Mid-USA

Brake Pads,Sbs 543Hlf Style 2 Sportster 1979/1981 Rear Rpls Hd 44099-77 & 43395-80
We offer three types of Brake Pads:

• SBS - High level technology and experience gained through working with all types of brake systems produces these asbestos free disc brake pads.
• Hawk Performance - Brake pads offer world-class braking performance for heavy bikes. This product line combines the quality and fitment of original equipment with unsurpassed stopping power and quiet braking performance.
• V-FACTOR - Non-asbestos brake pads are manufactured from high grade Kevlar/metallic compound that is top of the line and environmentally safe. Super stopping power. Clean, quite and easy on rotors.

SBS
Rear Disc Pad Pair
Fits Sportster 1979/1981 (dual disc)
Replaces HD# 44099-77 & 43395-890
41mm x 63mm

Brake Part,Brake Pad Pin Fl 1972/1984,Fx Spt 1973 8 Pcs Replaces Hd 44124-72. Hw .7003
HARDWARE
Brake Pad Pins (2)
Fits L 1972/1984 & X, Sportster 1973
Replaces HD# 44124-72

Brake Caliper Seal Kit,Front Spt Fx 1974/1977 Front Rpls Hd 44277-74 & 44278-74
Disc brake caliper seal and boot kits are necessary when rebuilding a caliper. V-FACTOR
2 piece kit for front caliper
Fits X, Sportster 1974/1977
Replaces HD# 44277-74 & 44278-74

Brake Caliper Seal Kit,Rear Flt Models 1980/85 Rear Rpls Hd 43945-79 & 43947-79
Disc brake caliper seal and boot kits are necessary when rebuilding a caliper. V-FACTOR
2 piece kit for rear caliper
Fits FLT 1980/1985
Replaces HD# 43945-79 & 43947-79

Brake Caliper Seal Kit,Rear Flt 87/99 All Other Model Late 1987/1999 Rpls Hd 44045-87
Disc brake caliper seal and boot kits are necessary when rebuilding a caliper. V-FACTOR
2 piece kit for rear caliper
Fits FLT 1987/1999 and all other models Late 1987/1999
Replaces HD# 44045-87

Brk Caliper Bleeder Vlv Repair Kit Fix Stripped Bleeder Screw Hole Mfg .7006
Until now a stripped brake caliper bleeder screw meant riders were faced with the very high cost of replacing an entire brake caliper assembly. This unique precision machined two-piece repair kit, is a fast, safe, inexpensive and reliable fix and is available for most caliers in use today.HARDWARE
Caliper Bleeder Screw Repair Kit

Axle Spacer,.986"Lg Chrome St Mdls(Ex Flsts),Fxdwg 00/L* Fr/Lh Rpls Hd 43683-00 .7345C

• High quality chrome plated steel external axle/wheel hub spacers are made to exact OEM specifications, but look a whole lot better
• Spacers O.D. measure 1.125 and are designed for ³/₄ O.D. axle

HARDWARE
Chrome Plated, .986 length
Fits front left on XSTS, XSTD, LST, LSTC & Dyna Wide Glide 2000/Later
Replaces HD# 43683-00

Wheel Hub Part,Brng Shim .004 Flt Mdls 82/99 Bt Spt 92/99 Replaces Hd 43293-82 Mfg.2267
HARDWARE
Wheel Bearing Shims
.004 thick, Package of 10
Fits FLT models 1982/1999 & Big Twin, Sportster 1992/1999
Replaces HD# 43293-82

Wheel Hub Part,Brng Shim .008 Flt Mdls 82/99 Bt Spt 92/99 Replaces Hd 43292-82 Mfg.2266
HARDWARE
Wheel Bearing Shims
.008 thick, Package of 10
Fits FLT models 1982/1999 & Big Twin, Sportster 1992/1999
Replaces HD# 43292-82

