Mid-USA

Filter

Filter

Brand

clear
19 products

19 products

Oil Screen Plug Tool BT L52/99 (Ex Tc)Tappet Plug 7/16" Dr W/O-Ring,Slot Design
Mid-USA
$10.25
Sold Out
Engine Tool,Socket Wrench Gear Shaft Nut Big Twin 1954/1992 Replaces Hd 94555-55A....Jims
Mid-USA
$82.50
Cam/Crank Sprocket Lock Tool Twin Cam 07/L* Dyna 06/L* Jims 994
Mid-USA
$99.95
Engine Tool,Puller Gear Cover BT 1970/L(Ex Tc 88) Spt 71/L* Removes Gear Cover
Mid-USA
$22.45
Balancer/Bearing Service Tool St 07/L*,Installs Shaft,Also Use To R&R Rh Bearings,Mfg#957
Mid-USA
$258.40
Bushing Installer & Drill Jig BT 70/L(Ex Tc88)Gr Cvr Bushing Installer/#31 Drill..1012-70Tb
Mid-USA
$76.30
Balancer Shaft Removal Tool Fits All Softail Models 07/L* Used On Fr & Rr Shafts,Mfg#960
Mid-USA
$326.40
Engine Rotator Tool Big Twin 6 Speed 2006/Later* Rpls Hd-48283 Mfg#975
Mid-USA
$186.20
Bushing Installer & Drill Jig BT 36/69 Case/Gr Cvr Cam Bshg Installer/#31 Drill..1011-36Tb
Mid-USA
$76.30
Crank Case Tool BT 55/06 Dyna 99/05 Jims 1047-Tp
Mid-USA
$353.15
Cam Bearing Tool Collar Only For All Twin Cams Jims 1278-3
Mid-USA
$113.30
Case Splitter Tool Twin Cam 07/L* Dyna 06/L* Jims 995
Mid-USA
$449.25
Cam Assembly Tool Twin Cam 07/L* Dyna 06/L* Jims 990
Mid-USA
$271.20
Bushing Installer & Drill Jig BT 54/92 Gr Cvr Gr Shft Bshg Installer/#31 Drill..1013-54Tb
Mid-USA
$76.30
Gear Cover & Cam Seal Tool BT 1970/L(Ex Tc 88)Remove W/O Removing Gear Cover Jims .2243
Mid-USA
$210.00
Cam Bearing Remover Twin Cam 07/L* Dyna 06/L* Jims 993
Mid-USA
$417.15
Gear Cvr Bushing Dowel Pin BT 36/L(Ex Tc88) K Spt 54/90 Replaces Hd #275
Mid-USA
$1.35
Primary Drive Lock Bar Tool FXR & Flt 5 Spd All Years* Sprocket To Sprocket Jims.2317
Mid-USA
$51.85
Sold Out
Needle Bearing Puller Tool BT Spt For Use On Hd 9063 & Hd 35961-52 Bearings Jims.2235
Mid-USA
$262.75
Oil Screen Plug Tool BT L52/99 (Ex Tc)Tappet Plug 7/16" Dr W/O-Ring,Slot Design Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Oil Screen Plug Tool BT L52/99 (Ex Tc)Tappet Plug 7/16" Dr W/O-Ring,Slot Design

MID-60705

$10.25

In Stock

Save $-10.25
/
Shipping calculated at checkout.
Oil Screen Plug Tool Bt L52/99 (Ex Tc)Tappet Plug 7/16" Dr W/O-Ring,Slot Design
  • Low profile design (1/2 tall) allows access to the tappet screen plug on bikes with exhaust pipe interference
  • Designed with an O ring on the 7/16 hex to hold the tool in the box end wrench on socket
  • Features a flange design that allows more downward force to be applied to the tool for stubborn plugs
Motion Pro
For Big Twin Late 1952/1999 with OEM style slotted plug (except Twin Cam), (Imported)
Cam/Crank Sprocket Lock Tool Twin Cam 07/L* Dyna 06/L* Jims 994 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam/Crank Sprocket Lock Tool Twin Cam 07/L* Dyna 06/L* Jims 994

