Switch Housings

Handlebar Switch Housing Lh/Rh Bt Spt 82/95 (Ex Radio Control Rpls Hd 71563-82 71568-82 Cp
V-FACTOR
Chrome Plated Right & Left Side Switch Housing Assembly
Includes button head mounting hardware with allen wrench and right hand assembly includes the thumb screw throttle lock assembly
Fits Big Twin & Sportster 1982/1995 (except models with radio controls)
(Imported)

Switch Housing,Handlebar Cp Fl 72/81 Fx Spt 73/81 Vertical Rpls Hd 71539-73B & 71519-75

• Accepts the OE or our control switches located in the electric section
• Allen head screws are included for mounting

V-FACTOR
Chrome Plated Vertical Switch Housing
Fits L 1972/1981, X & Sportster 1973/1981
Replaces HD# 71539-73B & 71519-75
(Imported)

V-Twin Manufacturing Switch Cover Set, Chrome, FLHTCUI, FLTRI; 1998-up - Set

Chrome switch cover set is easily installed and does not require any rewiring. Set of snap on chrome covers replace existing black switch covers.

OEM: 71802-03

FLHTCU 1996-UP
FLHTCUTG 1996-UP
FLHTK 1996-UP
FLTR 1996-UP
FLTRU 1

V-Twin Manufacturing Handlebar Switch Housing Set Chrome - Set
Handlebar Switch Housing Set Chrome Chrome switch housing sets will accept your stock switches. The switch housings accept screw in thottle and idle cables. Four piece set. Fits Harley-Davidson models: FXR 1982-1994 XL

PINGEL Polished Slim Line Switches With Housing, clamping diameter 1 1/4"

• Made from billet aluminum
• Polished finish
• Two-piece housing design for easy installation
• Allow for internal or external handlebar wiring
• Only 7/16" thick
• Momentary push-button switches are rated for 1/2 amp
• Switch can be used to send a low amperage signal or can activate a relay for higher amperage rated accessories
• Made in the U.S.A.

PINGEL Polished Slim Line Switches With Housing

• Made from billet aluminum
• Polished finish
• Two-piece housing design for easy installation
• Allow for internal or external handlebar wiring
• Only 7/16" thick
• Momentary push-button switches are rated for 1/2 amp
• Switch can be used to send a low amperage signal or can activate a relay for higher amperage rated accessories
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Chrome Contour Switch Housing, Natural, number of buttons 5

• Designed for use with PM Contour controls
• Replaces OEM switch housing on 96-13 Touring models
• Available for brake and hydraulic or cable clutch in four- or five-button configurations
• Available in chrome or black anodized
• Utilizes the OEM stereo and cruise control switches for a simple install and ease of use
• Sold each
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Chrome Contour Switch Housing, Natural, number of buttons 4, Right

• Designed for use with PM Contour controls
• Replaces OEM switch housing on 96-13 Touring models
• Available for brake and hydraulic or cable clutch in four- or five-button configurations
• Available in chrome or black anodized
• Utilizes the OEM stereo and cruise control switches for a simple install and ease of use
• Sold each
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Chrome Contour Switch Housing, Natural, number of buttons 4

• Designed for use with PM Contour controls
• Replaces OEM switch housing on 96-13 Touring models
• Available for brake and hydraulic or cable clutch in four- or five-button configurations
• Available in chrome or black anodized
• Utilizes the OEM stereo and cruise control switches for a simple install and ease of use
• Sold each
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Chrome Contour Billet Handlebar Switches, clamping diameter 1", Natural, made in the usa, Aluminum, number of buttons 3, Each, Right

• 3-button housing includes high-quality switches with 36" leads
• Retains blinkers, horn and high-beam switches
• Work exclusively with Performance Machine Contour hand controls
• Sold each
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Black Contour Billet Handlebar Switches, clamping diameter 1", Anodized, made in the usa, Aluminum, number of buttons 3, Each, Right

