Mid-USA

Air Filter Element S & S E&G Teardrop Housings Performance Element
K&N brand ilter Chargers^® feature a 10-Year/Million-Mile Limited Warranty, are emissions legal in all 50 states and have been made in the USA for over 40 years

POWER HOUSE filter elements are engineered for increased performance, feature a washable and reusable high flow 4-layer cotton element and a urethane body for maximum life and a precise fit. Made in the U.S.A. with U.S.A. components

V-FACTOR blue filter elements are a quality imported product at an affordable price

• These high flow filters are designed to increase performance in both horsepower and throttle response by reducing air flow restriction while maintaining the filtration levels critical to ensure long engine life
• Not only will these filters improve the performance of a stock motorcycle, they are necessary when used in conjunction with performance upgrades such as low restriction exhaust, performance cam(s), carburetor kits or hotter ignition systems
• eatures a pre-oiled cotton/fabric type element that can be washed and re-oiled up to 25 times before it is considered to be no longer serviceable
• or best results when servicing the filter, use our air filter cleaner and filter oil found in the general merchandise section

V-FACTOR
6 O.D. x 2 1/2 width
Fits S & S Super E or G with teardrop cover

Air Cleaner Screw,Chrome Twin Cam 1999/Later* Rpls Hd 29600-00

• Replaces the OE polished air cleaner screw
• Sold each

V-FACTOR
Chrome Air Cleaner Screw
Fits Twin Cam 1999/Later
Replaces HD# 29600-00
(Imported)

EFI Support Bracket,Chrome 2008/Later* Touring Models Uw Custom Air Cleaner

• Replace your unsightly black support bracket with this high quality chrome plated piece
• A must when installing a custom air cleaner

V-FACTOR
Chrome Plated EI Support Bracket
Fits Touring models 2008/Later
Replaces HD# 27712-08

Oil Line Fitting,Spec Adapter #6 An To 1/8"Npt Straight #6 Male Aluminum 816-06-02De
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge #6 Oil Line and Oil Line Ends.

• High strength aluminum construction
• ⁹/₁₆-18 thread with 37° taper fits #6 Oil Line Ends found in the fuel section
• NPT for engine, tank and cooler
• Corrosion resistant finish

Goodridge
Electroless Nickel Plated
¹/₈ NPT Straight
(Imported)

Hose End, Custom Hex Fits 5/8 Od, 5/16 & 3/8 Id Chrome W/Worm Clamp

• All gas line and oil hose need some type of end clamp, so if you have to clamp it you might as well make it look good
• The circle grooved hose ends are 6061-T6 aluminum and the worm clamps are stainless steel
V-FACTOR
Chrome Finish Hex style
Fits hose with ⁵/₈ O.D., ⁵/₁₆ & ³/₈ I.D.
Package of 6, (Imported)

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 45 Degree 1/4"Npt 823-06Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
45° to ¹/₄ NPT Adapter

Universal Oil Line Adapter U/W Goodridge Universal Oil Lines 45 Degree 1/8"Npt 823-06-02Sch

• Adapters are crafted from quality chrome steel
• Mate with the female chrome swivel fittings of Goodridge universal -6 oil lines found in the OE it Oil Lines section to assemble complete V-Twin oil lines

Goodridge
45° to ¹/₈ NPT Adapter

Clp,Oil Line Separator 3 Line Uw/Up To 5/8"Od Bss/Vinyl Hose Ball Milled Billet Alum Cp

• Designed to separate & secure oil lines for a professional look
• CNC machined from billet aluminum for strength
• Works with all types of ⁵/₈ oil lines including braided stainless steel, rubber or vinyl
• Split two piece design for easy installation
• Halves secure with a flush mount allen head screw

V-FACTOR
Chrome Plated Ball Milled 3 Line Separator
Fits ⁵/₈ O.D. oil lines
(Imported)

Clp,Oil Line Separator 3 Line Uw/Up To 5/8"Od Bss/Vinyl Hose Smooth Style Billet Alum Cp

