Name: Brake Hose Asy,Clear Coat Chrome #3 Hose W/Female Ends Use W/Fittings 23"Long R58072S
Brand: Mid-USA
SKU: MID-49635
Price: 33.16 USD
Availability: InStock

Mid-USA

Brake Hose Asy,Clear Coat Chrome #3 Hose W/Female Ends Use W/Fittings 23"Long R58072S

MID-49635

$33.16

In Stock

Shipping calculated at checkout.

Brake Hose Asy,Clear Coat Chrome #3 Hose W/Female Ends Use W/Fittings 23"Long R58072S
Russell Cycleflex Universal series incorporates the beauty of quality show chrome with the convenience of fitting and choice backed by the reliability of factory assembly. Cycleflex hose reduces brake line expansion, minimizing brake fade. These universal series hoses are DOT approved. Use our wide selection of #3 adapter fittings and hose lengths to allow precise fitment to your motorcycle if you are replacing stock factory hose or working on a custom brake system. All adapter fittings are chrome plated except brake light switch banjo bolt 45503. Additional brake line fittings are located in the control section.Russell
Clear Coated #3 Braided Stainless Steel 23 Brake Hose with Chrome Ends

Mid-USA

Brake Hose Asy,Rr Clear Coat Dyna Models 1991/1999 Rpls Hd 40956-90 Hd9219-A

MID-49681

$91.92

In Stock

Shipping calculated at checkout.

Brake Hose Asy,Rr Clear Coat Dyna Models 1991/1999 Rpls Hd 40956-90 Hd9219-A
Upgrade your existing brake lines with these Clear Coat braided stainless steel brake lines. Unlike the OE rubber brake lines that expand under pressure and give you a spongy brake feel, these braided stainless steel covered brake lines retain flexibility while eliminating pressure expansion and providing a positive brake feel. To enhance their good looks and protect the braided portion of the brake line from rubbing against any other parts, a Clear Coat has been applied. This Clear Coat is UV resistant to help prevent yellowing or hardening from weather. All ends, junctions and brake tees are chrome plated for years of corrosion resistant good looks. All measurements are given in total length, end to end. To aid in brake line identification, the brake line ends and junctions are identified below.Goodridge
Dyna Rear. Dyna models 1991/Later. Ends & K. Junction O. Includes two 10mm banjo bolts with washers. 20. (Imported)

Mid-USA

Brake Hose,#3 Braided 4'Roll Use W/Goodridge Reusable Brake Fittings & All Brake Fluids

MID-49520

$13.69

In Stock

Shipping calculated at checkout.

Brake Hose,#3 Braided 4'Roll Use W/Goodridge Reusable Brake Fittings & All Brake Fluids
Goodridge cut to length #3 braided stainless steel brake/hydraulic clutch hose is designed to outperform the OE style rubber hose by not expanding under pressure. It will give you a more positive feel at the lever while providing a greater degree of safety. or improved fluid transfer, the smooth bore inner liner is made of P.T..E. (the same slick material used on frying pans) and is compatible with any type of brake fluid. All parts in this system are reusable, easy to assemble and chrome plated unless indicated otherwise. All reusable ends include a brass ferrule. Use tool 40200 to simplify installation of the brass ferrule.Goodridge
Non-Coated Braided Stainless Steel Hose
4 oot Roll, (Imported)

Mid-USA

Brake Hose,#3 Braided 25'Roll Use W/Goodridge Reusable Brake Fittings & All Brake Fluids

MID-49519

$119.45

In Stock

Shipping calculated at checkout.

Brake Hose,#3 Braided 25'Roll Use W/Goodridge Reusable Brake Fittings & All Brake Fluids
Goodridge cut to length #3 braided stainless steel brake/hydraulic clutch hose is designed to outperform the OE style rubber hose by not expanding under pressure. It will give you a more positive feel at the lever while providing a greater degree of safety. or improved fluid transfer, the smooth bore inner liner is made of P.T..E. (the same slick material used on frying pans) and is compatible with any type of brake fluid. All parts in this system are reusable, easy to assemble and chrome plated unless indicated otherwise. All reusable ends include a brass ferrule. Use tool 40200 to simplify installation of the brass ferrule.Goodridge
Non-Coated Braided Stainless Steel #3 Hose
25 oot Roll, (Imported)

Mid-USA

Speedometer,Rear Whl Sensor Use W/2000 Series Spdo,Sensor Mt On Rr Axle Spacer, Rig/St

MID-48622

$135.00

In Stock

Shipping calculated at checkout.

