All

Center valve inner tube with metal stem is for 2.15 to 2.75 rims. 0-Front

Black diamond exhaust valve Special conversion valve used to convert 883 cylinder heads to 1200cc. Valve has 883 stem length but 1200 head diameter for increased flow.

Black diamond exhaust valve

Black diamond exhaust valve.

Black diamond intake valve Special conversion valve used to convert 883 cylinder heads to 1200cc. Valve has 883 stem length but 1200 head diameter for increased flow.

Black diamond intake valve

Black diamond intake valve.

1200cc XL Conversion cylinder and piston set includes 2 black finished with milled edge fin cylinders with fitted Wiseco moly 9.5:1 reverse dome piston and ring set. Order head base gasket set separately. 1986-2003 XL

1200cc Piston Set .040 Oversize

12V BOSCH TYPE REGULATOR, BLACK

Black 1-1/4 round ape style handlebar has holes for internal wiring. Features set back to accommodate fairing and accepts throttle by wire right side grip. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2013 FLT

Chrome 1 handlebar with 13 rise to indented to accept internal wiring with a 2 knurled center spacing. Handlebar is notched for throttle by wire applications. Handlebar rubber bushings 4 pieces included. 1980-UP XL 1984-2017 FXST 1980-UP FLT

Chrome 1 handlebar with 13 rise has slots for internal and external wiring. Features right side knotches for throttle by wire application and 2 knurl spacing. 1982-UP FLT 1982-UP FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-UP FXR 1991-2017 FXD

1985-UP FLHT 1985-UP FLHR 1985-UP FLHX 1985-UP FLTR

13 FLT stock shock set features a black finish. **Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming especially over bumps or in turns. 1995-UP FLHR 1995-UP FLHT 1995-UP FLT 1919-UP FLTR 1995-UP FLHX

13 FLT stock shock set features a chrome finish. **Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming especially over bumps or in turns. 1995-UP FLHR 1995-UP FLT 1995-UP FLHT 1995-UP FLTR 1995-UP FLHX

Chrome 13 sissy bar is constructed of 5/8 round solid stock featuring the original poor boy style. The side plates are the non-detachable type. The rear wheel must be removed for installation. The top is screwed to the side plates by 2 allen screws on each side. *NOTE: Bar height is measured from the first bend to top. 1986-2003 XL

Chrome 13 sissy bar is constructed of 5/8 round solid stock featuring the original poor boy style for rigid side plates on 2004-up XL models. These side plates are the non-detachable type. The Rear wheel must be removed for installation. The top is screwed to the side plates by 2 allen screws on each side. *NOTE: Bar height is measured from the first bend to top. 2004-UP XL 1957-1978 XL 2002-2005 FXD

Chrome 13 sissy bar kit includes a 13 round solid bar and non-detachable side plates. The side plates are the non-detachable type. The rear wheel must be removed for installation. The top is screwed to the side plates by 2 allen screws on each side. Mount to fender strut holes measure 7-5/8 center to center. *NOTE: Bar height is measured from the first bend to top. 1994-2003 XL

Chrome 13 sissy bar kit includes a 13 round solid sissy bar detachable side plates and a luggage rack mounting kit. The rear wheel must be removed for installtion. The top is screwed to the side plates by 2 allen screws on each side. Center to center between the front and rear mounting holes on the side plates measures 7-1/2 . *NOTE: Bar height is measure from the first bend to the top. 2004-UP XL

Center valve inner tube with metal stem For use on 130/80 x 17 rear tires. 0-Rear

Domed piston set is .020 oversize and for a 3-1/2 bore. Piston set has a compression of 8.5:1 and includes rings circlips and piston pins. **Note:Run engine at moderate speeds for at least 500 miles avoiding excessive running in lower gears in order to properly break-in new pistons and rings.

Black 1 handlebar are made from heavy steel tubing with 2 knurl spacing. Handlebars are indented with holes for clips. These have drilled holes for wire loom clips not for internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

Ape style Z handlebar has a 1-1/4 bar diameter and features a black finish. Handlebars require 1-1/4 diameter riser clamps which can be purchased separately. *NOTE: Will not fit FLHT or FLHX models. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1999-2013 FLTR 1999-2018 FLHR

Ape style Z handlebar has a 1-1/4 bar diameter and features a chrome finish. Handlebars require 1-1/4 diameter riser clamps which can be purchased separately. *NOTE: Will not fit FLHT or FLHX models. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1999-2013 FLTR 1999-2018 FLHR

1-1/4 black handlebar with 14 rise. These bars are drilled with a copper wire inside for pulling thru internal wiring and is notched for throttle by wire application. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1985-UP XL 1986-2017 FLST 1984-2017 FXST 1991-2017 FXD 1984-1994 FXR

Black 1-1/4 handlebar has a 14 rise with indents for external wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

Chrome 1-1/4 handlebar with a 14 rise to center is indented to accept internal wiring with a 3 knurled center spacing. Handlebar is notched for throttle by wire applications. ChiZeled bar replaces welded and mitered corners with cast seamless 90° bends for added strength and style. The cast elbows features removable plugs to simplify internal wiring and eliminates sharp internal bends. The full 1-1/4 diameter at the clamping area is for use with 2015-up FLTR Roadglide models and features a front oval wire hole. The front exit hole is used to wire full 1-1/4 tubes at the rise
25-0181" Chrome 1-1/4 handlebar with a 12 rise to center is indented to accept internal wiring with a 3 knurled center spacing. Handlebar is notched for throttle by wire applications. ChiZeled bar replaces welded and mitered corners with cast seamless 90° bends for added strength and style. The cast elbows features removable plugs to simplify internal wiring and eliminates sharp internal bends. The 1-1/4 diameter at the clamping area is for use with 2015-up FLTR Roadglide models and features a front oval wire hole. The front exit hole is used to wire full 1-1/4 tubes at the riser cla
25-0182" Chrome 1-1/4 handlebar with a 16 rise to center is indented to accept internal wiring with a 3 knurled center spacing. Handlebar is notched for throttle by wire applications. 2015-UP FLTR

1-1/4 chrome handlebar with 14 rise. These bars are drilled with a copper wire inside for pulling thru internal wiring and is notched for throttle by wire application. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1985-UP XL 1986-2017 FLST 1984-2017 FXST 1991-2017 FXD 1984-1994 FXR

1-1/4 black handlebar with 14 rise and throttle by wire right side notches. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2013 FLT 2008-2013 FLHT 2008-2013 FLHTC 2008-2013 FLHTX

1-1/4 black handlebar with 14 rise and indents internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-2007 FLT 1982-2007 FLHT 1982-2007 FLHTC 1982-2007 FLHTX

14 Multi-bar features a chrome finish with a unique built in riser mount bolt that mount directly to the bushings in the triple tree so that no risers are required. Includes saddles for secure mounting at the bolt area. Bolts are included. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1980-1983 FLT 1984-2013 FLT

14 Multi-bar features a black finish with a unique built in riser mount bolt that mount directly to the bushings in the triple tree so that no risers are required. Includes saddles for secure mounting at the bolt area. Bolts are included. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1980-1983 FLT 1984-2013 FLT

2015-UP FLTR