Rivco Products

RIVCO PRODUCTS Rear cargo rack mount system, Black, made in the usa, Hitch

• An inexpensive, easy to install alternative to a complete trailer hitch and wiring for installing a rack
• Enables use of a RIVCO Quick Detach Rack or Flag Mount
• Vertical black receiver bolts easily to the frame behind the rear fender in minutes
• Tongue slides into the receiver - held in place by a locking hitch pin with two height adjustments
• Rack's chrome receiver bracket bolts directly to the top of the tongue
• Rack and/or tongue can be removed or installed in seconds by removing the pin and tongue from the receiver
• The receiver is finished in black powder-coat and the tongue is triple-chrome-plated (rack not included)

RIVCO PRODUCTS Quick-Detach Trailer Rack, made in the usa, size 11" x 16", Trailer Hitch

• Fits all motorcycles with a trailer hitch
• High-strength aluminum alloy construction
• Accommodates small/medium sized coolers and duffel bags
• Features holes around edge for bungee cords or locks
• Includes chrome bracket to bolt to an existing trailer hitch ball allowing quick attachment or removal of rack and will not interfere with trailer hookup
• Rack is rated at a 35 lb. maximum capacity to maintain handling and cornering performance
• Measures 11" x 16"
• Optional LED taillight set mounts easily to rack; includes quick-release license plate screws
• LED taillight is recommended any time the luggage used on the rack covers any portion of the bike's stock lighting or license plate
• Lighting is a four-wire system; may require the use of a 5-to-4 wire converter

NOTE: Not for use with un-sprung hitches.

RIVCO PRODUCTS Trailer Hitch Wiring Sub-Harness, made in the usa, Trailer Wiring Harness

• Machined aircraft aluminum construction that's incredibly strong with a light weight; weighs only 8 lb.
• Attaches to main frame only; no flimsy sub-frame attachments
• Strength comes from the perfect triangulation of mounting points instead of heavy masses of steel
• Works with ball-type and Heim joint-type couplers
• Each hitch includes mounting hardware and a triple chrome-plated 3" drop tongue (provides 12" tongue height)

WIRING SUB-HARNESS

• Provides plug connection between motorcycle wire harness and optional isolator and/or trailer plug (sold separately)

17/8" TRAILER HITCH BALL

• PART #3902-0118 is made of high-quality steel with a durable nickel finish and features fine threads for superior holding strength; tested to meet U.S. V-5 specifications

UNIVERSAL TRAILER WIRING ISOLATOR

• Protects bike s circuitry from overload while powering trailer
• Supplies full battery power to trailer lighting directly through its own heavy-gauge wiring, relays and fuse
• Compact 1" x 11/2" x 3" housing features peel-and-stick backing and 48" wire leads with plug in connectors

RIVCO PRODUCTS Magnum Electric Horn Hardware Kit, made in the usa, sound level db 118, specific application

• With an output of 118 decibels these electric horns are the loudest on the market, over three times as loud as most stock horns and an economical choice
• Easy bolt-on replacement and electrical hook up for most bikes
• Horns measure 3 x 3 x 3 each
• Plug-and-play wiring with specific mounting hardware kits available for most bikes
• Sets include two horns (one high and one low tone), mounting brackets and installation instructions
• Hardware kits include fuse, 30A relay, all wiring, mounting hardware and instructions; multi-application hardware kit (sold separately) works with most other models

RIVCO PRODUCTS Highway Peg Mounts, Black, Powder-Coated, made in the usa, Steel, Front, Pair, specific application

• Steel base plates finished in satin black powder coat
• Mounts move feet from 12" to 16" forward from foot pegs
• Work with all RIVCO 3/8" pegs (pegs sold separately)

RIVCO PRODUCTS Passenger Armrests, made in the usa, Pair, specific application

• CNC-machined billet armrests with water-resistant padded cushions
• Pivot horizontally and allow easy passenger access
• Designed for maximum passenger comfort, armrests are rated at a 30 lb. working load
• Mounting plates install easily behind backrest pad
• Include L-brackets for mounting Rivco brand cupholders and many other accessories
• Sold in pairs

RIVCO PRODUCTS Sidestand Pad for Honda, Black, Anodized, made in the usa, specific application, Side Stand

• Slides over stock kickstand foot to double the surface area of the foot; no more hauling around a kickstand plate
• CNC-machined billet aluminum construction with black-anodized finish
• Secures with setscrew

NOTE: Not for use with driver floorboards.

RIVCO PRODUCTS Completely Hidden Trailer Hitch, Receiver, Harley 09-13 FL

• Laser-cut from high-tensile strength steel, then formed and TIG-welded by hand for superior fit, strength and reliability
• Vertical receiver hitch features chrome tongue; installs in seconds without tools
• Simple bolt-on installation mounts to bike at five points for superior rigidity
• Plug-in wiring harnesses are available (see page ??)
• Once installed, the black powder-coated main hitch is virtually unseen; only the removable chrome vertical receiver remains visible
• Hitch tongue detaches easily to keep that clean look when not towing a trailer
• Includes hitch and tongue; does not include trailer-hitch ball or wiring
• Made in the U.S.A.

