Drag Specialties

CYCLE VISIONS Chrome Attitude Sissy Bar Stick, Universal, bar width 6 11/16", Natural, height 18", 6.88" To 7.626" (Narrow)

• Attitude-style sissy bar sticks are made from 9/16" round cold-rolled steel
• Crosstude and Daggertude styles are made from 9/16" square steel bar
• Available in two sizes: approximately 18" or 30" tall
• Available with chrome or black powder-coated finish
• Side plates must be purchased separately
• Made in the U.S.A.

CYCLE VISIONS Chrome Attitude Sissy Bar Stick, Universal, bar width 8 3/4", Natural, height 18"

• Attitude-style sissy bar sticks are made from 9/16" round cold-rolled steel
• Crosstude and Daggertude styles are made from 9/16" square steel bar
• Available in two sizes: approximately 18" or 30" tall
• Available with chrome or black powder-coated finish
• Side plates must be purchased separately
• Made in the U.S.A.

DRAG SPECIALTIES SEATS Smooth Fender Skin, 12" L x 5-1/2" W, Black, Harley 97-16 FL

• Feature faux exotic centers with leather perimeters and a finished edge
• Felt liner to protect paint
• Include black zinc washer and screw to complete installation
• Hugs fender perfectly
• Designed to match Drag Specialties solo seats
• Will work with most OEM and accessory seats
• Made in the U.S.A.

Fender Skin - Embossed Faux Gator Leather Center

• Feature faux exotic centers with leather perimeters and a finished edge
• Felt liner to protect paint
• Include black zinc washer and screw to complete installation
• Hugs fender perfectly
• Designed to match Drag Specialties solo seats
• Will work with most OEM and accessory seats
• Made in the U.S.A.

2016-2017	Harley-Davidson	Low Rider S FXDLS
2012-2016	Harley-Davidson	Switchback FLD
2008-2017	Harley-Davidson	Fat Bob FXDF
2007-2009, 2015-2017	Harley-Davidson	Low Rider EFI FXDL
2006-2017	Harley-Davidson	Street Bob FXDB
2006-2014	Harley-Davidson	Super Glide Custom EFI FXDCI
2006-2010	Harley-Davidson	Super Glide EFI FXDI
2006-2008, 2010-2017	Harley-Davidson	Wide Glide EFI FXDWGI
2006	Harley-Davidson	Super Glide FXD35

MUSTANG Plain Fender Bib For Solo Seat, Black, Harley 97-16 FL

• Complement your solo seat with these unique fender bibs
• Hook-and-loop and screw attachment utilize stock fender mounts
• Premium expanded black vinyl construction with braided edging
• Felt-backed to protect paint
• Available with or without chrome studs
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Rebuild Kit For 112-6B Caliper, Front
PERFORMANCE MACHINE (PM) Rebuild Kit For 112-6B Caliper, Front

GOODRIDGE Ebony Universal Brake Line Fitting, Inverted Flare, Male, Short, Black, Zinc-plated, 1/8" NPT, AN #3
GOODRIDGE Ebony Universal Brake Line Fitting, Inverted Flare, Male, Short, Black, Zinc-plated, 1/8" NPT, AN #3

• Custom rear chrome finish signal lights
• Wiring length has been increased to 42"
• DOT compliant
• Sold Each
  

TODD'S CYCLE Black/Red Martini Rear Turn Signals Or Taillights, Gloss

• Dual Function
• LED design
• Housing made with billet aluminum
• Available in chrome or gloss black finish with 1.5" length and 1.25" diameter
• Sold in pairs
• Made in the U.S.A.

CHRIS PRODUCTS Red With Blue Dot Replacement Taillight Lens, Harley 73-98 FX 73-98 FL 73 - 98 XL

• Top-quality replacement lenses and gaskets
• Lenses are available in red or red with blue dot
• Sold each unless noted

CHRIS PRODUCTS Red/Blue Dot Turn Signal Lens, diameter 3 1/4", Rear, Round, Harley 84-16 FL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Clear Turn Signal Lens, Front, Rear, DOT, Round, specific application, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Amber/Blue Dot Turn Signal Lens, Each, Front, Rear, Round, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

CHRIS PRODUCTS Red Turn Signal Lens, DOT, Rear, Round, Harley 86-01 FX 90-01 FL 86 - 01 XL

• Replacement turn signal lenses fit Harley models
• Made in accordance with all DOT requirements; available with or without blue dot reflector installed
• DOT compliant except blue dot versions
• Made in the U.S.A.

