Front-End Tools

V-Twin Manufacturing Motorcycle Hollow Axle Plug Tool - PR
Motorcycle Hollow Axle Plug Tool. Motorcycle axle alignment tool will give the correct center point required for safe vehicle alignment. Hollow axle plug Tool Sold as a pair. Fits Harley-Davidson models: FLT 200

V-Twin Manufacturing 1988-up FXST, 1982-up XL, 1992-up FXDB-FLT Driver Handle Only - Sold Each
Sprocket Shaft Bearing Removal & Installation Tool. Removes and installs engine Sprocket shaft bearings from crankcase. Use with 33416 driver handle. Replaces 94547-80. 2 part set, 4 halves. Item: Driver

RACE TECH RT FORK HOLDING TOOL, made in the usa

• Makes disassembly and assembly of twin-chamber cartridge forks easier by holding cartridge rod while bottom nut is loosened or tightened

LANG TOOLS Neck Bearing Endplay Adjustment Tool For Springer, Black, made in the usa, Each, specific application, Harley 88-06 FX 97-11 FL

• Used to adjust the preload of the neck bearing on Springer forks
• Improved design and triple prong engagement allows for precise neck bearing adjustment
• Tool is a 1" diameter socket, 3/8" square drive for use with a ratchet
• This is the only tool on the market to do this particular task
• Made in the U.S.A.

MOTION PRO Steering Stem Bearing Tool For H-D, Each

• Removes and installs tapered roller bearing at base of steering stem
• Durable black oxide finish with laser engraved logo
• Compact design to fit within steering stops on lower triple clamp
• Removal process requires cutting outer sheet metal cage from tapered roller bearing unit
• Bearing driver adapter installs new bearing without damage to bearing or steering stem
• Fits most Harley-Davidson motorcycles with tapered roller bearing

LANG TOOLS Fork Oil Replenishment Kit, Installation, Removal, made in the usa, Each, M8 x 1.25mm

• Special clear plastic tube and fitting allows replacement of the oil in the fork through the drain plug without disassembling the fork and front end
• For drain bolt size M8 x 1.25mm
• Works great on fairing models with hard-to-reach fork tube nuts

Fork Stem Nut Wrench Flht 96/L* & Flhr 94/L* Jims #977

• Normally to gain access to the top stem nut you would need to remove the radio package
• With this tool you are able to loosen, tighten and torque to specifications the 1 ¹/₂ stem nut without radio removal
• A must when installing a front fork lowering kit

Jims
Wrench (sold each)
Fits FLHT 1996/Later & FLHR 1994/Later

Ringer Fork Seal Driver, 49Mm Install Top Seal In Lower Leg For All 49Mm, Mp 08-0494

• Innovation design makes tool easier and safer to use than old fashioned pin aligned drivers
• Anodized aluminum locking ring features knurled finish for secure no-slip grip and postively locks body halves together during use
• No more worrying about part of the tool falling off and damaging the fork leg
• Perfectly weighted to drive seals
• Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings

Motion Pro
49mm ork Seal Driver
(Imported)

Ringer Fork Seal Driver, 39Mm Install Top Seal In Lower Leg For All 39Mm, Mp 08-0488

• Innovation design makes tool easier and safer to use than old fashioned pin aligned drivers
• Anodized aluminum locking ring features knurled finish for secure no-slip grip and postively locks body halves together during use
• No more worrying about part of the tool falling off and damaging the fork leg
• Perfectly weighted to drive seals
• Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings

Motion Pro
39mm ork Seal Driver
(Imported)

Ringer Fork Seal Driver, 35Mm Install Top Seal In Lower Leg For All 35Mm, Mp 08-0486

• Innovation design makes tool easier and safer to use than old fashioned pin aligned drivers
• Anodized aluminum locking ring features knurled finish for secure no-slip grip and postively locks body halves together during use
• No more worrying about part of the tool falling off and damaging the fork leg
• Perfectly weighted to drive seals
• Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings

Motion Pro
35mm ork Seal Driver
(Imported)

Seal Driver Tool Dual Brkt Fat Fork W/41Mm Tubes Scratch Free Design

• Custom designed tool eliminates scratches on fork tubes during installation of fork seals
• The unique design has protective bushings fitted inside the tool at both ends
• These bushings guide the tool into place without scratching the fork tubes, even when using show chromed tubes
• See the front end section for our 36675 replacement bushings
• Tool can also be used to drive both the upper bushing and seal at the same time when the forks are disassembled

V-FACTOR
Fits all models with 41mm fork tubes
Replaces HD# 34634
(Imported)

Head Cup & Race Installer Tool All Models 36/L* Pulls Races & Cups In Straight Jims.1725

• This tool is designed to easily and squarely install the head cups into the frame neck even when excessive interference fit
• Also installs the bearing race in late model and custom frame necks that do not use a head cup

Jims
Fits all models 1936/Later
Replaces HD# 39302

Top Fork Tube Plug Socket Tool Bt 1949/L* W/Wide Glide Fork R&R Top Nut 1/2"Dr Jims.2043

• This ¹/₂ Drive Top ork Tube Plug Socket eliminates the possibility of rounding or burring the top fork tube nut when removal is necessary

Jims
Fits Big Twin 1949/Later with Wide Glide forks

Head Cup Bearing Race Tool Install Bt 1949/L* Spt 1978/L* Use W/60751 Universal Driver

• Reduce the chances of chipped paint and bruised knuckles
• Used with driver handle 60751, this combination makes short work of a clumsy job

Jims
or Big Twin 1949/Later & Sportster 1978/Later

V-Twin Manufacturing Socket Wrench, Black Oxide Remove-Install Fork Tube Plugs,1-3-8"HEX - Sold Each

Socket wrench with a black oxide finish. Socket is used for easy removal and installation of stock 1-3/8" hex flat top fork tube plugs.

All models

V-Twin Manufacturing 1988-up FXST, 1982-up XL, 1992-up FXDB-FLT Neck Race Remover - Sold Each
Steering Head Bearing Tools fit 1988-up FXST, 1982-up XL, 1992-up FXDB-FLT to remove or install races. Item: remover

V-Twin Manufacturing 1988-up FXST, 1982-up XL, 1992-up FXDB-FLT Fork Race Installer - Sold Each
Steering Head Bearing Tools fit 1988-up FXST, 1982-up XL, 1992-up FXDB-FLT to remove or install races. Item: Installer

V-Twin Manufacturing 1984-up JIMS WG Inner Plug Wrench - Sold Each
Fork Tube Plug Tool has a special socket which fits 1948-up Glide Fork Plug, 1/2 drive. Brand: Jims

V-Twin Manufacturing 1988-up FXST, 1982-up XL, 1992-up FXDB-FLT Fork Race Drvr Handle Adapter - Sold Each
Steering Head Bearing Tools fit 1988-up FXST, 1982-up XL, 1992-up FXDB-FLT to remove or install races. Item: Driver Handle Adapter, 1992-up FLT-FXD

V-Twin Manufacturing Lower Fork Bearing Press Tube 1"Id - Sold Each
Fork Bearing Installer Tool fits over 1 stem allowing bearing to be driven on.

V-Twin Manufacturing FXSTS Fork Stem Bearing Wrench - Sold Each
FXSTS Fork Stem Bearing End Play Setup Wrench. Offset Handle allows for proper clearance of fuel tank and other accessories.

V-Twin Manufacturing Lower Bearing Removal Tool - Sold Each
Lower bearing removal tool includes cross arm puller, rods and lower puller claw. To use the tool remove roller from old bearing, install claw and turn puller. Fits: FXR 1982-1994 XL 1978-UP FL 1948-1984 FX 1971-1984