• 3-button housing includes high-quality switches with 36" leads
• Retains blinkers, horn and high-beam switches
• Work exclusively with Performance Machine Contour hand controls
• Sold each
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Switch Housing Kit, Cruise, Radio, number of buttons 10, Harley 14-16 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Upper Right Radiused Switch Housing, Start, Stop, number of buttons 2, Harley 96-11 FX 96-15 FL 96 - 03 XL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Upper Left Radiused Switch Housing, Dimmer, Horn, number of buttons 2, Harley 96-11 FX 96-15 FL 96 - 03 XL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Lower Right Radiused Switch Housing, Turn Signal, number of buttons 1, Harley 96-11 FX 96-10 FL 96 - 03 XL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Lower Right Radiused Switch Housing, Radio, Turn Signal, number of buttons 2, Harley 08-13 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Lower Right Radiused Switch Housing, Cruise, Radio, Turn Signal, number of buttons 3, Harley 96-07 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Lower Right Radiused Switch Housing, Cruise, Radio, Turn Signal, number of buttons 3, Harley 08-13 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Lower Left Switch Housing For Radiused Switch Housing Kit, Turn Signal, number of buttons 1, Harley 11-16 FX 11-16 FL 14 - 16 XL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Lower Left Radiused Switch Housing, Turn Signal, number of buttons 1, Harley 96-11 FX 96-10 FL 96 - 03 XL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Replacement Lower Left Radiused Switch Housing, Radio, Turn Signal, number of buttons 2, Harley 95-13 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Radiused Switch Housing Kit, Dimmer, Horn, Start, Stop, Turn Signal, number of buttons 6, Harley 96-11 FX 96-10 FL 96 - 03 XL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Radiused Switch Housing Kit, Dimmer, Horn, Radio, Start, Stop, Turn Signal, number of buttons 8, Harley 96-07 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Radiused Switch Housing Kit, Cruise, Dimmer, Horn, Radio, Start, Stop, Turn Signal, number of buttons 10, Harley 96-07 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

DRAG SPECIALTIES Chrome Radiused Switch Housing Kit, Cruise, Dimmer, Horn, Radio, Start, Stop, Turn Signal, number of buttons 10, Harley 08-13 FL

• Die-cast aluminum construction with a chrome finish
• Accept OEM-style switches and wiring (sold separately)
• Replacement components are also available

Switch Housing,Hb Rh Chrome Bt,Vsrc,Spt 96/06 W/O Switches Rpls Hd 71564-96 & 71563-96
V-FACTOR
Chrome Plated Right Side Switch Housing Assembly
Includes button head mounting hardware and the thumb screw throttle lock assembly
Fits Big Twin, V-Rod & Sportster 1996/2006 (except models with radio controls)

Handlebar Switch Housing Lh Cp Bt Spt 82/95 (Ex Radio Control Rpls Hd 71567-82,71568-82A
V-FACTOR
Chrome Plated Left Side Switch Housing Assembly
Includes button head mounting hardware with allen wrench
Fits Big Twin & Sportster 1982/1995 (except models with radio controls)
(Imported)

Handlebar Switch Housing Kit Flht 96/13,Flhx 06/13 Rpls. Hd 70223-96B Chrome
V-FACTOR
Chrome Plated Kit
Fits 1996/Later Touring Models with radio controls
Replaces HD# 70223-96B

Turn Signal Button Extensions Bt Spt & V-Rod 1996/Later* Chrome Plastic

• Simple peel and stick installation
• Makes your turn signal buttons easier to reach
• No disassembly required
• Installs in minutes

Thumbnail^®
Chrome Extension Pair
Fits Big Twin & Sportster 1996/Later, V-Rod 2002/Later

Turn Signal Button Extensions Bt Spt & V-Rod 1996/Later* Black Plastic

• Simple peel and stick installation
• Makes your turn signal buttons easier to reach
• No disassembly required
• Installs in minutes

Thumbnail^®
Black Extension Pair
Fits Big Twin & Sportster 1996/Later, V-Rod 2002/Later