Speedometer,Rear Whl Sensor Use W/2000 Series Spdo,Sensor Mt On Rr Axle Spacer, Rig/St

2000 Series
Can be used with carbureted or fuel injected models
Includes mounting hardware for use with stamped steel type dash 1947/1967 or die cast type dash 1968/Later
Push-button speedometer calibration for when final drive ratio or tire diameter has been altered
Works with electronic or 12 volt point type ignition systems with single or dual fire coil
Built-in speed output signal for models equipped with an automatic turn signal cancel module or cruise control
Display intensity can be reduced for night time use if a remote switch is installed
Maximum speed readout is 255 MPH
Maximum odometer readout is 99,999.9 and the maximum tripometer readout is 999.9
Super bright fluorescent teal green displays are easy to see in direct sunlight
Includes 18 speed adapter 48618 for use with 1996/Later models equipped with electronic speed sensor
Includes non-glare scratch resistant lens with chrome trim ring
2 year warranty against manufacturer defects
Includes instructions

Note: Speedometers for 1995/Later models can be used with the OE transmission sensor when used with the included adapter. All other applications require a specialized sensor listed below.

Display Features:

Quick response bar graph type tachometer with adjustable shift point indicator (can be used on engines with 1 to 15 cylinders)
The tachometer functions between 350 & 8,000 RPMs
Resetable countdown service meter (with warning)
Hour meter
Includes a feature to recall your high speed and RPM
unctions include 0-60 MPH timer, ¹/₄ mile timer and ¹/₄ mile speed
Integrated Voltmeter (with low voltage warning)
Includes following indicators: turn signal, high beam, neutral, security warning, gear position indicator (compatible with 3/6 speed transmissions), adjustable RPM warning indicator with an output for an external shift light, low oil pressure, wait to start (for fuel injected models) and check engine (for fuel injected models)

Dakota Digital

¹/₈

Mid-USA

Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89

MID-48270

$4.40

In Stock

Shipping calculated at checkout.

Speedometer Seal For Fatbob Speedo 68/95 Rpls Hd 67190-89
V-FACTOR
Rubber Damper
Fits 1968/1995 with cast dash
Replaces HD# 67190-89
(Imported)

Mid-USA

Rubber Dash & Oil Tank Mount FXs FXef FXb 77/84,5/16"-18 Stud W/5/16-18 Female,50235-63

MID-48265

$7.10

In Stock

Shipping calculated at checkout.

Rubber Dash & Oil Tank Mount Fxs Fxef Fxb 77/84,5/16"-18 Stud W/5/16-18 Female,50235-63

Designed to help isolate the vibration that is transmitted to the oil tank
Also used for battery carrier trays, instrument dash panels and custom oil tanks
All mounts are made with an exclusive rubber compound and feature heat-treated steel studs that exceed OEM specifications
Heavy-duty mounts are absolutely the strongest available with their superior tensile strength, shear resistance and anti-sag qualities
Mount bodies are 1 long x 1 O.D.
Manufacturer's 2 year warranty
Sold Each

D&S Performance
Standard Duty, Thread Size & Length: 5/16-18 x 1/4 emale & 5/16-18 x 1/2 Male
Replaces HD# 50235-63

Mid-USA

Ins Panel Hrdw,Mt Screw & Stud BT 47/67 2 Or 3 Light Panel Rpl Hd 71067-47 & 71075-47

MID-48202

$11.20

In Stock

Shipping calculated at checkout.

Ins Panel Hrdw,Mt Screw & Stud Bt 47/67 2 Or 3 Light Panel Rpl Hd 71067-47 & 71075-47
V-FACTOR
Complete Kit with chrome cover screw
Fits Big Twin 1947/1967 2 & 3 light stamped steel style instrument panels
Also fits 48125 smoothie dash cover found in the control section
Replaces HD# 71067-47 & 71075-47
(Imported)

Mid-USA

Dual 2 5/8" Gauge Bracket Fits 1-1/4" T-Bars,Flat Mount Polished Billet Alum 9084Md

MID-48153

$163.35

In Stock

Shipping calculated at checkout.

