Motorcycle Exhaust Clamps

KHROME WERKS Stainless Steel Muffler Clamps, Natural, Raw, made in the usa, Pair, 1-3/4" i.d.

• Feature a 1.25" wide stainless band with an exclusive reaction block for 360 clamping without muffler or header distortion
• High-strength fastener hardware with corrosion-resistant coating included
• Replace 1" W OEM muffler clamps; fit mufflers with 1.75" i.d. inlets
• Sold in pairs
• Made in the U.S.A.

Exhaust Pipe Clamp,End 2" Id Fits 2" Od Exhause Pipes & Mufflers 1/8"Thick X 3/4"Wide

• High quality clamps made of 1/8 thick cold rolled steel
• Use with brackets to fasten exhaust pipes securely to frame or to secure mufflers to exhaust pipes
• Use with 5/16 x 1 bolt, nut and washer found in the general merchandise section

HARDWARE
Chrome Plated Clamp, 2 I.D. x 3/4 width

V-Twin Manufacturing Fishtail Hanger Clamp Set w/out Bolts - Set

Clamp set without bolts for fishtail exhaust.
Sold in a quantity of 2.

FLT 1995-UP

Tech Note:

Suggested to use on #30-3251 fishtail exhaust.

DRAG SPECIALTIES Stainless Steel Worm Clamps, 2.25" - 3.25"

• Feature a narrow design with a low-profile head
• Secure exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions
• Come in two sizes
• Sold in packs of four
• Made in the U.S.A.

DRAG SPECIALTIES Stainless Steel Worm Clamps, 1.25" - 2.25"

• Feature a narrow design with a low-profile head
• Secure exhaust heat wraps or can be used any place extra clamping is needed in extreme temps or conditions
• Come in two sizes
• Sold in packs of four
• Made in the U.S.A.

Exh Pipe Clamp W/Strap 5.75 Lg 1-3/4"Id For 1-3/4"Od Exh Pipe W/O Mtg Bolt Hole Cp W/Hrdw
1 3/4 I.D. High quality heavy duty chrome plated steel clamp with attached 5 3/4 mounting strap. Without mounting bolt hole. Includes hardware. Fits 1 3/4 O.D. Pipes. (Imported)

Super Exhaust Port Clamp Panhead 1948/1965 Chrome Pltd 1/8" Steel Wall W/Allen Bolts

• Unmatched, super-sealing exhaust port connections
• Made from heavy ¹/₈ wall cold rolled steel
• Chromed allen head bolts feed into barrel type pre-threaded nuts which are heli-arc welded to clamps
• Pinch bolts are offset to ease installation

V-FACTOR
Chrome Plated Pair
Fits Panhead 1948/1965
Replaces HD# 27063-57
(Imported)

Super Exhaust Port Clamp Cp Ironhead Sportster 1957/Later 1/8" Steel Wall W/Allen Bolts

• Unmatched, super-sealing exhaust port connections
• Made from heavy ¹/₈ wall cold rolled steel
• Chromed allen head bolts feed into barrel type pre-threaded nuts which are heli-arc welded to clamps
• Pinch bolts are offset to ease installation

V-FACTOR
Chrome Plated Pair
Fits Ironhead Sportster 1957/Later
Replaces HD# 65519-52B
(Imported)

V-Twin Manufacturing Muffler Clamps, 80-84 FLT - Set

Chrome muffler clamp set
Sold in a quantity of 2.

Custom application

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra wide.

Width: 1-1/16"

Inner Diameter: 1-7/8"

XL 1957-1985

V-Twin Manufacturing Muffler End Clamp, 85-94 FLT - PR

Stainless inlet clamp is used with 2-3/8" Dumper straight pipes.
Sold in a quantity of 2.
OEM: 65722-85B

Custom application

V-Twin Manufacturing Exhaust Clamp Set Chrome Allen Wide, XL 1957-1985 - Set

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is standard wide.
Sold in a quantity of 2.

XL 1957-

V-Twin Manufacturing 3-1/4" Muffler Body Clamp Set Chrome - PR
Muffler body clamp set for custom mufflers. Sold in a quantity of 2. Fits: FLT 1995-UP UOM: 2 - PR Country of Origin: Imported

V-Twin Manufacturing Muffler End Clamp Kit, 85-94 FLT - Kit

Replica chrome muffler end clamps. These clamps are Replica replacement.

OEM: 65722-85B

FLT 1985-1994

V-Twin Manufacturing x Over Exhaust Pipe Clamp, 1975-80 XL XL - Set

Pipe clamps for crossover exhausts
Sold in a quantity of 2.
OEM: 65412-75

XL 1975-1980

V-Twin Manufacturing Muffler End Clamp, Chrome XL - Sold Each

Stainless steel muffler end clamp has a inner diameter of 1-7/8".

OEM: 65275-57

Custom application

V-Twin Manufacturing 1 3-4" Exhaust COLLAR - Set

Chrome billet exhaust ends fit over 1-3/4" diameter pipes.
Sold in a quantity of 2.

Custom application for 1-3/4" pipes.

V-Twin Manufacturing 2 1-4" Exhaust COLLAR - Set

Chrome billet exhaust ends fit over 2-1/4" diameter pipe.
Sold in a quantity of 2.

Custom application for 2-1/4" pipes.

V-Twin Manufacturing 1" Frame Clamp, 2 Piece - Sold Each

Exhaust clamp is 1" to fit frame for exhaust bracket mountin g.

Custom application for exhaust bracket mouting