MID-60810

$99.95

In Stock

Save $-99.95
/
Shipping calculated at checkout.
Cam/Crank Sprocket Lock Tool Twin Cam 07/L* Dyna 06/L* Jims 994
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Camshaft/Crankshaft Locking Tool
Fits Twin Cam 2007/Later & Dyna 2006/Later
Precision tool allows the technician to lock the camshaft and crankshaft sprockets to properly remove, replace and torque the sprocket bolts. Tool is made non-marring delrin
Replaces HD# 42314
Engine Tool,Puller Gear Cover BT 1970/L(Ex Tc 88) Spt 71/L* Removes Gear Cover Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Puller Gear Cover BT 1970/L(Ex Tc 88) Spt 71/L* Removes Gear Cover

MID-60712

$22.45

In Stock

Save $-22.45
/
Shipping calculated at checkout.
Engine Tool,Puller Gear Cover Bt 1970/L(Ex Tc 88) Spt 71/L* Removes Gear Cover
This steel puller will easily remove a gear cover with zero chance of damage to an expensive chrome job or gasket surface. Motion Pro
Fits Big Twin 1970/Later (except Twin Cam) & Sportster 1971/Later
Balancer/Bearing Service Tool St 07/L*,Installs Shaft,Also Use To R&R Rh Bearings,Mfg#957 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Balancer/Bearing Service Tool St 07/L*,Installs Shaft,Also Use To R&R Rh Bearings,Mfg#957

MID-60760

$258.40

In Stock

Save $-258.40
/
Shipping calculated at checkout.
Balancer/Bearing Service Tool St 07/L*,Installs Shaft,Also Use To R&R Rh Bearings,Mfg#957
  • The balancer shaft installation tool is used to align and safely install a new balancer bearing and counter balancer shaft into a Twin Cam 96 or 110 B Softail engine case
  • Use our 60763 to remove the balancer shafts
  • The right side bearing tool removes and installs the outboard balancer bearing on the chain guide support plate
  • Includes instructions
Jims
Fits Softail 2007/Later
Balance Shaft Installation Tool Replaces HD# 48309 & Right side Bearing R&R Tool Replaces HD# 48474
Bushing Installer & Drill Jig BT 70/L(Ex Tc88)Gr Cvr Bushing Installer/#31 Drill..1012-70Tb Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Bushing Installer & Drill Jig BT 70/L(Ex Tc88)Gr Cvr Bushing Installer/#31 Drill..1012-70Tb

MID-60779

$76.30

In Stock

Save $-76.30
/
Shipping calculated at checkout.
Bushing Installer & Drill Jig Bt 70/L(Ex Tc88)Gr Cvr Bushing Installer/#31 Drill..1012-70Tb
Not only has Jims come up with the best bushing installer available, but they have incorporated a drill jig into each tool for ease of pining the bushing after installation. This tool is so quick and easy it will pay for Fitself the first time you use it. All jigs include #31 drill bit. Jims
Installer/Drill Jig
Fits Big Twin 1970/Later (except Twin Cam) gear cover cam bushing
Replaces HD# 25581-70
Balancer Shaft Removal Tool Fits All Softail Models 07/L* Used On Fr & Rr Shafts,Mfg#960 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Balancer Shaft Removal Tool Fits All Softail Models 07/L* Used On Fr & Rr Shafts,Mfg#960

MID-60763

$326.40

In Stock

Save $-326.40
/
Shipping calculated at checkout.
Balancer Shaft Removal Tool Fits All Softail Models 07/L* Used On Fr & Rr Shafts,Mfg#960
  • Designed to remove both front and rear counter balance shaft assembly from the left engine case
  • Use on both 96 and 110 Beta engines
  • Use with 60760 installation tool
  • Includes instructions
Jims
Fits Softail 2007/Later
Replaces HD# 48457
Engine Rotator Tool Big Twin 6 Speed 2006/Later* Rpls Hd-48283 Mfg#975 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Rotator Tool Big Twin 6 Speed 2006/Later* Rpls Hd-48283 Mfg#975

