Mid-USA

Univ Throttle Cable,Braided 66"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

XL 1991-UP

Univ Throttle Cable,Braided 64"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

FXST 1993-1993
FLST 1993-1993
FLT 1993-1993
FXD 1993-1993
FXR 1993-1993

Univ Throttle Cable,Braided 60"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

FXST 1991-1992
FLST 1991-1992
FLT 1991-1992
FXD 1991-1992
FXR 1991-1992

Replacement Cable Guide Uw Motion Pro Cable Clamps Holds Two Cables Mfg#11-0050
Kit includes 14 tooth gear, oil deflector, washer and nut and contains proper pieces for each application. Fits: XL 1959-1981 UOM: 1 - KIT Country of Origin: Imported

Maintenance Free Battery,12Amp Sportster 2004/Later* 200 Cca,12 Volts, .Ytx14L-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
200 Cold Cranking Amps, 12 Amp Hours
6 Long x 3 ⁷/₁₆ Wide x 5 ³/₄ Tall
Fits Sportster 2004/Later
Terminal Location: - on FLH, + on RH
Replaces HD# 65958-04
MG# YTX14L-BS

Maintenance Free Battery,12V Es Fx 73/86,Fxr 82/L,St 84/90 Spt 79/96,XLcr 77/78 Ytx20-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
* 270 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits FXR 1982/Later, X Electric Start 4 speed 1973/1986, Softail 1984/1990, Sporster 1979/1996, XLCR 1977/1978
Terminal Location: + on FLH, - on RH
Replaces HD# 66672-96
MG# YTX20-BS

Maintenance Free Battery,18Amp St & Dyna 91/L* Spt 97/03 12V Rpls Hd 65989-97 ..Ytx20L-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
270 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits Softail 1991/Later, Dyna 1997/Later, Sportster 1997/2003
Terminal Location: - on FLH, + on RH
Replaces 65989-97
MG# YTX20L-BS

Maintenance Free Battery 12V Flt 97/L* 27.5Ah Power House + Rpls Hd 66010-97 ...Yix30L

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
335 Cold Cranking Amps, 27.5 Amp Hours
6 9/16 Long x 5 Wide x 6 7/8 Tall
Fits FLT, FLHT, including Road King & Road Glide 1997/Later
Terminal Location: - on FLH, + on RH
Replaces HD# 66010-97
MG# YIX30L

Maintenance Free Battery,18Amp Es Fx 73/86,Fxr 82/L,St 84/90 Spt 79/96,XLcr 77/78 Ytx20H-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
* 310 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits FXR 1982/Later, X electric start 4 speed 1973/1986, Softail 1984/1990, Sportster 1979/1996, XLCR 1977/1978
Terminal Location: + on FLH, - on RH
Replaces HD# 66672-96
MG# YTX20H-BS

Maintenance Free Battery 12V Flt 80/96 21Ah Power House + Rpls Hd 66010-82B ..Ytx24Hl-Bs

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
350 Cold Cranking Amps, 21 Amp Hours
8 ¹/₈ Long x 3 ⁷/₁₆ Wide x 6 ³/₈ Tall
Fits FLT, FLHT, FLHR 1980/1996
Terminal Location: - on FLH, + on RH
Replaces HD# 66010-82B
MG# YTX24HL-BS

Maintenance Free Battery,11.2A Cus App, 6" Long, 3-7/16 Wide 4-3/8" Tall, 230 Cca .Ytz14S

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
230 Cold Cranking Amps, 11.2 Amp Hours
6 Long x 3 ⁷/₁₆ Wide x 4 ³/₈ Tall
Fits Custom applications where size matters (Imported)
Terminal Location: + on FLH, - on RH
MG# YTZ14S

Battery Strap,Stainless Steel Fl Flh 1970/1984 Replaces Hd 66383-70A

• 18 gauge stainless steel
• Resist corrosion deposits while securing your battery properly
• Manufactured to meet or exceed OEM specifications

V-FACTOR
Fits L & FLH 1970/1984
Replaces HD# 66383-70A

Battery Tray Mount,Fxe Chromed Fxe 1973/Early 1978 Replaces Hd 66225-73
Exact reproductions of the original equipment battery carrier mounts found on L and XE 4 speed modelsV-FACTOR
Chrome Plated Mount
Fits XE 1973/Early 1978 with Hitachi Starter
Replaces HD# 66225-73

Battery Cover,Wrap Around Cp Fxe Fxwg 4Spd 73/86,Spt 82/03 Dyna 91/96 Rpls Hd 66340-78

• High quality chrome plated stamped steel Wrap Around Battery Covers
• Fit all the OEM applications listed when using the OEM size battery

V-FACTOR
Fits Electric Start XE & XWG 4 speed 1973/1986, Sportster 1982/2003 & Dyna 1991/1996
Replaces HD# 66340-78, (Imported)

Battery Cover,Wrap Around Cp Fxe Fxwg 4Spd 73/86,Spt 82/03 Dyna 91/96 Rpls Hd 66070-83T

