Mid-USA

Cup Holder, Plastic Attaches To Handlebar

• Easily attaches to handlebars
• lexible plastic hugs cup for stability while traveling
• Have a cup of Joe while enjoying your morning ride

Black Plastic Cup Holder

Handlebars,Cus High Buckhorn Pre-82 34-1/2"Wide 12-1/4"Rise 8-1/4"Pull Back 9"Ctr Width Cp

• Fits 1982/Later models including ly-By-Wire
• 1 1/2 diameter
• 5 pull back
• Drilled for internal wiring
• V-FACTOR
• High Buckhorn
• Chrome Plated
• Width: 34 ¹/₂
• Rise: 12 ¹/₂
• Pullback: 8 ¹/₄
• Center Width: 9
• Pre-1982
• (Imported)

Highnoon Handlebar,Black 30" Wide,12"Rise,5.25"Pullback 1.25"Od,Drilled & Dimpled

• 1 ¹/₄ O.D. steel handlebars provide a massive look with a style right out of the 1950's
• To keep the switch wires out of sight the bars have been dimpled (like the 1982/Later OE bars) and slotted under the switch housing area so the wires can be run internally
• The brake side has been clearanced to be used with OE style master cylinders (all years including 1996/Later) and most custom brake master cylinders
• Knurled at the riser area to help prevent slippage
• Fits risers mounted on 3 ¹/₂ centers

V-FACTOR
Highnoon, Black Finish
Width: 30
Rise: 12, Pullback: 5-1/4
Center Width: 8-1/2
(Imported)

Ape Hanger Handlebar, 1-1/4" Touring Models W/Fairing 08/L* Chrome 1-1/4" X 12" High

• High quality chrome plated for show stopping looks
• Sweged at bar transitions for smooth clean look
• Offset bend in handlebars for fairing clearance

V-FACTOR

Chrome Plated

1 ¹/₄ O.D.

Width: 38

Rise: 12

Pullback: 15

Fits Touring models 2008/Later & 1980/2007 models

(Imported)

Head Cups W/Bearings And Races Big Twin 49/88 Custom Frames, Chrome
A set of 2 chrome plated steel Head Cups complete with Taper roller bearings and races.Chrome Plated Head Cups with Races & V-FACTOR Bearings
Fits L, X & XWG 4 speed models 1949/Later, Softail 1984/1988 and most Big Twin custom frames
Replaces HD# 48315-60, 48311-60 & 48300-60

Fork Slider Tube Asy, 49Mm FXDWG 2006/Later* 28" Standard Length

• Completely assembled and ready for installation
• Features hard chromed fork tube for smooth action and years of service
• Includes everything as shown and all internals
• Sold as one assembly. Order two to complete one front end

V-FACTOR
Hard Chrome Plated Fork Slider Tube
STD tube length, sold each
Fits FXDWG 2006/Later
(Imported)

Front Fork Assembly Fxst,Fxdwg 00/Later* Polished Rpls Hd 46004-00,46006-00

• High quality replacement fork kit
• See below for availability of slider finishes
• Single disc (except where noted)
• ork oil found in the front end section

V-FACTOR
Polished Set
STD Length
Fits XST & XDWG 2000/Later
(Imported)

Stem Cap Bolt Chrome Plated Flst (Ex Flsts)86/L* Fxr,Fxd & Spt 86/L* Rpls.45668-90 9977-1
Colony
Chrome Plated Stem Bolt Cap
Fits LST 1986/Later, FXR 1986/Later, XD 1991/Later & Sportster 1986/Later
Replaces HD# 45668-90
Note: Only fits FXR, XD & Sportster when used with 36681

Fork Leg Studs 35Mm 73/87, 41Mm 77/L* Rpls Hd 45998-73
V-FACTOR
Studs only
Replaces HD# 45998-73
(Imported)

Fork Tubes Std Flst 86/99 Stock Length Rpls Hd# 45930-86

• All fork slider tubes are centerless ground from seamless aircraft tubing in either show chrome (USA) or hard chrome (Import)
• All fork tubes are sold in pairs and include spring spacers

Hard Chrome Plated
2 OS Length Set fits FLT, FLTC, FLTCU, FLHT, FLHTC, FLHTCU, FLHS, FLHR 1986/1996 with or without air forks
Replaces HD# 45827-84
Stock 22 7/8 Length Set fits LST, LSTC, LST, LSTN 1986/1999
Replaces HD# 45930-86

