Motorcycle Swing Arm Hardware and Parts

V-Twin Manufacturing Rubber Mount Bushing-Swing Arm Rebuild, FLT-FXR, 1987-02 - Sold Each

Swingarm rubber mount bushing

OEM: 47564-86B

FLT 1987-2008
FXR 1987-1994

Swingarm Bolt Repair Kit Big Twin 4Spd 1958/1986(Ex St) Self Tapping W/.050 Os Threads

• Save time and money with this self-tapping swingarm bolt repair kit
• Made in the USA of heat treated, flame hardened, 1045 steel, these bolts will repair damaged threads in your left hand swingarm mount
• These swingarm bolts will restore the stripped out threads without the need of taps, or Heli-coils^™

Stevenson's Cycle
.050 Oversize
Fits Big Twin 4 speed 1958/1986

Swingarm Bolt Repair Kit Big Twin 4Spd 1958/1986(Ex St) Self Tapping W/.025 Os Threads

• Save time and money with this self-tapping swingarm bolt repair kit
• Made in the USA of heat treated, flame hardened, 1045 steel, these bolts will repair damaged threads in your left hand swingarm mount
• These swingarm bolts will restore the stripped out threads without the need of taps, or Heli-coils^™

Stevenson's Cycle
.025 Oversize
Fits Big Twin 4 speed 1958/1986

DRAG SPECIALTIES Swingarm Bearing Kit, Each, Harley 71-86 FX 58-84 FL

• Individual bearing kits that include required bearings, seals, spacers and lock tabs

Rear Fork Stabilizer Bushings Flht,Flhr & Fxr 1980/2001 Improves Handling Mfg#782261

• Made of Delrin, which is a lightweight low friction and wear resistant plastic
• Removes lateral movement of swingarm
• Improves handling and dampening
• Aligns engine transmission unit in frame
• Includes instructions

Sta-Bo
Fits FLHT, FLHR & FXR 1980/2001

Rear Fork Pivot Bearing Spacer Big Twin 4 Spd 58/Early 85 Cp Rpls Hd 47517-58 Mfg 7161C
High quality replacement parts to fit original equipment and our rear forks. HARDWARE
Chrome Plated Pivot Bearing Spacer (2)
Fits Big Twin 4 speed 1958/Early 1985
Replaces HD# 47517-58

Rear Fork Pivot Bolt W/Hex Hd Big Twin 4 Spd 1958/1986 Rpls Hd 475 10-58 Cp Head
High quality replacement parts to fit original equipment and our rear forks. V-FACTOR
Chrome Plated Rear ork Pivot Bolt Hex Head
Fits Big Twin 4 speed 1958/1986 (except Softail)
Replaces HD# 47510-58
(Imported)

V-Twin Manufacturing Swingarm ISO Mount Pin Kit - Kit
Iso mount swingarm pin kit includes pin, and outer support bushings with steel face plates for upgrades. Order front mount damper separately. Fits: FLT 1993-2002 UOM: 1 - KIT Country of Origin: Imported

V-Twin Manufacturing Nylatron Swing Arm Rebuild Bushing Set,1982-02, FLT-FXR - Set

Nylatron swingarm four piece bushing set replaces swingarm bearings and stabilizes swingarm rubber mounts.
Order pin and frame mount bushings separately.

FLT 1982-2002
FXR 1982-1994
FLHT 1982-2002
FLHR 1995-2002

V-Twin Manufacturing Offset Motor Flange Spacer, Billet Aluminum 1 - Sold Each
Related Parts for 1" offset for 51-1948 and 51-1957Motor Spacer

ACCUTRONIX Chrome Ball-Milled Swingarm Pivot Blocks, Harley 82-00 FX 87 - 94 XL

• Black anodized or chrome-plated, CNC-machined T-6 billet aluminum
• Available in smooth or ball-milled design
• Include mounting hardware
• Made in the U.S.A.

ACCUTRONIX Chrome Smooth Swingarm Pivot Blocks, Harley 82-00 FX 87 - 94 XL

• Black anodized or chrome-plated, CNC-machined T-6 billet aluminum
• Available in smooth or ball-milled design
• Include mounting hardware
• Made in the U.S.A.