Dual 2 5/8" Gauge Bracket Fits 1-1/4" T-Bars,Flat Mount Polished Billet Alum 9084Md

Designed for use with our Pro-Cycle by Autometer tachometers and speedometers found in the control section, but can also be used with other brands that have a 2 ⁵/₈ cup size
Includes internal O-ring for clampless gauge mounting
CNC machined from billet aluminum
See the control section for longer riser clamp bolts with spacers

Cycle Performance
Polished Dual Gauge
Fits custom T-Bars with 1 ¹/₄ O.D. pullback risers
lat angle, 3 ¹/₂ mounting centers

Mid-USA

Instrument Panel Kit,L Style Softail 1996/1999 & Dyna Wide Glide 1996/1998 W/Hardware

MID-48131

$173.95

In Stock

Shipping calculated at checkout.

Instrument Panel Kit,L Style Softail 1996/1999 & Dyna Wide Glide 1996/1998 W/Hardware

One simple kit supplies you with everything needed (except the speedometer) for a late style instrument panel
Die cast instrument panel (Replaces HD# 71254-96) is a faithful reproduction of the original and includes a stick-on ignition switch name plate and a lens strip for the indicator bulbs and 5 light sockets with 8 wire leads
This is a plug-in style ignition switch with round type keys and all necessary mounting hardware is also included as shown

V-FACTOR
Chrome Plated Kit
Fits Softail 1996/1999 & XDWG 1996/1998
(Imported)

Mid-USA

Custom Smoothie Ins Panel Cvr Fatbob Gas Tanks W/Large Spdo W/O Ins Light & Ign Sw Holes

MID-48125

$53.00

In Stock

Shipping calculated at checkout.

Custom Smoothie Ins Panel Cvr Fatbob Gas Tanks W/Large Spdo W/O Ins Light & Ign Sw Holes

Dash cover features indicator lights
Ignition switch holes have been removed for that clean custom look

V-FACTOR
Chrome Plated Dash Cover
Fits over large at Bob style speedometer with 2 light, 3 light or late model instrument baseplate and 2 piece at Bob style gas tanks
(Imported)

Mid-USA

V-Factor Custom Mini Tachometer, Black Face, 8000 RPM, 12V

MID-48047

$69.95

In Stock

Shipping calculated at checkout.

Encased in all stainless steel body that is 1 7/8" O.D. x 1 3/4" long, with a 2 1/8" O.D. x 1/4" thick bezel
A glass lens covers a 1 5/8" face
Illuminated with a 12 volt bulb and includes two feet of lead wire
Includes mounting bracket with 5/16" mounting hole and installation instructions

V-FACTOR
Stainless Steel with Black Face
Reads up to 8,000 RPM
Fits custom applications (12 volt)

Mid-USA

Custom Mini Speedo,2:1 Ratio FX,FXR 1973/1990,Spt 1973/1990 W/Fr Whl Dr Ss Case Cp Hrdw

MID-48007

$58.00

In Stock

Shipping calculated at checkout.

Custom Mini Speedo,2:1 Ratio Fx,Fxr 1973/1990,Spt 1973/1990 W/Fr Whl Dr Ss Case Cp Hrdw

Chrome Plated reinforced handlebar clamp with a rubber insulator to minimize vibration
Designed to fit most bikes with stock length forks without any adapters or modifications
Instrument measures 2 ⁵/₈ O.D. by 2 ¹/₁₆ deep
140 MPH face

V-FACTOR
Stainless Steel Gauge with Chrome Plated Clamp & 2:1 Ratio
Fits X, FXR 1973/1990 & Sportster 1973/1990 with front wheel drive
No cable included, (Imported)

Mid-USA

Speedometer, Fat Bob 2:1 16Mm Fl 47/67 Fl FX FXR XL 81/84 Bullseye Face

MID-48017

$64.70

In Stock

Shipping calculated at checkout.

Speedometer, Fat Bob 2:1 16Mm Fl 47/67 Fl Fx Fxr XL 81/84 Bullseye Face

120 MPH faces
Will fit all at Bob instrument panels with dash mounted speedometers
Designed for use with 12 mm or 16mm speedometer cable nut as listed below
Requires 48235 tripometer reset knob (not included)

Note: These speedometers do not incorporate the circuitry required for models with self-cancelling turn signals.V-FACTOR
1946/1947 ace style, 2:1 drive ratio
Fits transmission drive L 1947/1967, front wheel drive L, X, FXR & Sportster 1981/1984 (except Softail & XWG) for 16mm Cable (Imported)

Mid-USA

Mirror,W/Run & Turn LED Lights All Oe Mounts,Left Hand,Chrome Through Mirror LED Turn Signal

MID-47083

$97.80

In Stock

Shipping calculated at checkout.