MID-60761

$186.20

In Stock

Save $-186.20
/
Shipping calculated at checkout.
Engine Rotator Tool Big Twin 6 Speed 2006/Later* Rpls Hd-48283 Mfg#975
  • Used to rotate the flywheel assembly when doing pushrod adjustments, building engines or when checking operating clearances such as piston or valve to valve
  • Can also be used to hold the flywheel assembly from rotating when torquing the cam drive sprockets retention bolts
  • Manufactured with a long socket design making it easier to use without a 1/2 drive extension on your 1/2 driver
  • Includes instructions
Note: Not for use with pneumatic or electric impact; this tool is only guaranteed for use with hand driver - not impactsJims
Fits Big Twin 6 speed 2006/Later
Replaces HD# 48283
Bushing Installer & Drill Jig BT 36/69 Case/Gr Cvr Cam Bshg Installer/#31 Drill..1011-36Tb Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Bushing Installer & Drill Jig BT 36/69 Case/Gr Cvr Cam Bshg Installer/#31 Drill..1011-36Tb

MID-60778

$76.30

In Stock

Save $-76.30
/
Shipping calculated at checkout.
Bushing Installer & Drill Jig Bt 36/69 Case/Gr Cvr Cam Bshg Installer/#31 Drill..1011-36Tb
Not only has Jims come up with the best bushing installer available, but they have incorporated a drill jig into each tool for ease of pining the bushing after installation. This tool is so quick and easy it will pay for Fitself the first time you use it. All jigs include #31 drill bit. Jims
Installer/Drill Jigs
Fits Big Twin 1936/1969 case and gear cover cam bushing
Replaces HD# 25581-36 & 25597-36
Crank Case Tool BT 55/06 Dyna 99/05 Jims 1047-Tp Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Crank Case Tool BT 55/06 Dyna 99/05 Jims 1047-Tp

MID-60764

$353.15

In Stock

Save $-353.15
/
Shipping calculated at checkout.
Crank Case Tool Bt 55/06 Dyna 99/05 Jims 1047-Tp
  • Easily removes crankshaft assembly from left case on Big Twin models
  • This tool will also separate case halves that have tight sealant bond
  • Includes instructions
Jims
Fits Panhead 1955/1965, Shovelhead 1966/1984, Big Twin Evolution 1984/1999, Twin Cam 1999/2006 & Dyna 1995/2005
Cam Bearing Tool Collar Only For All Twin Cams Jims 1278-3 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Bearing Tool Collar Only For All Twin Cams Jims 1278-3

MID-60807

$113.30

In Stock

Save $-113.30
/
Shipping calculated at checkout.
Cam Bearing Tool Collar Only For All Twin Cams Jims 1278-3
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Cam Bearing Installation Tool
Collar Only fits all Twin Cams
Tool will install the two inner cam needle bearings into the crankcase. It perfectly aligns to the shaft bores for a precision press fit
Case Splitter Tool Twin Cam 07/L* Dyna 06/L* Jims 995 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Case Splitter Tool Twin Cam 07/L* Dyna 06/L* Jims 995

MID-60838

$449.25

In Stock

Save $-449.25
/
Shipping calculated at checkout.
Case Splitter Tool Twin Cam 07/L* Dyna 06/L* Jims 995
  • Easily removes crankshaft assembly from left case on Big Twin models
  • This tool will also separate case halves that have tight sealant bond
  • Includes instructions
Jims
Fits Twin Cam 2007/Later & Dyna 2006/Later
Cam Assembly Tool Twin Cam 07/L* Dyna 06/L* Jims 990 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Assembly Tool Twin Cam 07/L* Dyna 06/L* Jims 990

