
  • See the control section for longer riser clamp bolts with spacers
Cycle Performance
Polished Single Gauge
Fits all models 1973/Later (except Springer & Deuce) with OE style upper riser clamp & straight risers
30° angle, 2 3/4 mounting centers