Springer Left Lower Rocker, Cp Use With Most Custom Springers Includes Installed Bushings
HARDBODY
Chrome Plated Left Lower Rocker

Springer Spring Seat Bottom Use With Most Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Spring Seat Bottom (Sold as Pair)

Swingarm Bolt Repair Kit Big Twin 4Spd 1958/1986(Ex St) Self Tapping W/.025 Os Threads

• Save time and money with this self-tapping swingarm bolt repair kit
• Made in the USA of heat treated, flame hardened, 1045 steel, these bolts will repair damaged threads in your left hand swingarm mount
• These swingarm bolts will restore the stripped out threads without the need of taps, or Heli-coils^™

Stevenson's Cycle
.025 Oversize
Fits Big Twin 4 speed 1958/1986

Solo Seat Spring Mounts,Chrome Bolt On Universal Fitment Includes Hardware

• These solo seat spring mounts are available in either a chrome plated bolt-on version or raw steel weld-on style
• Bolt-on version requires a hole to be drilled in the frame tube for the bolt to pass through
• Both styles work with 1 1/4 tubing, weld-on style works only on 1 tubing
• Great addition to your bike when you are running a solo seat with coil springs

V-FACTOR
Chrome Plated Bolt-On Style Mount
Works with 1 1/4 rame Tube
(Imported)

Solo Seat Coil Spring,Copper 5"Length,Custom Seat Use Heavy Duty Spring Steel

• Made of special gauge spring steel
• Carefully coiled to ensure the proper amount of tension
• See below for availability of finishes and spring heights
• Sold Each

V-FACTOR
Antique Copper Plated, 5 height
(Imported)

Solo Seat Spring,Copper 3"Length,Custom Seat Use Heavy Duty Spring Steel

• Made of special gauge spring steel
• Carefully coiled to ensure the proper amount of tension
• See below for availability of finishes and spring heights
• Sold Each

V-FACTOR
Antique Copper Plated, 3 height
(Imported)

Seat Screw, Quick Release Most Models 1973/1995 1/4-28 Thread Rear Mount

• Make seat removal quick and easy with this Quick Release Screw and Pin
• Simply replace the original hold down screw with this quick release post, reinstall the seat and slide the pin through the post
• The slide through pin is held in place by a spring loaded ball stop detent and will not vibrate loose
• This little item is a time saver for those who service their machine or have the oil filler located under the seat

V-FACTOR
Chrome Plated ¹/₄-28 Screw
Fits most models 1973/1995
(Imported)

Saddlebag Chrome Filler Strips Touring Models 1993-2008

• Mounts between the rear fender and saddlebag assembly and covers the rear shock mount
• Manufactured from heavy-duty 16 gauge steel
• See below for availability of finishes
• Sold in pairs

V-FACTOR
Chrome Plated Panel Pair
Fits Touring models 1993/2008 (except FLHX), FLHRCI with rear docking kit, FLHRS or models equipped with nostalgic and triple rail saddlebag guard rails or chrome saddlebag guard kit, Electra Glide^™ light rails, leather saddlebags or FLTR 1998/Later
Replaces HD# 45898-98

Engine Stabilizer,Chrome Flt 80/L*,Fxr 82/94,Dyna 91/94 Replaces Hd 16219-79B

• Used to stabilize and align the engine and drive train
• The tail end of the heim joints are thicker than the OE part for a custom look
• Steel construction
• Two are required for FLT & FXR models

V-FACTOR
Chrome Plated
Fits FLT models 1980/Later, FXR 1982/1994 & Dyna 1991/1994
Replaces HD# 16219-79B
(Imported)

Rider Footboard Heel Guard,Blk Fits Oe Style Footboards 86/L* Rpls Hd 50500225

• Keep your expensive boots and shoes from burning caused by contact with the exhaust system
• Mounts on the right side rider footboard
• Does not restrict foot movement and adds a nice touch of chrome or black as listed
• Sold each

V-FACTOR
Black Heel Guard
Fits OE Style Rider ootboards 1986/Later
Replaces HD# 50500225

Jiffy Stand Mount,Chrome Touring Models 1981/2008 Rpls Hd 50078-81A

• Best quality replacement mount in high quality chrome plating
Replace your fatigued mount for much less cost than OEM

