Mid-USA

Filter

Filter

Brand

clear
10 products

10 products

Cam Bearing Installer All Twin Cams Jims 787
Mid-USA
$302.55
Engine Tool,Camshaft Bearing BT 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60
Mid-USA
$113.20
Cam Bearing Puller Tool BT 1958/Later*(Ex Tc88)Remove Case Bearing....Jims 95760-Tb
Mid-USA
$273.30
Cam Brng Installation Tool BT 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188
Mid-USA
$239.95
Cam Bushing Line Reamer BT 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70
Mid-USA
$446.71
Engine Tool,Inner Cam Bearing Twin Cam 99/06 Except 06 Dyna Jims 1279
Mid-USA
$260.25
Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285
Mid-USA
$79.95
Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283
Mid-USA
$78.05
Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277
Mid-USA
$284.85
Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290
Mid-USA
$484.35
Cam Bearing Installer All Twin Cams Jims 787 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Bearing Installer All Twin Cams Jims 787

MID-60830

$302.55

In Stock

Save $-302.55
/
Shipping calculated at checkout.
Cam Bearing Installer All Twin Cams Jims 787
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Cam Bearing Installation Tool
Fits All Twin Cams
Tool will install the two inner cam needle bearings into the crankcase. It perfectly aligns to the shaft bores for a precision press fit
Engine Tool,Camshaft Bearing BT 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Camshaft Bearing BT 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60

MID-60749

$113.20

In Stock

Save $-113.20
/
Shipping calculated at checkout.
Engine Tool,Camshaft Bearing Bt 58/L(Tc88) Uw/60751 Driver Replaces Hd 97272-60
  • Meets or exceeds original factory specifications for years of dependable service
  • Used to install all Torrington style camshaft needle bearings into right case
  • Use with 60751 universal driver tool which can be found in the general merchandise section
Jims
Fits Big Twin 1958/Later (except Twin Cam)
Replaces HD# 97272-60
Cam Bearing Puller Tool BT 1958/Later*(Ex Tc88)Remove Case Bearing....Jims 95760-Tb Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Bearing Puller Tool BT 1958/Later*(Ex Tc88)Remove Case Bearing....Jims 95760-Tb

MID-60793

$273.30

In Stock

Save $-273.30
/
Shipping calculated at checkout.
Cam Bearing Puller Tool Bt 1958/Later*(Ex Tc88)Remove Case Bearing....Jims 95760-Tb
Ever try to remove a cam bearing from a Big Twin gear case without splitting the case and have a needle bearing roller fall into the cases? That will never happen with this high quality tool. The cam gear needle bearing must be replaced with every motor rebuild and or cam change. Use bearing tool 60749 and driver tool 60751 which you must purchase separately for bearing installation and to produce a professional bearing replacement in minutes. Jims
Fits Big Twin 1958/Later (except Twin Cam)
Replaces HD# 95760-69
Cam Brng Installation Tool BT 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Brng Installation Tool BT 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188

MID-60767

$239.95

In Stock

Save $-239.95
/
Shipping calculated at checkout.
Cam Brng Installation Tool Bt 58/L*(Ex Tc88) Sets Depth Perfect Alignment Jims .2188
This tool easily installs the bearing to the proper depth and alignment without damaging the bearing. Jims
Fits all Big Twin 1958/Later (except Twin Cam)
Cam Bushing Line Reamer BT 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Cam Bushing Line Reamer BT 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70

MID-60790

$446.71

In Stock

Save $-446.71
/
Shipping calculated at checkout.
Cam Bushing Line Reamer Bt 70/L*(Ex Tc88) Gear Cvr Cam Bushing......Jims .1023-70
  • Used to line ream and finish fit gear cover cam bushing
  • This tool pilots off of the cam bearing for a true centerline.
  • A must have tool to do a professional job
Jims
Fits Big Twin 1970/Later (except Twin Cam)
Engine Tool,Inner Cam Bearing Twin Cam 99/06 Except 06 Dyna Jims 1279 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Inner Cam Bearing Twin Cam 99/06 Except 06 Dyna Jims 1279

MID-60828

$260.25

In Stock

Save $-260.25
/
Shipping calculated at checkout.
Engine Tool,Inner Cam Bearing Twin Cam 99/06 Except 06 Dyna Jims 1279
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Inner Cam Bearing Remover
Fits Twin Cam 2000/2006 (except 2006 Dyna)
Blind hole puller will easily remove the crankcase needle bearing that supports the camshafts. The unique design prevents the pin rollers from accidentally falling into the crankcase that is known to happen when using inferior pullers
Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285

MID-60831

$79.95

In Stock

Save $-79.95
/
Shipping calculated at checkout.
Engine Tool,Cam/Crank Lock Twin Cam 99/06 Except 06 Dyna Jims 1285
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Camshaft/Crankshaft Locking Tool
Fits Twin Cam 1999/2006 (except 2006 Dyna)
Precision tool allows the technician to lock the camshaft and crankshaft sprockets to properly remove, replace and torque the sprocket bolts. Tool is made from non-marring delrin
Replaces HD# 42314
Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283

MID-60827

$78.05

In Stock

Save $-78.05
/
Shipping calculated at checkout.
Engine Tool,Camchain Tensioner Tc 88 1999/L* Needed To R&R Cams Jims .1283
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Cam Chain Tensioner Tool
Tool will unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams and can also check spring loads on chain tensioners
Replaces HD# 42313
Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277

MID-60829

$284.85

In Stock

Save $-284.85
/
Shipping calculated at checkout.
Engine Tool,Cam Shaft Remover Twin Cam 99/06 Except 06 Dyna Jims 1277
  • Due to the radical new design of the Twin Cam, specialized tools are required to properly perform engine repair without damage
  • All Jims tools are manufactured from top quality material and designed for years of trouble free service
  • All tools include instructions
Jims
Camshaft Remover & Installation Tool
Multifunction tool will remove and replace front and rear camshafts and the ball bearings. It provides the precision alignment of the camshaft to insure a smooth press in and out of the support plate
Replaces HD# 43644
Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290

MID-60834

$484.35

In Stock

Save $-484.35
/
Shipping calculated at checkout.
Engine Tool,Cam Gear Installer Sh Evo 1970/1999 And Install W/Precision .1290
  • Designed to locate the cam gear on any single cam and duplicate the exact position when installing that gear on another cam shaft
  • Allows you to preserve the cam gear to pinion gear fit when installing a different cam
  • Not only can you install the gear in the exact same position, this tool allows you to advance or retard the gears position by up to 10° with an accuracy of 1/4 of a degree
  • A shop press will be required for the gear removal and installation
  • Complete instructions are included
Note: Proper gear to shaft press fit is .0017 through .0025Jims
or Big Twin models 1970/1999 with single cam