Bearing & Race Timken See Oem# For Uses Rpls Hd.9052
Timken
Bearing & Race Set
Fits Big Twin 4 speed 1958/1986 (except Softail)
Front hub fits X (except XS), Sportster 1974/1999 (except XLCR 1977)
Front & rear hub fits L, XWG & rear hub X & Sportster 1973/1999
Replaces HD# 9052

Wheel Hub Part,Ctr Spacer Wh 4.448"Long Use Same Color Rpls Hd43606-78 Mfg .7156

• Spacers for use without shims
• Color coded for length and machined to close tolerance
• These wheel hub bearing spacers are exact copies of the OEM parts
• Used to set the correct bearing end play on all disc brake wheel hubs without using shims
• Use these spacers with wheels that require a fixed length center spacer
• All hub center spacers sold each

HARDWARE
White without flanges
4.448 long, Replaces HD# 43606-78

Wheel Hub Part,Ctr Spacer Orn 4.420"Long Use Same Color Rpls Hd43604-78 Mfg .7154

• Spacers for use without shims
• Color coded for length and machined to close tolerance
• These wheel hub bearing spacers are exact copies of the OEM parts
• Used to set the correct bearing end play on all disc brake wheel hubs without using shims
• Use these spacers with wheels that require a fixed length center spacer
• All hub center spacers sold each

HARDWARE
Orange without flanges
4.420 long, Replaces HD# 43604-78

Sealed Wheel Bearing, 25Mm Fits All 25Mm Application Single Row Bearing, Hd9276
Single Row (Sealed) Wheel Bearing with 25mm I.D.
Replaces HD# 9276

Brake Disk,10" O.D. Fl/Fx (Rr) 78/80,Fl (Fr) 78/84 Rpls Hd 41813-79

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Solid 10 O.D. & 2 I.D. Disc with indented mount surface
B mount hole style & 3/8 bolt size
Fits L, X Rear 1971978/1980, L ront 1978/1984
Replaces HD# 41813-79
Replaces HD# 41807-73 when used in conjunction with 58325 disc spacer (see the wheel section for spacer)
(Imported)

Brake Rotor, Drilled Ss 11.5" Fx XL Front 74/77 Ss Rpls Hd 41807-74

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled Stainless Steel 11 1/2 O.D. Disc
Fits X, Sportster ront 1974/1977
Replaces HD# 41807-74
(Imported)

Axle Nut Cover Kit,Rear Cp All Dyna Models 1991/1999 Chrome Plated Billet Aluminum
Detail your rear axle bolt and nut with this chrome axle nut cover kit. Machined from billet aluminum and chrome plated to a high luster finish, these axle nut covers highlight the rear axle and hide the adjustment slot. After careful trimming of the axle nut cotter pin, these covers are held in place with bottom mount set screws. Truly the finishing touch to the swingarm.V-FACTOR
Chrome Plated Kit
Fits all Dyna models 1991/1999
(Imported)

Axle Spacer,Washer Flt Model 82/99 Fxr 82/L Rpls Hd 43650-82 Mfg.7278
HARDWARE
Spacer Washer
Fits FLT & FXR 1982/1999
Replaces HD# 43650-82

Axle Spacer,Rear Left Side Bt 4 Spd 73/85 Rr Chain Chrome Rpls Hd 41595-73 Mfg.7148C

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

HARDWARE
Chrome Plated .835 long Non-Stepped Axle Spacer
Fits L 4 speed with rear chain 1973/1985, X, XWG 1973/1983, XE, XST 1984/1985, XE 80ci 1981/1985, L 1973/1982
Replaces HD# 41595-73

Rear Axle Adjuster Spacers St 2000/2008 Chrome Plated Rpls Hd 47577-00

• Machined to exact tolerances for correctly aligning the rear wheel
• Also fits aftermarket frames

V-FACTOR
Chrome Plated Spacer Pair
Fits Softail models 2000/2007
Replaces HD# 47577-00
(Imported)

Front Axle W/Spacers & Nut Cp Fits Dyna Narrow Glide 04/05 Oe Style For 1" Bearings

