Rox Speed Handlebar Risers for Metrics

• 2" center-to-center rise with 11/8" stem
• Pivots backward/forward based on rider preference
• Accepts 11/8" handlebar
• Extended stem on the bottom portion of the riser makes for a great fit for the 14 and newer Yamaha Super Tenere and other bikes with angled handlebar clamps
• Features matte silver or anodized black finish

NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.

• 2" center-to-center rise with 11/8" stem
• Pivots backward/forward based on rider preference
• Accepts 11/8" handlebar
• Extended stem on the bottom portion of the riser makes for a great fit for the 14 and newer Yamaha Super Tenere and other bikes with angled handlebar clamps
• Features matte silver or anodized black finish

NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.

• 2" rise with 11/4" stem
• Accepts 11/4" handlebars
• Pivots forward or backward depending on rider preference
• Works with stock cables
• The risers come with low profile caps to replace the OEM bar clamp caps
• Features clear anodized finish
• Made in the U.S.A.

NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Unique design allows for installation in either direction
• 1" offset means bar can be moved closer or further away, depending on rider preference
• Reducers lock into risers to ensure no slippage between components
• Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center-to-center distance with 8mm bolt threads
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Fit most applications with 7/8" handlebars and a 7/8" bar clamp
• Sleek, stylish design
• Machined from billet 6061 T-6 aluminum
• Anodized clear finish
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Fit models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

• Patented design Pivoting Risers are incredibly universal, with a two-piece design that allows them to be clamped to almost any motorcycle with 7/8" handlebar clamps
• Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment
• 2" rise; for use with 7/8" diameter handlebar
• Out-board positioning also makes them incredibly durable
• Available in black or natural aluminum finish
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Very popular addition for the BMW F800GS, KTM 690 Enduro and 990/1190 Adventure
• Also fits many other street, off-road, and dual sport models with a 11/8" stem clamp and a 11/8" handlebar
• Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position
• Engineered and tested for maximum strength and durability
• CNC-machined from billet 6061 T-6 aluminum, then anodized for long-lasting good looks
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

• Patented design pivoting risers are incredibly universal with a two-piece design that allows them to be clamped to any machine with 7/8" handlebar clamps
• Allow you to clamp a stock 7/8" diameter handlebar, or you can remove the 7/8" reducers and clamp a 11/8" aluminum handlebar; reducers lock into risers to ensure no slippage between components, and serrated teeth provide maximum gripping power on the handlebar
• Risers are held by the original 7/8" clamps and reclamp the handlebars 2", 31/2" or 5" higher (depending on size purchased) with pivoting fore and aft adjustment
• Rox out-board positioning also makes them incredibly durable
• Available in natural aluminum or black finish
• Made in the U.S.A.

NOTE: Longer cables may be required when installing handlebar risers.

• Patented design Pivoting Risers are incredibly universal, with a two-piece design that allows them to be clamped to almost any motorcycle with 7/8" handlebar clamps
• Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment
• 2" rise; for use with 7/8" diameter handlebar
• Out-board positioning also makes them incredibly durable
• Available in black or natural aluminum finish
• Made in the U.S.A.

NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.