• Designed to separate & secure oil lines for a professional look
• CNC machined from billet aluminum for strength
• Works with all types of ⁵/₈ oil lines including braided stainless steel, rubber or vinyl
• Split two piece design for easy installation
• Halves secure with a flush mount allen head screw

V-FACTOR
Chrome Plated Smooth 3 Line Separator
Fits ⁵/₈ O.D. oil lines
(Imported)

Oil Line End, Custom Nickel Fits 3/8" Id Hose To 9/16-18 Male...Goodridge 136-4506E
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for #6 Oil Line and Adapter fittings.

• Ends attach easily yet securely to the oil line
• Steel construction for strength
• Corrosion resistant finish
• The ⁹/₁₆-18 threaded female end is designed to fit with the #6 adapter fittings found in the fuel section (37° sealing taper)

Goodridge
Nickel Plated 45° Bend Line End
(Imported)

Oil Line End,Custom Nickel Fits 3/8" Id Hose To 9/16-18 Male...Goodridge 136-0106E
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with #6 oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for #6 Oil Line and Adapter ittings.

• Ends attach easily yet securely to the oil line
• Steel construction for strength
• Corrosion resistant finish
• The ⁹/₁₆-18 threaded female end is designe to fit with the #6 adapter fittings found in the fuel section (37° sealing taper)

Goodridge
Nickel Plated Straight Line End
(Imported)

Oil Tank Nipple Fitting Cp Uw/Goodridge -6 Oil Hose And Welded-In Tank Fitting
Whether you are installing a round oil tank or adding an oil cooler in a non-traditional place with -6 (dash six) oil line and fittings from Goodridge, you can custom plumb your oiling system with aircraft quality results. See the fuel section for Goodridge -6 Oil Line.

• Steel ends attach easily yet securely to the oil line
• Threaded male fittings have a ¹/₈ -27 NPT thread
• The female fitting is designed for oil tanks that incorporate welded-in type oil fittings with a .380 O.D. and a single upset at the end (similar to what is found on 1986/1999 Softail oil tanks)

Goodridge
Chrome Plated Oil Tank Nipple End
(Imported)

Upper Line Seal Big Twin Evolution 1992/1999 Rpls.Hd#63528-92

• OE style kit includes everything needed for bolt-on oil filtration
• Oil filter measures 3 1/2 long and is threaded 3/4-16

V-FACTOR
Upper Line Seal
Fits Big Twin Evolution 1992/1999
Replaces HD# 63528-92
(Imported)

Oil Filter Fitting Big Twin Evolution 1992/1999 Rpls.Hd#63530-92

• OE style kit includes everything needed for bolt-on oil filtration
• Oil filter measures 3 1/2 long and is threaded 3/4-16

V-FACTOR
Chrome Plated Upper Line Fitting
Fits Big Twin Evolution 1992/1999
Replaces HD# 63530-92
(Imported)

Oil Filter Fitting Bt Evolution 1992/1999 Rpls.Hd#63523-92A

• OE style kit includes everything needed for bolt-on oil filtration
• Oil filter measures 3 1/2 long and is threaded 3/4-16

V-FACTOR
Chrome Plated itting with Seal
Fits Big Twin Evolution 1992/1999
Replaces HD# 63523-92A
(Imported)

Oil & Fuel Line,Braided Ss Custom Use W/Hose End/Worm Clp 6' Long X 3/8"Id X 5/8"Od

• Economical stainless steel wire braid construction
• High temperature fuel and oil line for most applications that do not warrant the expense of Pro-lex ® hose

V-FACTOR
³/₈ I.D. x ⁵/₈ O.D. fuel or oil line (6 foot roll)
(Imported)

Intake Manifold Seal Ring Cv Carb Bt 90/06 Spt 88/06 Rpls Hd 27002-89 M# C9088F5
This 40 mm Keihin CV (Constant Velocity) carburetor intake Manifold Seal Ring is a high quality replacement.Cometic
Spigot Seal (Each)
Fits all Big Twin 1990/2006 & Sportster 1988/2006
Replaces HD# 27002-89

