Vintage Vintage Grips and Related

V-Twin Manufacturing Waffle Grips, Black, 1974-up 1 and 1 1-8 - Set

Replica black waffle grips are soft rubber and have a 1-1/8" inner diameter on the throttle grip and 1" on the left grip
Sold in a quanity of 2.

FL 1974-1984
FX 1974-1984
XL 1974-UP
FXST 1984-UP
FLST 1986-UP
FXR 1982-1994
FX

V-Twin Manufacturing Hand Grip Hole Plugs, Chrome, 1962-up XL - Pack

Use these chrome plugs in your stock handlebar grips to seal off the end of the handlebar to help prevent moisture from entering the handlebars.

OEM: 56238-62

FL 1960-1980
FX 1974-1980
XL 1974-1980

V-Twin Manufacturing Vintage Style Handlebar Grip Set, 1909-1919, 3310-09 - PR
OEM No: 3310-09 Grey grip set replaces the 1909 version for restoration. Grips have an inner diameter of 1-1/8" on both sides. Sold in a quanity of 2. Fits: Harley Davidson models F 1909-1919 J 1920-1929 VL 1930-19

V-Twin Manufacturing Black Waffle Grips 1-1/8in w-o Plug Hole, 1949-72 - Set

Replica black waffle grips are soft plastic without plug hole,and have a 1-1/8" inner diameter.
Sold in a quanity of 2.

FL 1949-1972
WL 1949-1952

V-Twin Manufacturing Waffle Grips, White, 1974-up 1 and 1 1-8 - PR

Replica white waffle grips are soft plastic and have a 1-1/8" inner diameter on the throttle grip and 1" on the left grip. Grips have a plug hole.
Sold in a quanity of 2.

FL 1974-1984
FX 1974-1984
XL 1974-UP
FXST 1984-UP
FLST 1986

V-Twin Manufacturing Replica Grip Set, White w-Rib, 1962-65 - Set

Replica white rib grip set is 1-1/8" ID and fits stock controls. Plastic construction.
Sold in a quanity of 2.
OEM: 56201-62

FL 1962-1965
XL 1962-1965

V-Twin Manufacturing Replica Grip Set, Black w-Rib, 1962-65 - Set

Replica black rib grip set is 1-1/8" inner diameter to fit stock controls. Grip set features plastic construction.
Sold in a quanity of 2.
OEM: 56205-62

FL 1962-1965
XL 1963-1965

V-Twin Manufacturing White Waffle Grips 1-1/8in, 1949-72 - Set

Replica white waffle grips are soft plastic with 1-1/8" inner diameter on both sides to fit internal throttle control.
Sold in a quanity of 2.
OEM: 56212-53

FL 1949-1972
WL 1949-1952

V-Twin Manufacturing Black Waffle Grips 1-1/8in w-Plug Hole, 1949-72 - Set

Replica black waffle grips are soft plastic with plug hole and are 1-1/8" inner diameter.
Sold in a quanity of 2.
OEM: 56212-53

FL 1949-1972
WL 1949-1952

Measurements:

Overall Length: 4"

V-Twin Manufacturing Replica Red Grip Set - Set

Red grip set replaces the 1909 version for restoration.
These grips are made of a soft rubber compound and designed with a retro style look for 1-1/8" twist grip assemblies. Sold in a quanity of 2. Vintage Grip sets from 1909 to 1914 were grey, 1915

V-Twin Manufacturing Replica White Grip Set - Set

White grip set replaces the 1909 version for restoration. Grips have an inner diameter of 1-1/8" on both sides.
Sold in a quanity of 2. Vintage Grip sets from 1909 to 1914 were grey, 1915 to 1933 were black, 1934 to 1942 were white, 1943 and up were

V-Twin Manufacturing Replica Long Grip Set, Black - Set

Black grip set replaces the 1909 version for restoration. Grips have an inner diameter of 1-1/8" on both sides.
Sold in a quanity of 2. Vintage Grip sets from 1909 to 1914 were grey, 1915 to 1933 were black, 1934 to 1942 were white, 1943 and up were

V-Twin Manufacturing Replica Short Stock Grip Set, White - Set

Replica rubber white short grips are for stock controls.
Sold in a quanity of 2. Vintage Grip sets from 1909 to 1914 were grey, 1915 to 1933 were black, 1934 to 1942 were white, 1943 and up were black. Red was available as an accessory from 1909 to

V-Twin Manufacturing Replica Grip Set, Black - Set

Replica black rubber short grips for stock controls.
Sold in a quanity of 2. Vintage Grip sets from 1909 to 1914 were grey, 1915 to 1933 were black, 1934 to 1942 were white, 1943 and up were black. Red was available as an accessory from 1909 to 1934

V-Twin Manufacturing Replica 65-73FL Bar w-Switch Holes - Set

Replica early glide bar is a two piece type with a 1.15" dia meter left side end and a .83" diameter right side end for internals.

OEM: 56070-65

FL 1965-1973
FLH 1965-1973

Measurements:

Rise To Grip Tip: 2"
Rise To Center:

V-Twin Manufacturing Replica Handle Glide Bars St, 1949-53 - Sold Each

Replica 1" handlebar has a one piece design with a reinforced center

OEM: 56049-49

FL 1949-1953

Measurements:

Rise To Grip Tip: 3"
Rise To Center: 4"
Pull Back: 4"
Width Tip To Tip: 32"
Bar Diameter: 1"

V-Twin Manufacturing Handlebar Set, Chrome, 2 Piece, 1960-78 FL - Set

This chrome handlebar is a two piece set.
They are knurled to fit the stock riser on a 1960-1978 FL. The 1" diameter on both ends enables a snap throttle to be used.
OEM: 56044-75

FL 1960-1981
FX 1971-1981
XL 1957-1981

Measurements

V-Twin Manufacturing Replica Glide Bars, Chrome, 2 Piece, 1960-64 - Set
OEM No: 56054-60 Replica 1" chrome handlebar accepts throttle right and left spark spirals. Fits: FL 1960-1964 UOM: 2 - PR Country of Origin: Imported

V-Twin Manufacturing Replica Glide Bars, Chrome, 1 Piece, 1954-1959 - Sold Each

Replica 1" chrome handlebar is 1 piece with reinforced center. Both sides accept spiral controls.

OEM: 56049-54

FL 1949-1959

Measurements:

Rise To Grip Tip: 3"
Rise To Center: 4"
Pull Back: 7"
Width Tip To Tip: 4"

V-Twin Manufacturing Complete Handlebar Assembly, 1949-53 - Kit

Assembly with push throttle, spark, switches. This 1" handlebar is a 1 piece design with a reinforced center.
Includes glide handlebars, throttle spirals and cable kit, handlebar grip hole plugs, waffle style grip set, horn switch button, and a dimm