Drag Specialties

Filter

Filter

Brand

clear
54 products

54 products

Quick view
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$269.95
Sold Out
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover/Installer, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$383.95
Sold Out
JIMS Cruise Drive Vise Stand, made in the usa, Each, specific application
Jims
$122.95
Quick view
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL
Jims
$108.95
Sold Out
JIMS Crankcase Bearing Remover And Installer, Black, made in the usa, specific application, Harley 03-10 FX 03-10 FL
Jims
$275.95
Quick view
JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR
Jims
$460.95
Quick view
JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$416.95
Quick view
JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL
Jims
$293.95
Quick view
JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
Jims
$251.95
Quick view
JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
Jims
$405.95
Quick view
JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL
Jims
$257.95
Quick view
JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL
Jims
$303.95
Quick view
JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
Jims
$341.95
Sold Out
JIMS 5-And 6-Speed Contershaft Bearing Tool, 5-speed, 6-speed, Bearing, Countershaft, made in the usa, Each, Harley 82-15 FX 80-15 FL 87 - 94 XL
Jims
$340.95
Sold Out
JIMS 49mm Fork Seal And Dust Shield Installer, Blue, made in the usa, Each, specific application, Harley 06-15 FX 12-15 FL 02 - 11 VR
Jims
$193.95
Quick view
JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL
Jims
$96.95
Quick view
JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL
Jims
$76.95
Quick view
JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL
Jims
$90.95
Quick view
JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL
Jims
$51.95
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38020042

$269.95

In Stock

Save $-269.95
/
Shipping calculated at checkout.
JIMS Cruise Drive 6-Speed Trap Door Bearing Remover, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Removes main drive gear from main bearing correctly while in transmission case
  • Eliminates need for arbor press and risk of case damage
  • Made in the U.S.A.
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL

DS-38010060

$108.95

In Stock

Save $-108.95
/
Shipping calculated at checkout.
JIMS Cam/Crank Sprocket Locking Tool, Harley 06-15 FX 07-15 FL
  • Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts
  • Made of non-marring Delrin
  • Comes with instructions
  • Made in the U.S.A.
JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR Garage and Shop Jims - K and G Cycles
Jims

JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR

DS-38010088

$460.95

In Stock

Save $-460.95
/
Shipping calculated at checkout.
JIMS Bearing And Race Puller Tool, Black, made in the usa, Each, specific application, Harley 82-07 FX 80-07 FL 86 - 07 XL 02 - 07 VR
  • Multi-faceted tool has many uses
  • Removes flywheel sprocket shaft inner bearing race on 03-07 Twin Cam
  • Can be used to remove Timken bearing (OEM #9028 or #9029) on 84-07 Big Twins, including JIMS 120" engines
  • Can be used to remove Timken bearing pinion shaft inner bearing race on 86-07 XL, including all Buells
  • Can also be used to remove press-fit transmission gears and bearings from input and output shafts on all 02-07 V-Rod models
  • Made in the U.S.A.
JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38010062

$416.95

In Stock

Save $-416.95
/
Shipping calculated at checkout.
JIMS Case Splitter Tool, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • "Breaks" the case sealant by pushing apart both case halves
  • Bolts to primary mounting holes
  • Uses included hand thread-in pushing screw
  • Flywheels will be pushed from the left case
  • Made in the U.S.A.
JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL

DS-38010160

$293.95

In Stock

Save $-293.95
/
Shipping calculated at checkout.
JIMS Cam Bearing Installation Tool, Harley 99-15 FX 99-15 FL
  • Use to install the two inner cam bearings
  • Designed to press from the letter side of the inner cam bearing to eliminate any damage to the bearings, cam or case
  • Will set bearings .023"-.028" below case surface
  • Made in the U.S.A.
JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL

DS-38010066

$251.95

In Stock

Save $-251.95
/
Shipping calculated at checkout.
JIMS Cam Assembly Tool, Black, made in the usa, Each, specific application, Harley 06-15 FX 07-15 FL
  • Holds both cams in an upright position while lowering cam support plate over both guides and cam journal guides
  • Made from a non-marring material that will not damage any of the cams' surfaces
  • Made in the U.S.A.
JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL

DS-38010131

$405.95

In Stock

Save $-405.95
/
Shipping calculated at checkout.
JIMS Balance Shaft Sprocket Alignment Tool, Black, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
  • Takes the guesswork out of setting up your balancer shaft sprocket and chain alignment
  • Made in the U.S.A.
JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL

DS-38010180

$257.95

In Stock

Save $-257.95
/
Shipping calculated at checkout.
JIMS 7mm Valve Guide Reamer, Reaming Tool, made in the usa, Each, specific application, Harley 05-15 FX 05-15 FL 04 - 15 XL
  • Quality pilot lead-in reamer is made of high-speed steel
  • For 7mm valve guides H-D No. 16461-02 that are used in conjunction with the latest conical (Beehive) valve springs
  • Will also work on equivalent aftermarket 7mm valve guides
  • Made in the U.S.A.
JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL

DS-38010085

$303.95

In Stock

Save $-303.95
/
Shipping calculated at checkout.
JIMS Balancer Shaft Removal Tool, Black, made in the usa, Each, specific application, Harley 07-15 FX 07-15 FL
  • Removes both the front and rear counter-balancer shaft bearing assembly, from the left engine case
  • Made in the U.S.A.
JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL

DS-38010145

$341.95

In Stock

Save $-341.95
/
Shipping calculated at checkout.
JIMS Balancer Inner Bearing Installer, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
  • Installs inner balancer bearings mounted in left engine case
  • Can be used on a work bench without using an arbor press
  • Made in the U.S.A.
JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL

DS-38010101

$96.95

In Stock

Save $-96.95
/
Shipping calculated at checkout.
JIMS 25mm Wheel Bearing Puller Adapter, Black, Each, Harley 07-15 FX 07-15 FL 08 - 15 XL
  • Updates discontinued PART #DS-196295 (Jim's #1042) for use with 25mm wheel bearing found on 07-15 models
  • Made in the U.S.A.
JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL

DS-38010094

$76.95

In Stock

Save $-76.95
/
Shipping calculated at checkout.
JIMS 18mm Oxygen Sensor Tool, Harley 06-11 FX 06-10 FL 07 - 15 XL
  • Remove and install oxygen sensors on fuel-injected models
  • Socket tool has 3/8" drive receiver or can be used with a 7/8" wrench
  • Socket tool will withstand up to 125 ft.-lbs. of torque
  • Made in the U.S.A.
JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL

DS-38050070

$90.95

In Stock

Save $-90.95
/
Shipping calculated at checkout.
JIMS 3RD Hand Axle Locker Tool, made in the usa, specific application, Harley 02-15 FL
  • Prevents axle from moving while you are torquing down the axle nut after setting belt tension
  • Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire
  • Made in the U.S.A.
JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL

DS-38070077

$51.95

In Stock

Save $-51.95
/
Shipping calculated at checkout.
JIMS 12mm Oxygen Sensor Tool, Harley 11-15 FX 10-15 FL
  • Remove and install oxygen sensors on fuel-injected models
  • Socket tool has 3/8" drive receiver or can be used with a 7/8" wrench
  • Socket tool will withstand up to 125 ft.-lbs. of torque
  • Made in the U.S.A.