Intake Manifold Adapter Rings Change Manifold From"O"Ring To Late Style Seal Mfg 1133-1301

• Manufactured of heat resistant fiberglass
• Adapter rings are used to convert early O Ring manifolds to a late model rubber band type ring
• Fits in O Ring groove to make wide area for rubber band to seat properly

Rivera
Fits all O ring manifolds
Note: Necessary to use 82905 clamps
Sold in Pairs

Int Manifold Adapter,Flange 45Mm Spigot Carb To 2 Bolt Flange 3"Ctr-Ctr Hs42/018-45
These gas resistant neoprene Intake Maniford Adapters are used to mount Mikuni and Lectron spigot style carburetors. They are available for mounting to a spigot type intake manifold or for mounting to a 2-bolt flange type manifold. Mikuni
lange Type for 45mm carburetor
Elongated bolt holes on 3 centers designed for S & S brand super E or G intake manifold, 1 ⁷/₈ I.D.
Includes clamp, (Imported)

Intake Part,Clamp W/Seal Bt Spt 55/E78 Stainless Steel O Ring Seals..Rpls Hd 27063-57
³/₄ wide stainless steel intake manifold clamps include OEM style machine screw for tightening. V-FACTOR
Stainless Steel clamps with early O Ring seals
Fits Big Twin & Sportster 1955/Early 1978
Replaces HD# 27063-57 & 27060-55
Sold in Pairs, (Imported)

Air Filter Mtg Screws Chrome S & S & Similar 1/4-20X7/8" Button Head Allen 9980-3

• Replace the Phillips head screws on your S & S carburetor's air filter cover with this allen head type kit
• Not only do these make the S & S filter cover look more appealing, they are also easier to work with when it is time to tighten or loosen them
• Kit includes three ¹/₄-20 x ⁷/₈ screws

Colony
Chrome Plated Screw Kit
Fits S & S and similar air filter covers

Mikuni Pilot Jet 45 Fits Hs40,Hsr42,Hsr45,Hsr48 Smoothbore Carbs

• Precision machined from brass for long life
V-FACTOR
Brass Pilot Jet, Size: 45
Fits HS 40, HSR 42, HSR 45 & HSR 48
Package of 5, (Imported)

Mikuni Pilot Jet 32.5 Fits Hs40,Hsr42,Hsr45,Hsr48 Smoothbore Carbs

• Precision machined from brass for long life
V-FACTOR
Brass Pilot Jet, Size: 32.5
Fits HS 40, HSR 42, HSR 45 & HSR 48
Package of 5, (Imported)

Mikuni Main Jet 165 Fits Hs40,Hsr42,Hsr45,Hsr48 Smoothbore Carbs

• Precision machined from brass for long life
V-FACTOR
Brass Main Jet, Size: 165
Fits HS 40, HSR 42, HSR 45 & HSR 48
Package of 5, (Imported)

Mikuni Carb Part,Rebuild Kit Hsr42 & Hsr45 Mikuni Smooth- Bore Carburetors Khs-016
If you have 50,000 miles on your carburetor and are getting 50 miles to the gallon, that means 1000 gallons of gas have flowed through your carburetor. That's equivalent to over 18, 55-gallon drums of gas. It's time for a carb rebuild. Mikuni
Fits HSR-42 & HSR-45 Mikuni Smoothbore carburetors
(Imported)

Mikuni Carb Jet Needle Size 97 Mikuni Hsr42 Smoothbore Carburetors 8Ddy01-97

• Use these genuine Mikuni Main Jets to fine tune your HS-40, HSR-42 or HSR-45 carburetor to the precise specifications of your engine
• Use Jet Needles listed to fine tune your HSR-42 carburetor
• Main Jets and Jet Needles are sold each

Mikuni
Jet Needles, (Size 97)