Mid-USA

Oe Style Front Fender,Raw Stl Flt Models 00/L*,No Trim Holes Replaces Hd 59093-00

• High quality steel OE style replacement fenders for listed models
• Available drilled for tips and side spears or smooth undrilled as listed

V-FACTOR
Raw Steel Undrilled ront ender
Fits FLT 2000/2013
Replaces HD# 59093-00
(Imported)

Sportster Rear Fender Fits Sportster 1982/1993 Replaces Hd# 59674-81A

• High quality replacement rear fenders for Sportsters listed

V-FACTOR
Rear ender
Fits Sportster 1982/1993
Replaces HD# 59674-81A

Oe Style Front Fender Flhx,Fltr 2000/2013 Uw 16"Wheel,Rpls Hd 59045-00B

• High quality, sturdy all metal construction
• Dresser style fender adds a classic touch to the 16 front wheel on Wide Glide front ends

V-FACTOR
Raw Steel Unpainted ront ender
Use with 16 wheel
Fits FLHX, FLTR 2000/Later
Replaces HD# 59045-00B

Horn,Springer Style 12V Chrome W/Universal Mount Any 12V Use Replaces Hd 69005-85T

• 6 or 12 volt horn provides a nostalgic look to the modern motorcycle
• Universal mount on 1 1/8 centers can be rotated 360° for exact placement
• 5 1/4 O.D. just like the original
• 4 AMP draw

V-FACTOR
Chrome Plated 12 Volt Horn
Replaces HD# 69005-85T

Turn Signal Mount,Rear 9" Long Fl 4Spd 74/84 Flst/C 86/06 Flt 91/06,Cp Stl,Rpls Hd 68510-74C

• Available in the standard 13 length as an OE style replacement when using saddlebags or the shorter 9 or 8 1/4 version that works great when the saddlebags have been removed
• See below for availability of construction (OE style die-cast aluminum or high mileage vibration resistant steel)

V-FACTOR
9 Chrome Plated Steel
5 7/8 ender Mount Width
Fits L 4 speed 1974/1984, LST/C 1986/2006 & FLT 1991/2006
Replaces HD# 68510-74C

Steel License Plate Brkt,Black Touring Models 2009/Later* Rpls Hd 69380-09Bhp

• High quality steel license backing plate in finishes as listed
• Replace the stock factory plastic part that is prone to cracking

V-FACTOR
Black Steel Bracket
Fits Touring Models 2009/Later
Replaces HD# 69380-09BHP

Curved License Plate Frame,Blk Touring Models 2010/Later* Rpls Hd 67900058

• These curved license plate frames are shaped to hug the contour of the rear fenders of Touring models
• Replaces the OEM frame and requires no re-wiring or drilling

V-FACTOR
Black Finish
Fits Touring models 2010/Later
Replaces HD# 67900058

Headlight Bracket,Chrome Plt V-Rod 02/L* & Custom App Rpls Hd 68884-01

• Complete headlight assembly manufactured from aluminum
• Black housing is manufactured from high-impact black plastic
• Includes an H11 low beam & H9 high beam bulbs
• Also available is a black or chrome headlight bracket to complete the job
• Mix the finishes for a unique custom look

V-FACTOR
Headlight Bracket with Chrome Finish
Fits V-Rod 2002/Later & custom applications
Replaces HD# 68884-01

Headlight Connector W/12"Wire Fit All 6V& 12V Headlights W/3 Pin Spade Terminals W/12" Wire

• Individual parts for Headlight Housing assembly

V-FACTOR
Replacement Headlight Connector with 12 wires
Fits L & L 4 speed 1960/1984, FXRT 1982/Later, FLHT 1983/Later, FLHS 1987/1993
Replaces HD# 67753-60

Seal Beam Headlight 7"Od 65/35 Watts Halogen 12V Dot Approved Rpls Hd 67717-64 M# 6024
Economically priced sealed beams with nonreplaceable bulbsWagner Lighting
7 Headlight, sealed beam halogen bulb, 12 volt, 65/35 watts, DOT Approved
MG# 6024

Skull Taillight Lens Red/Clear Skull Cat Eye Taillight With 4-1/2" Mt Holes Red Bulb/Led

• Transform your ordinary cateye taillight into a unique eye catcher with minimal cost
• Inside of lens in faceted to improve light dispersement
• Mounts with existing hardware
• Designed for the standard cateye taillight with lens that mounts on 4 ¹/₂ centers including our 11201, 11219 or 11223
• Must be used with red incandescent bulb or red LED's (except 11778)

V-FACTOR
Plastic Red Lens with White Skull

Headlight Retainer Ring Fl60/84,Flt 80/L* Flhr 94/L* 3/4"Deep Rpls Hd 67726-71

• Individual parts for Headlight Housing assembly

V-FACTOR
Chrome Plated Retaining Ring for Sealed Beam, ³/₄ deep
Fits L & L 4 speed 1960/1984, FXRT 1982/Later, FLHT 1983/Later, FLHS 1987/1993
Replaces HD# 67726-71
(Imported)

Taillight Lens, Round Fits Sparto Style Taillight Uw #11246 L.E.D. Taillight

• Provides the bobber look of years gone by
• 11250 and 11262 include license plate bracket for easy mounting of 7 x 4 license plate
• The 12 volt taillights are available with your choice of a standard automotive #1157 incandescent bulb or with 12 individual LED lights
• Made from cast aluminum
• Includes rubber mounting gasket and hardware

