Motorcycle Replacement Lenses Gaskets and Hardware

Taillight Lens, Red Cateye For Cateye Assemblies #11201, #11223 Red Plastic

• Available in your choice of the original bulb type or the updated LED (light emitting diode) type
• The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 LEDs for the brake/taillight and 3 LEDs for the license light
• LED lights are not affected by vibration or moisture and have an incredible life span
• The LED lights do not produce any heat and draw only 11.25 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These assemblies include a die cast housing, plastic lens, frosted license plate illumination lens and lead wires
• The flat back housing includes mounting studs on 2 centers

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Replacement red plastic taillight/brake lens
(Imported)

Headlight Parts,Lens Clear Replacement For 6-1/2"Springer Style Headlight #11027
Definitely a modern improvement over headlights used on Springer front ends from 1936/1954. This headlight fills the niche between the classic 7 and the 5 ³/₄ headlights. This new Springer style headlight uses a powerful 12 volt 100/55 watt halogen bulb. Headlight assembly is complete with bulb, adjustable mounting block and all hardware needed for installation.V-FACTOR
Replacement luted Clear Lens
(Imported)

CHRIS PRODUCTS Smoke Turn Signal Lens, Front, Rear, DOT, diameter 3 1/4", Each, Round, specific application, Harley 84-16 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

Mini Bullet Light Lens,Smoked Use With #11448
V-FACTOR
Replacement Smoked Lens
(Imported)

V-Twin Manufacturing Tour Pak Side Marker Lens Kit, Red - Set

Red marker lenses to be attached to the sides of the Tour-Pak.

OEM: 68172-06

FLHTC 2006-UP

CHRIS PRODUCTS Red With Blue Dot Replacement Taillight Lens, Harley 73-98 FX 73-98 FL 73 - 98 XL

• Top-quality replacement lenses and gaskets
• Lenses are available in red or red with blue dot
• Sold each unless noted

CHRIS PRODUCTS Red/Blue Dot Turn Signal Lens, diameter 3 1/4", Rear, Round, Harley 84-16 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Red Turn Signal Lens, DOT, Rear, Round, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Clear Turn Signal Lens, Front, Rear, DOT, Round, specific application, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Amber/Blue Dot Turn Signal Lens, Each, Front, Rear, Round, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

DRAG SPECIALTIES Smoke Tour-Pak Lens Kit, 79-05 Tour-Pak., Harley 85-05 FL

• Replaces the stock red lens exactly
• Includes smoke lenses, eight red bulbs and all necessary installation hardware
• See pages ???-??? for replacement bulbs

DRAG SPECIALTIES Smoked Turn Signal Lens Kit, Bullet, lighted, Harley 02 - 13 VR

• Kits include four lenses and amber bulbs
• Fit OEM housings along with most aftermarket housings

Cateye Lic Illumination Lens Replacement Lens For #11201, #11223 Cateye Taillight

• Available in your choice of the original bulb type or the updated LED (light emitting diode) type
• The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 LEDs for the brake/taillight and 3 LEDs for the license light
• LED lights are not affected by vibration or moisture and have an incredible life span
• The LED lights do not produce any heat and draw only 11.25 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These assemblies include a die cast housing, plastic lens, frosted license plate illumination lens and lead wires
• The flat back housing includes mounting studs on 2 centers

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
rosted replacement license illumination lens
(Imported)

Skull Taillight Lens Red/Clear Skull Cat Eye Taillight With 4-1/2" Mt Holes Red Bulb/Led

• Transform your ordinary cateye taillight into a unique eye catcher with minimal cost
• Inside of lens in faceted to improve light dispersement
• Mounts with existing hardware
• Designed for the standard cateye taillight with lens that mounts on 4 ¹/₂ centers including our 11201, 11219 or 11223
• Must be used with red incandescent bulb or red LED's (except 11778)

V-FACTOR
Plastic Red Lens with White Skull

Taillight Lens, Round Fits Sparto Style Taillight Uw #11246 L.E.D. Taillight

• Provides the bobber look of years gone by
• 11250 and 11262 include license plate bracket for easy mounting of 7 x 4 license plate
• The 12 volt taillights are available with your choice of a standard automotive #1157 incandescent bulb or with 12 individual LED lights
• Made from cast aluminum
• Includes rubber mounting gasket and hardware