• OE style steel front axles are a direct replacement
• Available as a complete kit with chrome spacer(s), washers and axle nut or just the axle by Fitself
• See the wheel section for axle spacers and axle nut & washer
V-FACTOR
Chrome Plated Axle Kit
Includes spacer(s), nut & washers
Fits XD 2004/2005
(Imported)

Axle,Rear W/Chrome Head Bt 5 Speed Chain & Belt 1980/L Replaces Hd 41110-79A

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

V-FACTOR
Chrome Plated Axle only
Fits FXR 1982/1994, FLT, FLHT & FLHR 1980/1999 - will fit 2000/Later (except FLT 2002/Later) models if using OEM spacers, Softail all models 1986/1999 - will fit 2000/Later (except FLT 2002/Later) models if using OEM spacers, Softail 2000/2006
Replaces HD# 41110-79A
(Imported)

Rim, Chrome Steel 16X3.00 Metal Side Valve 40 Hole Rpls. Hd#43085-81

• High quality chrome plated steel rims
• 40 spoke and 80 spoke styles

V-FACTOR
Chrome Plated Drop Center Rim
Size: 16 x 3.00
40 Spoke Holes
Metal Side Valve Stem
Replaces HD# 43085-81
(Imported)

Wheel, 40 Spoke 16 X 3.00 All 79/99 7/16 X 3/8 Holes Chrome

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hubs
• Includes bearings and seals

V-FACTOR
OE Hub with 40 Spokes
Rear Dual ⁷/₁₆ - ³/₈ lange
Tapered ³/₄ Bearing
16 x 3.00 Size
Fits all models 1979/1999
(Imported)

60 Spoke 16" X 3.50" Wheel Bt 73/84 Dual Flange 7/16"Hub Billet Hub

• Drop center steel rims
• Chrome spokes
• Custom billet aluminum hubs are show chrome plated
• Includes bearings and seals
• * When replacing models equipped with 19 wheels with these 21 wheels, you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you mush purchase custom shallow back brake calipers

V-FACTOR
Billet Hub with 60 Spokes
Front/Rear, Dual 7/16 lange
Tapered 3/4 Bearing
16 x 3.5 Size
Fits Big Twin 1973/1984

Wheel, 40 Spoke 21 X 2.15 Fxst/Fxdwg 84/99 Sd 5/16 Holes Chrome

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hubs
• Includes bearings and seals

V-FACTOR
OE Hub with 40 Spokes
Front Single ⁵/₁₆ lange
Tapered ³/₄ Bearing
21 x 2.15 Size
Fits XST & XDWG 1984/1999
(Imported)

Wheel, 40 Spoke 19 X 2.5 FX/XL 84/99 Dd Chrome

• Drop center steel rims
• Chrome spokes
• Available with OE chrome hubs
• Includes bearings and seals

V-FACTOR
OE Hub with 40 Spokes
Front Dual flange
Tapered ³/₄ Bearing
19 x 2.5 Size

1984-1999 FX, XL 

Braided Ss Brake Hose,10Ft,-2 Uw/Goodridge -2 Fittings Cut To Length Mfg#600-02-10

• The small O.D. (.200) of this -2 (dash two) brake hose provides a firmer feel at the brake lever and is easier to run through the handlebar if desired
• or best results use our 40202 ferrule installation tool
• See below for compatible fittings

Goodridge
-2 Braided Stainless Steel Non-Coated Brake Hose
10 oot Roll, (Imported)

Universal Clear Coat #3 Hose 68" Dot Approved Brake Line Braided Ss Mfg# Pd6800

• Efficient and economical brake line solution to any bike
• Meets DOT and TUV specifications, allowing road usage worldwide
• Hose features clear PVC coating, PTE inner liner, and premium stainless steel braided armor
• PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
• PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158^o to 500^o, and shields brake systems from moisture, unlike other materials like nylon
• Stainless steel braid is superior in pressure rating, frame resistance, and volumetric expansion to all other materials, including Kevlar^®, resulting in unmatched stopping powerHARDWARE
  Clear Coated #3 Braided Stainless Steel 68 Brake Hose