DRAG SPECIALTIES Swingarm/Wheel Bearing With Race, 3/4" I.D., Harley 71-00 FX 58-99 FL 73 - 99 XL

• Bearings, bushings or races for various H-D models
• Sold as a set or individually
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Swingarm Pivot Bolt Covers, Harley 84-99 FX 86-99 FL

• Die-cast, chromed and securely held in place by a setscrew
• Add a clean look
• Sold in pairs

CUSTOM CYCLE ENGINEERING Swingarm Conversion Retrofit Kit With Pivot Shaft, Harley 84-00 FX 80-01 FL 87 - 94 XL

• Replaces stock Cleve Bloc style swingarm bushings with spherical bearings
• Dramatically changes handling and tracking of Dresser models
• Spherical bearings greatly reduce the stiction at the swingarm pivot, which provides a quicker reaction time to harsh road conditions
• Negates any lateral and torsional movement in the swingarm
• Made in the U.S.A.

CUSTOM CYCLE ENGINEERING Swing Arm Retrofit Kit, Pivot Bearing, Harley 80-01 FL

• Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models
• No need to alter transmission housing
• Will require the purchase of a 02-08 style OEM swingarm with bearings, rear caliper, 1" diameter rear axle and 1" rear wheel bearings
• Made in the U.S.A.

Rear Fork Parts,Pivot Brg/Race Ihd Sportster 1952/Early 1974 Replaces Hd 47550-74
Top quality Rear ork Bearings are sold with one tapered bearing and one outer bearing race as shown. Order amount needed to complete job.Timken
Fits Sportster 1952/Early 1974
Replaces HD# 47550-74

Rear Swingarm Pivot Bearing, Fits 2002/L* Flt,Flht,Flhx 16X Stronger, Hd9208

• Removes lateral movement of swingarm
• Improves handling
• Improves dampening
• 16X stronger than OE swingarm bearing
• Includes instructions

Sta-Bo
Fits FLT, FLHT, & FLHX models 2002/Later
Replaces HD# 9208

Rear Fork Part,Bolt & Washer St 89/99 & St Style Hardbody Frames Replace Hd 4961 & 7142
HARDBODY
Chrome Plated Pivot Bolts & Washers (set)
Fits Softail 1989/1999 & HARDBODY Softail frames
Replaces HD# 4961 & 7142

Rear Fork Part,Bearings+R.Ring St 84/99 & St Style Hardbody Frames Replace Hd.9076 &.11158
HARDBODY
Pivot Bearings (set) & Retaining Rings (set)
Fits Softail 1984/1999 & HARDBODY Softail frames
Replaces HD# 9076 & 11158
(Imported)

Rear Fork Stabilizer Bushings Flht & Flhr 2002/Later* Improves Handling Mfg#782262

• Made of Delrin, which is a lightweight low friction and wear resistant plastic
• Removes lateral movement of swingarm
• Improves handling and dampening
• Aligns engine transmission unit in frame
• Includes instructions

Sta-Bo
Fits FLHT & FLHR 2002/Later

Swingarm Cushion Softail 2000/Later Rpls Hd 11514

• Required replacement cushion to keep the rear fork from slamming into the frame during extreme bumps
• Thread measures ¹/₄-20 x ³/₄

V-FACTOR
Fits Softail 2000/Later
Sold Each, (Imported)
Replaces HD# 11514

Rear Fork Bushing Tool Flt Models 80/01,Fxr Mdls 82/L Rpls Hd 96200-80 .1743

• Removes & installs bushings/cleveblocks
• This tool can be used with a shop press or two wrenches
• This design of the installation cup permits the exact depth to be set without guesswork
• Includes instructions
• Use with our 20105 bushing/cleveblock spreader tool to ease installation of rear fork onto the transmission housing

Jims
Fits FLT models 1980/2001 & FXR models 1982/Later
Replaces HD# 96200-80 1980/2001 & FXR Models 1982/Later

V-Twin Manufacturing Chrome Pivot Mount End Caps 2007-08 - Set

Rear frame fork bracket set has a chrome finish and includes both the left and right side bracket. Brackets have peg mou nt holes.

OEM: 50588-07

FLT 2007-2008

V-Twin Manufacturing Swingarm Pivot Mount End Caps Chrome fits 1982-2006 - PR
Swingarm Pivot Mount End Caps Chrome OEM No: 50588-93 Chrome left and right pivot mount end caps with footpeg mount holes. Fits Harley-Davidson models: FLT 1982-1984 FLT 1985-2006 UOM: 2 - PR Coun

V-Twin Manufacturing Billet Axle Covers For WG Frames, FXST - Set

Billet axle cover set for Wide Glide frames.

Custom application for Chopper and Softail frames

Tech Note:

Suggested to use with #51-2189, #51-2196, #51-2188 frames.