V-FACTOR
Chrome Plated Mount
Fits Touring models 1981/2008
Replaces HD# 50078-81A
(Imported)

Jiffy Stand Leg Stop Chrome Fl Fx St 1936/2006(Ex Dyna 06/ Later)Rpls Hd 50015-74T

• Used to hold the jiffy stand in the correct position when in use
• aithful copy of the original

V-FACTOR
Chrome Plated Stop
Fits all Big Twin models 1936/2006 (except Dyna 2006)
Replaces HD# 50015-74T & 50094-36
(Imported)

Front Fender Adapter Kit,Cp Touring Models 2000/Later* Rpls Hd 59013-02A

• Allows you to install a smooth curving at Boy front fender on your touring model
• Inexpensive and easy to install way to customize your touring model

V-FACTOR
Chrome ront ender Adaptor
Fits Touring models & Road King 2000/Later
Replaces HD# 59013-02A

Tri-Bar Red LED Light W/Smoke Lens,06/L* Flhx,Also Fits 99/L* Flhr/Flt If #22980 Used

• Tri-bar running lights with high intensity red LEDs
• See below for availability of len's color
• Triple light bands are dual function: lights glow in running mode and increase in intensity when the brake is applied
• Kits include all the needed wiring, hardware and OE loom connectors

V-FACTOR
Red LED with smoke lens
Fits FLHX 2006/Later
Also fits FLHR/LT models 1999/Later when used in conjunction with the 22980 rear fender extension
(Imported)

Debris Deflector, Stainless St 86/99, Oe Width,Wide Tire Fat-A-Tude Rd Rr Fork Pol Ss

• Designed to help keep the road grime and debris off the oil tank, starter motor and transmission area
• These stainless steel debris reflectors replaces the OE black plastic one
• or ease of cleaning and flashy good looks, the oil tank side is semi-polished while the more focal wheel side is highly polished

HARDBODY
Stainless Steel Deflector
Fits Softail 1986/1999 & all HARDBODY Softail style rear forks
Replaces HD# 60363-86C

Debris Deflector, Stainless Fits Softail 2008/2010 Rpls Hd# 60197-08

• Designed to help keep the road grime and debris off the oil tank, starter motor and transmission area
• These stainless steel debris reflectors replaces the OE black plastic one
• or ease of cleaning and flashy good looks, the oil tank side is semi-polished while the more focal wheel side is highly polished

HARDBODY
Stainless Steel Deflector
Fits Softail 2008/2010 & all HARDBODY Softail style rear forks
Replaces HD# 60197-08

Timer Plate Stand-Offs,Ss Bt 70/99(Ex Tc)& Spt 1971/2003 .700 Long,Rpls Hd 32606-82

• If you have ever had a timer plate stud (stand off) break off at the screw end in the gear cover, then you can realize the importance of a high quality pair
• These are machined from 17-4 stainless steel and are undeniably the very best available

V-FACTOR
High Strength Stainless Steel Pair
Fits Big Twin 1970/1999 (except Twin Cam) & Sportster 1971/2003
.700 unthreaded section of stand-off length
Replaces HD# 32606-82

Mini Bullet Light Lens,Smoked Use With #11448
V-FACTOR
Replacement Smoked Lens
(Imported)

Bullet Marker Light,Blue Lens Dual Filament,12 Volt Chrome Plated Housing
V-FACTOR
Chrome Plated, Each
Bullet Marker
Incandescent Style
Blue Lens Color
Dual ilament
(Imported)

Headlight,3.5" Bullet Style Cp 12V,55/60 Watt Hlgn,Inc 5 Watt Running Light,Bottom Mount

• 12 volt Headlight features a replaceable H4 type 55/60 watt halogen bulb
• Includes a 5 watt running light for a low draw daytime use safety feature (shown on Springer in additional images)
• Bottom type swivel mount includes a ³/₈-24 x 1 stud with nut
• Pre-wired with 6 of lead wire
• The fluted lens is TUV approved

Note: Does not include a high beam indicator and should be used accordinglyV-FACTOR
Chrome Plated Halogen Headlight, (Imported)

Jims fork cap installation tool 5821 for use on 49mm forks allows the installation of the fork tube caps on the motorcycle without removing other parts 2014-UP FLT 2006-2017 FXD