MID-60809

$271.20

In Stock

Save $-271.20
/
Shipping calculated at checkout.
Cam Assembly Tool Twin Cam 07/L* Dyna 06/L* Jims 990
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Cam Assembly Tool
Use this tool to hold both cams in an upright position while lowering the cam support plate over both guides and cam journal guides. Tool has been manufactured from a non-marring material, that will not damage any of the cam's surfaces. Use on all Twin Cam 2007/Later & Dyna 2006/Later
Bushing Installer & Drill Jig BT 54/92 Gr Cvr Gr Shft Bshg Installer/#31 Drill..1013-54Tb Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Bushing Installer & Drill Jig BT 54/92 Gr Cvr Gr Shft Bshg Installer/#31 Drill..1013-54Tb

MID-60780

$76.30

In Stock

Save $-76.30
/
Shipping calculated at checkout.
Bushing Installer & Drill Jig Bt 54/92 Gr Cvr Gr Shft Bshg Installer/#31 Drill..1013-54Tb
Not only has Jims come up with the best bushing installer available, but they have incorporated a drill jig into each tool for ease of pining the bushing after installation. This tool is so quick and easy it will pay for Fitself the first time you use it. All jigs include #31 drill bit. Jims
Installer/Drill Jigs
Fits Big Twin 1954/1992 gear cover gear shaft bushing
Replaces HD# 25582-54 & 25582-73
Gear Cover & Cam Seal Tool BT 1970/L(Ex Tc 88)Remove W/O Removing Gear Cover Jims .2243 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Gear Cover & Cam Seal Tool BT 1970/L(Ex Tc 88)Remove W/O Removing Gear Cover Jims .2243

MID-60813

$210.00

In Stock

Save $-210.00
/
Shipping calculated at checkout.
Gear Cover & Cam Seal Tool Bt 1970/L(Ex Tc 88)Remove W/O Removing Gear Cover Jims .2243
  • Remove the cam seal without removing the cam cover
  • Mount the tool, screw in the removal screws, rotate the center and out pops the seal
  • Presses seal in square and flat for a no leak fit
  • Simplifies cam cover removal from the engine case
Jims
or Big Twin 1970/Later (except Twin Cam)
Cam Bearing Remover Twin Cam 07/L* Dyna 06/L* Jims 993 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Bearing Remover Twin Cam 07/L* Dyna 06/L* Jims 993

MID-60808

$417.15

In Stock

Save $-417.15
/
Shipping calculated at checkout.
Cam Bearing Remover Twin Cam 07/L* Dyna 06/L* Jims 993
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Inner Cam Bearing Remover
Fits Twin Cam 2007/Later & Dyna 2006/Later
Blind hole puller will easily remove the crankcase needle bearing that supports the camshafts. The unique design prevents the pin rollers from accidentally falling into the crankcase that is known to happen when using inferior pullers
Gear Cvr Bushing Dowel Pin BT 36/L(Ex Tc88) K Spt 54/90 Replaces Hd #275 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Gear Cvr Bushing Dowel Pin BT 36/L(Ex Tc88) K Spt 54/90 Replaces Hd #275

MID-66038

$1.35

In Stock

Save $-1.35
/
Shipping calculated at checkout.
Gear Cvr Bushing Dowel Pin Bt 36/L(Ex Tc88) K Spt 54/90 Replaces Hd #275
HARDWARE
Bushing Dowel Pin fits Big Twin 1936/Later (except Twin Cam)
Gear Cover Bushing Dowel Pin fits Shovelhead 1970/1984, Big Twin Evolution 1984/1999, K Model & Sportster 1954/1990
Also used on all bushings and designed to work with Jims bushing installer and drill jigs
Package of 5
Replaces HD# 275
Primary Drive Lock Bar Tool FXR & Flt 5 Spd All Years* Sprocket To Sprocket Jims.2317 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Bar Tool FXR & Flt 5 Spd All Years* Sprocket To Sprocket Jims.2317

MID-70436

$51.85

In Stock

Save $-51.85
/
Shipping calculated at checkout.
Primary Drive Lock Bar Tool Fxr & Flt 5 Spd All Years* Sprocket To Sprocket Jims.2317
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits FXR & FLT 5 speed, all years