Mirror,W/Run & Turn LED Lights All Oe Mounts,Left Hand,Chrome Through Mirror LED Turn Signal

The front side of these mirrors have a clear style lens with extra heavy duty LEDs, which operate as a running light and turn signal
Also includes three red through mirror turn signal LEDs on the mirror side
eatures true view flat mirrors so objects appear exactly as they are
Mirror head is 5 ¹/₂ wide and 2 ¹/₂ tall at tallest point
Stem measures 6 ¹/₄ long
Includes 24 of wire
CNC machined from billet aluminum
Includes mounting hardware

V-FACTOR
Chrome Plated Left Side only with Lights
Fits all Big Twin & Sportster models

Mid-USA

Mirror,W/Run & Turn LED Lights All Oe Mounts,Right Hand,Cp Through Mirror LED Turn Signal

MID-47082

$99.75

In Stock

Shipping calculated at checkout.

Mirror,W/Run & Turn LED Lights All Oe Mounts,Right Hand,Cp Through Mirror LED Turn Signal

The front side of these mirrors have a clear style lens with extra heavy duty LEDs, which operate as a running light and turn signal
Also includes three red through mirror turn signal LEDs on the mirror side
eatures true view flat mirrors so objects appear exactly as they are
Mirror head is 5 ¹/₂ wide and 2 ¹/₂ tall at tallest point
Stem measures 6 ¹/₄ long
Includes 24 of wire
CNC machined from billet aluminum
Includes mounting hardware

V-FACTOR
Chrome Plated Right Side only with Lights
Fits all Big Twin & Sportster models

Mid-USA

Skull Mirrors W/Flames,Black

MID-47057

$107.45

In Stock

Shipping calculated at checkout.

Skull Mirrors W/Flames,Black

Show quality flaming skull mirrors add an attention getting look to your bike
Sold in sets with a left and right mirror
Mirror face is 4 1/2 wide x 2 3/4 tall
Total installed height is 5

V-FACTOR
Chrome Skull with Black lames & Chrome Highlights

Mid-USA

Tapered Mirror,Right,Black Fits All Mdls 1965/Later* Short Stem Rpls Hd 91982-03B

MID-47044

$29.95

In Stock

Shipping calculated at checkout.

Tapered Mirror,Right,Black Fits All Mdls 1965/Later* Short Stem Rpls Hd 91982-03B

Custom tapered mirrors in finishes listed below
Offered in left or right hand fitment as listed
No rear fasteners for a clean look

V-FACTOR
Black Right Mirror, Short Stem
Fits all models 1965/Later
Replaces HD# 91982-03B

Mid-USA

Rectangular Mirror Right Side All Oe Mounts Chrome Steel 5" Stem Flat Tinted

MID-47012

$27.80

In Stock

Shipping calculated at checkout.

Rectangular Mirror Right Side All Oe Mounts Chrome Steel 5" Stem Flat Tinted
These rectangular mirrors feature a one piece stem and flat tinted non-glare glass lens.V-FACTOR
Chrome Plated Right Side with 5 Stem
Fits all Big Twin & Sportster models in OE mount location
Replaces HD# 91875-82TA

Mid-USA

Rectangular Mirror Left Side All Oe Mounts Chrome Steel 5" Stem Flat Tinted

MID-47011

$27.80

In Stock

Shipping calculated at checkout.

Rectangular Mirror Left Side All Oe Mounts Chrome Steel 5" Stem Flat Tinted
These rectangular mirrors feature a one piece stem and flat tinted non-glare glass lens.V-FACTOR
Chrome Plated Left Side with 5 Stem
Fits all Big Twin & Sportster models in OE mount location
Replaces HD# 91892-82TA

Mid-USA

Brake Part, Banjo Bolt 3/8-24 Double Banjo Bolt Black #P773-03Bk

MID-46009

$11.84

In Stock

Shipping calculated at checkout.

Brake Part, Banjo Bolt 3/8-24 Double Banjo Bolt Black #P773-03Bk

Perfect for custom motorcycles
Stainless steel hose features PVC outer coating and PTE inner liner
Ideal for routing brake lines through concealed places like handlebars, fork legs, and frames
Made to ride hard and are easily assembled

HARDWARE
Straight itting
³/₈-24 double banjo

Mid-USA

Steel Forward Controls, Chr Sportster 1987/2003 With Pegs

MID-45853

$377.00

In Stock

Shipping calculated at checkout.