BADLANDS Plug-In Automatic Turn Signal Canceler, Harley 91-93 FX 87-93 FL 90 - 93 XL

• Plug in and replace the OEM signal canceler
• Do not require stock speedometer for proper operation
• Automatically flashes for 11 seconds; can be manually canceled at any time
• Built-in emergency flasher mode
• Built-in load equalizer runs LEDs of up to 100W per side
• Measure 27/8" L x 13/8" W x 7/8" D
• Made in the U.S.A.

BADLANDS Illuminator Pro III Harley, Fits Custom Applications Without Self Cancelling Turn Signals., Hardwire Design., made in the usa, Each, specific application, 12V, Harley 73-90 FX 73-90 FL 73 - 90 XL

• Built-in flasher, self-canceller and load equalizer
• Controls run, brake and turn lights in rear
• Controls run and turn lights in front
• New turn indicator feeds for dash
• Protected against shorts
• 10A per station
• Works with any LED halogen or incandescent bulbs and any 12V system

CYCLE VISIONS Headlight Isolator Mounts, made in the usa, 3-Pack, size 1/4", specific application, Harley 00-07 FX

• Replacement rubber insulators feature 1/4"-20 studs
• Reduce the shock and stress on the headlight, resulting in longer life
• Sold in 3-pack

HEADWINDS Black Offset Headlight Mounting Block, Each

• Precision-machined T-6 billet aluminum with a chrome or black finish
• Blocks are machined 3/4" wide to fit most headlights and spotlights
• Made in the U.S.A.

KLOCK WERKS The One Rear Fender License Plate Frame, Chrome

• An all steel option for those Bagger owners that want that seamless one piece rear end look
• Stamped 14 gauge steel construction with integrated bag-to-fender filler panels
• The same deep draw stamping quality as the rest of the Klock Werks sheet metal line
• Filler panels are 100% TIG welded to fender
• Filler panels mate up to rear top strut covers perfectly
• Dual exhaust cut outs in the bottoms of the fillers mate up to extended bags and bag extensions offered in the aftermarket
• 8.625" wide with 4" stretch
• Look equally as good without extended bags
• Available in Smooth of Frenched version with a Frenched license plate pocket (for use with Klock Werks License plate frames PART #S 2030-0247, 2030-0248, 2030-0803, 2030-0804)
• Accept all stock detachable mounting hardware/brackets and come, with or without, pre-drilled blinker holes
• Made in the U.S.A.

CYCLE VISIONS Chrome Beveled License Plate Frame, Natural

• Aluminum construction
• Blind-hole design for a clean line
• Available with chrome or black powder-coat finish
• Available with or without plate lights
• Fits all 4" x 7" license plates
• Made in the U.S.A.

GOODRIDGE Fuel-Injection Line, Harley 95-99 FL

• Upgrade over the stock kit
• Flex lines are clear or black PVC coated stainless steel braided
• Chrome steel hard line and fittings
• All components are resistant to all chemicals found in gasoline

PAUL YAFFE BAGGER NATION Talon Front Fender, rim wheel size 21", Harley 86-13 FL

• Radically styled, aggressive front fender with a swooping claw-like shape
• 14-gauge steel construction with a raw finish
• Pre-drilled for installation
• E-coated finish
• Satin-finish fender spacers included
• Made in the U.S.A.

CUSTOM CYCLE ENGINEERING Narrow-To-Wide Glide Wheel Conversion Kit, Harley 00-03 FX 00 - 06 XL

• Original Randy Smith design
• Allow the use of narrow glide 19" or 21" wheel (found on FX, FXR, FXD and XL models) to be installed in a 41mm Wide Glide front-end
• Include aluminum disc spacer (second spacer for dual disc available), socket head screws, axle spacer and 3/4" axle
• Spacer and axle are cadmium-plated; disc spacer is chrome-plated
• Made in the U.S.A.

