Mid-USA

Taillight/Lic Fender Mt LED Fits All 4X7 License Plates Cp Billet Alum Fits Fdr Profile

• Hidden allen head lock screws secure the license plate from the back furnishing you with a smooth, boltless look
• Included is a rubber mounting block and hardware for a no hassle installation
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License slides in from bottom
Fits flat or curved rear fender

Taillight/Lic Mt Side Axle Lh St 86/99,Uw 3/4" Or 1"Od Axle Horizontal Mt,Led Lights,Cp

• Includes a special adapter that will allow for a ³/₄ O.D. axle or a 1 O.D. axle
• The axle spacer/adjuster stop is incorporated into the license plate backing plate mount for a clean look
• Hidden allen head lock screws secure the license plate from the backside furnishing you with a smooth, boltless look
• Mounts on left side (replaces axle spacer adjuster stop)
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: Taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License plate slides in from bottom
Fits Softail 1986/1999
(Imported)

Tombstone Taillight Asy LED Big Twin 1947/1954 Chrome Rpls Hd# 68003-47T
These Tombstone Taillight Kits include a mount kit that will simplify installation on the L style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157 or our 11801 dual contact incandescent bulb. The LED type uses 45 separate red LEDs for the brake/taillight function and 3 blue LEDs to illuminate the license plate. The taillight assembly is die cast for strength and the fender adapter mount is stamped steel. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models.

Note: These taillights are not DOT apporved and should be used accordingly.V-FACTOR
Chrome Plated LED type Tombstone Taillight Assembly only
Fits L style rear fenders 1973/1998, Big Twin 1947/1954 & custom applications
Replaces HD# 68003-47T
(Imported)

Cateye Taillight Asy 12V LED Flat Back For Universal Mount Die Cast Chrome Plated

• Available in your choice of the original bulb type or the updated LED (light emitting diode) type
• The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 LEDs for the brake/taillight and 3 LEDs for the license light
• LED lights are not affected by vibration or moisture and have an incredible life span
• The LED lights do not produce any heat and draw only 11.25 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These assemblies include a die cast housing, plastic lens, frosted license plate illumination lens and lead wires
• The flat back housing includes mounting studs on 2 centers

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated LED type Taillight
(Imported)

Taillight W/Turn Signals Custom App All Models,12V,Mtg Holes 2.5"Ctr...Cp Billet Alum

• CNC machined from billet aluminum
• This 12 volt taillight is the perfect complement for a at Bob style rear fender
• eatures built-in turn signals and includes a separate window that illuminates the license plate
• The taillight has a flat back and mounts on 2 1/2 centers
• 7 of taillight lead wire is included and the turn signals include 7 of wire
• Assembly measures 6 5/8 long x 3 tall x 1 13/16 thick

Note: This taillight assembly is not DOT approved and should be used accordingly. Due to the low amperage draw of the turn signals, to retain the blinker function we recommend using 15138 self-cancelling turn signal module with load equalizer or our 15137 turn signal load equalizer for models without self-cancelling systems.V-FACTOR
Chrome Plated Complete Taillightwith Turn Signals

Taillight,Custom Small Cateye 12V Bulb Type Flat Back 2" Mtg Centers Abs Plastic Housing Cp

• License plate mount is constructed from lightweight aluminum
• Taillight is manufactured from ABS plastic
• Taillight mounts on 2 centers, measures 6 1/2 long x 1 3/4 wide x 1 3/4 tall
• License mount fits flat or curved fenders
• License mount includes mounting gasket
• 19 LEDs used in taillight, 4 LEDs used for license plate light
• 12 volt applications
• Includes mounting hardware

Note: These taillight assemblies are not DOT approved and should be used accordinglyV-FACTOR
Chrome Plated Bulb type Tailight only

Taillight/Lic Mt Small Cateye 12V Bulb Type Uw/Cus Fdr,Abs Lt Housing Cp,Alum Lic Mt Pol

• License plate mount is constructed from lightweight aluminum
• Taillight is manufactured from ABS plastic
• Taillight mounts on 2 centers, measures 6 1/2 long x 1 3/4 wide x 1 3/4 tall
• License mount fits flat or curved fenders
• License mount includes mounting gasket
• 19 LEDs used in taillight, 4 LEDs used for license plate light
• 12 volt applications
• Includes mounting hardware