Steel Forward Controls, Chr Sportster 1987/2003 With Pegs

Move your feet forward to a more comfortable position
Available as shown with Comfort Ride footrests as well as Comfort Ride extended length brake and shifter toe pegs, or without footrests and toe pegs
Steel construction
Use ⁵/₈ I.D. female mount footrests of your choice for kits without pegs

V-FACTOR
Chrome Plated Kit with Pegs
Fits Sportster 1987/2003
(Imported)

Mid-USA

Pro II Sys Brk Fitting Strt Cp Uw #49510 Brake Hose 7/16-24 Male Thread Russell R4343C

MID-45777

$21.40

In Stock

Shipping calculated at checkout.

Pro II Sys Brk Fitting Strt Cp Uw #49510 Brake Hose 7/16-24 Male Thread Russell R4343C

Russell's Pro System II hose and fittings are designed for custom builders that need to easily fabricate brake or hydraulic clutch lines
The cut to length semi-rigid black nylon hose has a ³/₁₆ O.D. for a low impact custom look yet provides improved braking effect with the same lever pressure as OE size hose. Hose is not DOT approved
The chrome plated steel compression fittings (sold separately) are available to replace ³/₈-24 & ⁷/₁₆-24 banjo bolts as listed. The ¹/₈-27 NPT compression fittings are designed for early style or custom brake hoses drilled and tapped for pipe thread
The 45870 male adapter end is designed for use with -3 male adapter banjo ends or brake tees found in the control section when required

Russell
⁷/₁₆-24 Straight itting
Replaces ⁷/₁₆ Banjo
Not designed for Sportster models 2004/Later

Mid-USA

Banjo Bolt Crush Washer Fits 10Mm Banjo Bolts,Aluminum Rpls Hd 41731-82 R49005

MID-45767

$5.14

In Stock

Shipping calculated at checkout.

Banjo Bolt Crush Washer Fits 10Mm Banjo Bolts,Aluminum Rpls Hd 41731-82 R49005
Available in your choice of material to cure any sealing problem you may encounter.HARDWARE
Aluminum 10 mm crush washers
Package of 10
Replaces HD# 41731-82

Mid-USA

Brake Part,Adapter Fitting 10Mm Banjo #3 Male,90 Degree Chrome Plated Mfg# Pf10B90

MID-45737

$9.91

In Stock

Shipping calculated at checkout.

Brake Part,Adapter Fitting 10Mm Banjo #3 Male,90 Degree Chrome Plated Mfg# Pf10B90

Efficient and economical brake line solution to any bike
Meets DOT and TUV specifications, allowing road usage worldwide
Hose features clear PVC coating, PTE inner liner, and premium stainless steel braided armor
PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158^o to 500^o, and shields brake systems from moisture, unlike other materials like nylon
Stainless steel braid is superior in pressure rating, frame resistance, and volumetric expansion to all other materials, including Kevlar^®, resulting in unmatched stopping powerHARDWARE
Chrome Plated 90°, 10 mm, 2 length #3 Adapter itting

Mid-USA

Brake Part,Adapter Fitting 10Mm Banjo #3 Male Straight Black, Goodridge #592-03Bk

MID-45752

$13.14

In Stock

Shipping calculated at checkout.

Brake Part,Adapter Fitting 10Mm Banjo #3 Male Straight Black, Goodridge #592-03Bk

Universal brake lines are the perfect solution for any brake or clutch line fitment for any bike
Hose features clear or black PVC coating, PTE inner liner, and premium stainless steel braided armor
PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158 degrees to 500 degrees, and shields brake systems from moisture, unlike other materials like nylon
Stainless steel braid is superior in pressure rating, flame resistance, and volumetric expansion to all other materials, including Kevlar, resulting in unmatched stopping power
All hardware is beautifully chromed mild steel with a 96 hour salt spray rating
Best when used with Goodridge universal adapters Goodridge
Black 10 mm, 2 tall #3 Adapter itting
(Imported)

Mid-USA

Front Master Cyl Cover Gasket Dresser Models 2008/Later* Rpls Hd 42857-06B

MID-45488

$7.90

In Stock

Shipping calculated at checkout.

Front Master Cyl Cover Gasket Dresser Models 2008/Later* Rpls Hd 42857-06B
V-FACTOR
Fits Dresser models 2008/Later
Sold Each, (Imported)
Replaces HD# 42857-06B

Brand

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Join the K and G Cycles family of friends