PRO-ONE PERF.MFG. Hard Chrome 41mm Fork Tube Assembly, length 28.25", Harley 85-99 FX 84-99 FL

• Assemblies come complete with fork tubes, springs, damping rods, bushings, clips, seals, slider tube caps, fork tube plugs and O-rings
• Available in a wide range of lengths for virtually any custom application
• Sold in pairs

PROGRESSIVE SUSPENSION Fork Lowering Kit, Harley 80-10 FX 78-15 FL

• Kits utilize Progressive Suspension's experience and knowledge to provide exact model applications
• Progressively wound for more comfort and control over a variety of road surfaces
• Lower forks up to 1"
• Kits come complete with springs, spacers and installation instructions
• Made in the U.S.A.

ACCUTRONIX Chrome "Hot Legs"/"Bagger Legs" Fender Spacers, rim wheel size 23", width 1", Harley 80-13 FL

• Designed to be used with Arlen Ness "Hot Legs" lower legs, American Suspension "Bagger Legs" lower legs or stock lower legs
• For 63/8" wide fenders use .4375" spacers for 14-16 applications or .8125" spacers for 84-13 applications
• For 6" wide fenders use .625" spacers for 14-16 applications or 1.00" spacers for 84-13 applications
• For 51/2" wide fenders use .875" spacers for 14-16 applications or .8125" spacers for 84-13 applications
• Sold in pairs
• Made in the U.S.A.

KLOCK WERKS Chrome Tire Hugger Front Fender Mounting Blocks, rim wheel size 16"-18", Harley 86-15 FL

• Use with Klock Werks' front fenders, or they can also be used for a variety of custom applications
• Machined from billet aluminum and are available in a chrome or raw finish
• The spacers for the 14-16 models measure 4" long x 11/8" tall with 3 1/4" o.c. fork leg mount holes and 3" o.c. fender mount holes (5/16)"
• 84-13 FLT/FLHT spacers measure 5/8" tall by 3 5/8" long and have 3" on-center holes; spacers for 21" tires are 1" wide; spacers for 16"/18" tires are 7/8" wide
• FLST spacers measure 5/8" tall by 3" long and have 2 3/4" on-center holes; spacers for 21" tires are 3/8" wide; spacers for 16"/18" tires are 1/8" wide
• FXST/FXDWG spacers measure 5/8" tall by 3" long and have 2 3/4" on-center holes; spacers for 21" tires are 1/2" wide; spacers for 16"/18" tires are 1/4" wide
• FXST/FXDWG Skinny 21" fender spacers measure 5/8" tall by 3" long and have 2 3/4" on-center holes and are 1 1/4" wide
• All are sold in pairs
• Made in the U.S.A.

SADDLEMEN Fender Bra Set Tattoo, Harley 09-15 FL

• Bra set features SaddleHyde top with a soft under-liner prevents road debris and your passenger's boots from damaging the paint
• For a custom look, select the fender bra set embroidered with Saddlemen's black Tattoo flame design
• PART #1414-0015 is designed to match Saddlemen's Tour-Pak Lid Chap Set
• Sold in pairs

ARLEN NESS Black Deep Cut Solo Shift Lever, Anodized, Harley 84-16 FX 84-16 FL

• Solo shift levers are CNC machined from billet aluminum
• Adds clean style to your foot control section
• Made in the U.S.A.

PERFORMANCE MACHINE (PM) Contour Footpegs Replacement Rubber

• Designed to match Performance Machine Contour grips
• Rubber-wrapped or rubber-insert styles
• Male-mount design fits most H-D applications
• Available in black anodized or chrome finish
• Replacement rubber and chrome hardware upgrade available separately
• Footpegs sold in pairs; shifter pegs sold each
• Made in the U.S.A.

EDDIE TROTTA DESIGNS Chrome Driver Floorboards, Harley 84-15 FL

• CNC-machined from 6061 billet aluminum
• Feature reverse-cut design with a raised, diamond-cut center for increased traction
• Available with chrome or black anodized finish
• Made in the U.S.A.

PINGEL Black Driver Floorboard Extender Kit, Harley 14-15 FL

• Kits for Dressers move the floorboards outward 11/4"
• Provide greater comfort by moving the legs away from the gas tank and engine heat
• Work well with oversized primary covers
• Kit is easy-to-install using included hardware
• Billet aluminum with a black finish or polished finish
• Compatible with fairing lowers, but not with centerstand
• Made in the U.S.A.