RIVCO PRODUCTS Adjustable Passenger Floorboard Mounts, Chrome, Harley 93-09 FL

• Made from CNC-machined billet aluminum, then triple chrome-plated or black anodized
• Accept either stock Harley-Davidson floorboards or any direct-fit accessory floorboard (floorboards not included)
• The ultimate in passenger comfort; movement of the boards forward eliminates the problem of passenger's calves pressing against the saddlebag/guard rail and greatly increase foot and leg support over stock boards
• Adjusts in seconds to 12 different positions through a 9" range of motion; simply pull out spring-loaded lock pins, then move the board up or down until pin clicks into next position; no tools required
• Made in the U.S.A.

RIVCO PRODUCTS Telescoping Flag Pole, Silver, Anodized, Aluminum, 18", 6'

• Telescoping flag pole extends from 18" to 6 feet tall in seconds
• Uses positive twist-locks in each section
• Collapses small enough to fit in most saddlebags
• The bottom section is 11/4" in diameter and slides snugly into all of Rivco's parade flag holders
• Made from lightweight and strong aircraft aluminum tubing
• Silver anodized finish, quick-release flag mounting clips, topped off with gold-tone finial

RIVCO PRODUCTS Telescoping Flag Pole Flag Holder Socket, Chrome, made in the usa

• Telescoping flag pole extends from 18" to 6 feet tall in seconds
• Uses positive twist-locks in each section
• Collapses small enough to fit in most saddlebags
• The bottom section is 11/4" in diameter and slides snugly into all of Rivco's parade flag holders
• Made from lightweight and strong aircraft aluminum tubing
• Silver anodized finish, quick-release flag mounting clips, topped off with gold-tone finial

RIVCO PRODUCTS Trailer Wiring Sub-Harness, Requires The Use Of PART #3902-0119., Harley 09-13 FL

• Trailer wiring sub-harness plugs into the bike's stock wiring harness on one end, and Rivco's own 5- to 4-wire converter or isolator on the other
• Eliminates the need to cut and splice the stock wiring harness
• Order the sub-harness for your bike based on your bike's plug-in type (see chart)
• All sub-harnesses require two additional parts for a complete trailer wiring harness assembly: Rivco's 5- to 4-wire converter (PART #3902-0134) and Rivco's Universal Trailer Wiring Isolator (PART #3902-0119) (both sold separately)
• Sub-harnesses sold each

RIVCO PRODUCTS Trailer Wiring Sub-Harness, Harley 97-10 FX 97-13 FL

• Trailer wiring sub-harness plugs into the bike's stock wiring harness on one end, and Rivco's own 5- to 4-wire converter or isolator on the other
• Eliminates the need to cut and splice the stock wiring harness
• Order the sub-harness for your bike based on your bike's plug-in type (see chart)
• All sub-harnesses require two additional parts for a complete trailer wiring harness assembly: Rivco's 5- to 4-wire converter (PART #3902-0134) and Rivco's Universal Trailer Wiring Isolator (PART #3902-0119) (both sold separately)
• Sub-harnesses sold each

RIVCO PRODUCTS 4 To 5 Wire Signal Decoder, 5-4 Converter, Plug-and-Play, Sub-Harness, made in the usa, specific application, Harley 14-15 FL

• A must-have for trailers with a 5-wire system; separates the combined CAN-bus signal allowing it to correctly operate lights on trailers
• Features new wiring that combines brake and turn signal functions together on a single wire from a computer module to lights
• A plug-in connection between sub-harness PART #3902-0165 and the trailer wiring isolator
• For use ONLY with Rivco Universal Trailer Wiring Isolator PART #3902-0119 (sold separately; see page ???

RIVCO PRODUCTS Chrome Air Horns, Natural

• Waterproof dual-trumpet air horns replace stock horn and give a loud warning blast of 128 dB
• Trumpets, mounts and brackets are triple-plated chrome or black powder-coated
• Include horn assembly, air compressor, relay, simple wiring, cone-shaped dust/bug covers and complete installation instructions
• Air compressor creates instant air pressure to the horns and mounts either under the seat, behind right side cover or down tube of frame (mounting position varies per model)
• Will fit with Harley-Davidson lowers
• Use the stock horn button; bolt-on, plug-in installation
• Made in the U.S.A.

RIVCO PRODUCTS Black Air Horn, Powder-Coated

• Waterproof dual-trumpet air horns replace stock horn and give a loud warning blast of 128 dB
• Trumpets, mounts and brackets are triple-plated chrome or black powder-coated
• Include horn assembly, air compressor, relay, simple wiring, cone-shaped dust/bug covers and complete installation instructions
• Air compressor creates instant air pressure to the horns and mounts either under the seat, behind right side cover or down tube of frame (mounting position varies per model)
• Will fit with Harley-Davidson lowers
• Use the stock horn button; bolt-on, plug-in installation
• Made in the U.S.A.