• High quality chrome plated stamped steel Wrap Around Battery Covers
• Fit all the OEM applications listed when using the OEM size battery

V-FACTOR
Fits Electric Start XE & XWG 4 speed 1973/1986, Sportster 1982/2003 & Dyna 1991/1996
Replaces HD# 66070-83T
(Imported)

Battery Cover,Wrap Around Cp Fl 4 Spd 1970/1984 - Chromed Rpls Hd 66378-70 & 66074-83T

• High quality chrome plated stamped steel Wrap Around Battery Covers
• Fit all the OEM applications listed when using the OEM size battery

V-FACTOR
Fits L 4 speed 1970/1984
Replaces HD# 66378-70 & 66074-83T
(Imported)

Battery Strap,Stainless Steel Fxe Fxwg 73/86 4 Spd,Spt 82/89 Replaces Hd 66476-73T

• 18 gauge stainless steel
• Resist corrosion deposits while securing your battery properly
• Manufactured to meet or exceed OEM specifications

V-FACTOR
Fits XE & XWG 4 speed 1973/1986 & Sportster 1982/1989
Replaces HD# 66476-73T

Cable Bty Ultra-Flexible Clear 7" Ctr/Ctr 1/4" & 5/16" Holes 4 Gauge Tinned Copper ..78-107

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  7 Individual Cable

Battery Strap,Rubber Black Softail Late 1993/1999 Rpls Hd 66109-93 & 66111-93

• Black rubber straps
• Can install or remove without tools
• Length is measured from hook end to hook end
• See below for availability of one or two piece strap

V-FACTOR
Non-Ribbed Two-Piece, 10 1/2 Long with a Quick Disconnect
Fits Softail Late 1993/1999
Replaces HD# 66109-93 & 66111-93

Cable Bty Ultra-Flexible Clear Flt Mdls 93/L* 2-13"1-8" Cable 4 Gauge Tinned Copper..79-3009

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  Cable Kit
  Includes 13 and 14 Cables
  Fits FLT models 1993/Later

Cable Bty Ultra-Flexible Clear 13" Ctr/Ctr 1/4" & 5/16" Holes 4 Gauge Tinned Copper ..78-113

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  13 Individual Cable

Battery Cable, 4 Gauge, Clear 25 Ft Roll, For Custom Use Replacement For #10432,79-2001

• Kit allows you to custom build battery cables to the exact length necessary
• The clear coated ultra-flexible 4 gauge cable features 1,661 individual tin coated copper strands for maximum current flow
• The finished cables not only look great on custom built motorcycles, we highly recommend them for high compression engines
• or best results we suggest you use our 10608 terminal crimping tool and our 10607 heat shrink gun

All Balls
4 Gauge Cable, 25 oot Roll, Replacement Pieces for 10432, (Imported)

Cable Bty Ultra-Flexible Clear 15" Ctr/Ctr 1/4" & 5/16" Holes 4 Gauge Tinned Copper ..78-115

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  15 Individual Cable

Cable Bty Ultra-Flexible Clear 9" Ctr/Ctr 1/4" & 5/16" Holes 4 Gauge Tinned Copper ..78-109

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  9 Individual Cable

Cable Bty Ultra-Flexible Clear Fxr 89/94 1-12" 1-16" Cables 4 Gauge Tinned Copper..79-3004

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  Cable Kit
  Includes 12 and 16 Cables
  Fits FXR 1989/1994

Bty Cable Builders Kit,Cus Use W/25Ft Clear Cable,Heat Shrink 4 Gauge Tinned Copper..79-3303

• Kit allows you to custom build battery cables to the exact length necessary
• The clear coated ultra-flexible 4 gauge cable features 1,661 individual tin coated copper strands for maximum current flow
• The finished cables not only look great on custom built motorcycles, we highly recommend them for high compression engines
• or best results we suggest you use our 10608 terminal crimping tool and our 10607 heat shrink gun

All Balls Complete Kit
Includes:

25 feet of cable

20 terminals ¹/₄

12 terminals ⁵/₁₆

8 terminals ³/₈

40 black heat shrinks

12 red heat shrinks

Cable Bty Ultra-Flexible Clear 16" Ctr/Ctr 1/4" & 5/16" Holes 4 Gauge Tinned Copper ..78-116

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  16 Individual Cable

Cable Bty Ultra-Flexible Clear 14" Ctr/Ctr 1/4" & 5/16" Holes 4 Gauge Tinned Copper ..78-114

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  14 Individual Cable

Jumper Cables,Motorcycle All Motorcycles Compact Enough To Carry With You.... 84-96306

• Made from 10 gauge multi-strand copper wire
• Toothed clamps provide a secure connection
• Highly flexible cables and compact design make these easy enough to carry on the motorcycle
• Economically priced
• Includes Instructions

V-FACTOR
6 oot Jumper Cables
(Imported)