V-FACTOR
Replacement faceted style taillight lens

Taillight Lens Oe Style St 00/E03(Ex Fxstd Flsts),Flt, Dyna,Spt 99/E03 Rpls 68140-99A

• Direct replacement for OE style taillight lens
• Includes built-in reflector & mounting gasket
• See the electric section for taillight bulb

V-FACTOR
Fits Softail 2000/Early 2003 (except XSTD & LSTS), FLT, Dyna & Sportster 1999/Early 2003
Replaces HD# 68140-99
(Imported)

Gasket, Taillight Mount Fits MostHarley Mdls 73-98 Dense Foam, Rpls Hd# 68123-73

• Dense foam material, 3/16 thick

V-FACTOR
Dense oam Gasket (sold each)
Fits most models 1973/1998
Replaces HD# 68123-73

Taillight Lens Red Tombstone Big Twin 1974/1954 Plastic Replaces Hd 68090-47T
Available in your choice of the bulb type or the LED (light emitting diode) type. The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb. The LED type uses 45 red LEDs for the brake/taillight and three blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredible life span. The LEDs do not produce any power robbing heat and draw only 4.5 watts of power as opposed to the 29.4 watts of power that the incandescent bulb draws. These 12 volt taillights feature a die cast housing and include a rubber fender gasket. License mount and hardware is also included.

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Replacement Red Taillight Lens
Fits Big Twin 1947/1954 & custom applications
Replaces HD# 68090-47T, (Imported)

Bullet Turn Signal,Bulb Type Front/Rear, Single Function Chrome Housing,Amber Lens

• These custom 2 3/8 O.D. bullet style turn signals are offered in amber lens but are easy to change. See replacement lenses below
• Available in bulb or LED as listed below
• Measure 3 1/2 long and are threaded 5/16-18 and include 18 of lead wire
• Non-fluted lenses snap in place for easy bulb changes and meet DOT specifications
• Sold each

V-FACTOR
Front/Rear Style Mount
Chrome Plated with Amber lens
Single ilament Incandescent bulb Style

Turn Sig/Running Lt Amber Lens Fl 63/85,Fx 71/E 73,Fxrt 83/85 Single Filament Hd 68557-70A

• 12 volt Turn Signal Light Assembly is chrome plated die cast just like the original and is wired with a single filament bulb for front or rear fitment
• Amber lens turn signals can be used on the front or rear of the motorcycle

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Light Assembly
Amber Lens, Single ilament
Fits L 1963/1985, X 1971/Early 1973 & FXRT 1983/1985
Replaces HD# 68557-70A
(Imported)

Maltese LED Marker/Running Lt Custom Use,Cnc Billet Aluminum 2-1/4" X 2-1/4" X 3/4" Deep Cp

• Can be used as running lights and supplemental brake lights
• Measures 2 1/4 long x 2 1/4 wide x 3/4 deep
• 17 of lead wire
• Includes 5/16 through-bolt for mounting

V-FACTOR
Chrome Plated Set

Bullet Marker Light Amber Lens Dual Filament 12 Volt Chrome Plated

• A beautiful copy of theHarley-Davidson^® old style marker lights with 12 volt bulb and hidden wire mounting base
• Includes rubber mounting gasket and ⁵/₁₆ mounting stud with nut
• See below for availability of bulb and lens color

V-FACTOR
Chrome Plated Complete Assembly with dual filament bulb & amber lens
(Imported)

Bullet Marker Light Red Lens Dual Filament 12 Volt Chrome Plated

• A beautiful copy of theHarley-Davidson^® old style marker lights with 12 volt bulb and hidden wire mounting base
• Includes rubber mounting gasket and ⁵/₁₆ mounting stud with nut
• See below for availability of bulb and lens color

V-FACTOR
Chrome Plated Complete Assembly with dual filament bulb & red lens
(Imported)

Skull Cateye Taillight Univ Mt W/Clear Skull/Red Lens Cp Die Cast 4 Step Housing

• LED type taillight includes 33 red LEDs for the brake/running light function and 6 separate white LEDs to illuminate the license plate
• Die cast housing features a four step design
• lat backed housing for custom use mounts on 2 centers

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Skull Cateye Taillight (LED type)

5 3/4"Custom Headlight Asy,12V 6"Long W/Bottom Mount & 60/55W Halogen Bulb,Black Powder Coat

• 60/55 Watt Halogen
• This 6 long aluminum assembly features a cam lock style bezel and a lens that meets DOT specifications
• Includes a replaceable H4 style 12 volt 60/55 watt halogen bulb
• Requires a ³/₄ wide male mount

Note: Does not include a high beam indicator and should be used accordinglyV-FACTOR
Matte Black Headlight Assembly

Jims camshaft needle bearing remover and installer tool is required for correct and accurate replacement of the camshaft inner needle bearing for M8 models. This tool holds tighter tolerances which allows for a more precise installation depth. *NOTE: This remover uses the Jims Style remover collet as well as Jims fine threaded installation driver. A new removal holes works as a window to let you see what you're doing while using the tool. 2017-UP FLT 2018-UP FLST 2018-UP FXST

Univ Throttle Cable,Braided 72"Housing,8"Free Length

Volt Tech Alternator Stator 22 amp, unmolded type. Features heavy duty copper windings with plug.

OEM: 29967-89B

XL 1990-2006