V-FACTOR
Replacement faceted style taillight lens

Taillight Lens Oe Style St 00/E03(Ex Fxstd Flsts),Flt, Dyna,Spt 99/E03 Rpls 68140-99A

• Direct replacement for OE style taillight lens
• Includes built-in reflector & mounting gasket
• See the electric section for taillight bulb

V-FACTOR
Fits Softail 2000/Early 2003 (except XSTD & LSTS), FLT, Dyna & Sportster 1999/Early 2003
Replaces HD# 68140-99
(Imported)

Gasket, Taillight Mount Fits MostHarley Mdls 73-98 Dense Foam, Rpls Hd# 68123-73

• Dense foam material, 3/16 thick

V-FACTOR
Dense oam Gasket (sold each)
Fits most models 1973/1998
Replaces HD# 68123-73

Taillight Lens Red Tombstone Big Twin 1974/1954 Plastic Replaces Hd 68090-47T
Available in your choice of the bulb type or the LED (light emitting diode) type. The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb. The LED type uses 45 red LEDs for the brake/taillight and three blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredible life span. The LEDs do not produce any power robbing heat and draw only 4.5 watts of power as opposed to the 29.4 watts of power that the incandescent bulb draws. These 12 volt taillights feature a die cast housing and include a rubber fender gasket. License mount and hardware is also included.

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Replacement Red Taillight Lens
Fits Big Twin 1947/1954 & custom applications
Replaces HD# 68090-47T, (Imported)

V-Twin Manufacturing Red FX Signal Lens, 2000-up Deuce - Set

Red lens set for turn signal

FXSTD 2000-UP

V-Twin Manufacturing Clear Rear Replica Glass Lens, 1935-38 - Kit

Cone style glass lens set for tail lamp with includes gasket . Features a 31.6mm tall red glass with clear inner glass.

OEM: 68092-25

VL 1935-1936
UL 1937-1938

V-Twin Manufacturing Tour Pak Brake Tail Lamp Kit,Red - Set

Red lenses for Tour-Pak brake tail lamp.

OEM: 68172-06

FLHTC 2006-UP

V-Twin Manufacturing Blue DOT Red Plastic Lens Stock Type Taillight, 1955-72 FL-XL - Sold Each

Red with blue dot plastic lens for stock type tail lamp or use as a stock type replacement.

OEM: 68090-69

FL 1955-1972
XL 1955-1972
FX 1971-1972

Tech Note:

Suggested to use with #33-0300 tail lamp
Suggested to use

V-Twin Manufacturing Lens O-Rings 10 pack, 1986-up FL - Pack

Front turn signal lens o-ring

OEM: 68451-86

FLT 1986-UP

CHRIS PRODUCTS Replacement Red Lens For Deuce-Style Turn Signals

• Replacements for OEM and Deuce-style kits shown on previous pages
• DOT compliant
• Sold each

CHRIS PRODUCTS Replacement Clear Lens For Deuce-Style Turn Signals, Front, Rear

• Replacements for OEM and Deuce-style kits shown on previous pages
• DOT compliant
• Sold each

CHRIS PRODUCTS Replacement Amber Lens For Deuce-Style Turn Signals, Front, Rear, made in the usa

• Replacements for OEM and Deuce-style kits shown on previous pages
• DOT compliant
• Sold each

CHRIS PRODUCTS Clear Turn Signal Lens, Front, Rear, DOT, diameter 3 1/4", Round, Harley 84-16 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Amber/Blue Dot Turn Signal Lens, diameter 3 1/4", Round, Harley 84-16 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Red/Blue Dot Turn Signal Lens, diameter 3", Rear, Flat, Round, Harley 71-85 FX 63-85 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Clear Turn Signal Lens, Front, Rear, DOT, Round, specific application, Harley 71-85 FX 63-85 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Red/Blue Dot Turn Signal Lens, Rear, Round, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Amber Turn Signal Lens, Front, Rear, DOT, Each, Round, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.