Note: These taillight assemblies are not DOT approved and should be used accordinglyV-FACTOR
Chrome Plated Bulb type Taillight & Aluminum License Mount Kit

Taillight,Custom Box Style For All Models 12 Volt Die Cast Chrome Plated

• Die cast housing with a flat back for easy mounting
• Drilled and tapped for use with ⁵/₁₆-18 mounting bolts on 2 centers
• Taillight measures 2 tall x 4 ¹/₄ wide and is 2 thick
• A clear license window is also provided
• Includes a 12 volt bulb with approximately 8 of lead wire

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight Assembly
(Imported)

Tombstone Taillight Asy Oem Big Twin 1947/1954 & Custom W/ 12V Bulb,Bracket & Gasket Cp
Available in your choice of the bulb type or the LED (light emitting diode) type. The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb. The LED type uses 45 red LEDs for the brake/taillight and three blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredible life span. The LEDs do not produce any power robbing heat and draw only 4.5 watts of power as opposed to the 29.4 watts of power that the incandescent bulb draws. These 12 volt taillights feature a die cast housing and include a rubber fender gasket. License mount and hardware is also included.

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Bulb type Tombstone Taillight Assemby only
Fits L style rear fenders 1973/1998, Big Twin 1947/1954 & custom applications
Replaces HD# 68003-47T
(Imported)

Taillight,Beehive Stk Style Big Twin 1939/1946 W/12 V Bulb Chromed..Replaces Hd 68002-39T

• Many universal mounting applications
• Includes 12 volt bulb, rubber gasket for mounting and license bracket

Note: This taillight is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight
Fits 1939/1946 models & custom applications
Replaces HD# 68002-39T
(Imported)

Headlight Asy,Custom 4-1/2" W/Visor, 6-1/2" Long 12V 60/55W Hlgn,Cp Billet Alum

• Show chrome plated billet aluminum
• See below for availability of headlight lens
• Halogen bulb

V-FACTOR
Chrome Plated 4 1/2 Headlight with Plain Style lens
(Imported)

Headlight,Ribbed Style 5-3/4" Custom W/Bezel Visor 12V Halo- Gen Bottom Mt Cp

• Achieve that locomotive look with this stamped steel Headlight Assembly with bezel visor
• Horizontal ribs give it that in motion look
• Great for that clean custom use where a shell mounted high beam indicator is not desired
• Includes bottom mount
• Use two of our matching spotlights 11031 to enhance your lighting needs
• Includes a 12 volt 60/55 watt DOT approved replaceable halogen bulb

V-FACTOR
Chrome Plated Complete Headlight Assembly

Spotlight, 4-1/2" LED Black Housing, Custom Use, Bottom Mount

• 4 1/2 bottom mount
• LED light
• See below for availability of finishes
• DOT approved
• See matching headlights found in the electric section

V-FACTOR
Black Spotlight with Black ascia

Spotlight & Passing Light Asy 4-1/2" Dia,Satin Black,35/35W 1" Mounting Stud

• Satin black housing with chrome trim ring
• Bottom mount stud measures 1 long
• 35/55W
• Blue high beam indicator

V-FACTOR
Black Satin 4 1/2 Spotlight Assembly

Spotlight & Passing Light Asy 4-1/2"Dia W/H-3 Halogen Bulb Sae Approved Chrome Plated
These 12 volt 4 ¹/₂ O.D. Spotlight and Passing Light Assemblies are complete as shown and ready to bolt on. See below for availability of lens. V-FACTOR
Chrome Plated Complete Halogen Assembly
Includes replaceable 55 watt halogen bulb & semi-fluted lens (SAE approved halogen lens projects oval shaped illumination)

Fits Dresser models 1962/Later & custom use

Replaces HD# 68667-78

(Imported)

Replacement Headlight,Cp V-Rod 02/L* & Custom Ap Rpls Hd 68880-01

• Complete headlight assembly manufactured from aluminum
• Black housing is manufactured from high-impact black plastic
• Includes an H11 low beam & H9 high beam bulbs
• Also available is a black or chrome headlight bracket to complete the job
• Mix the finishes for a unique custom look

V-FACTOR
Headlight Assembly with Chrome Finish
Fits V-Rod 2002/Later & custom applications
Replaces HD# 68880-01

Replacement Headlight,Black V-Rod 02/L* & Custom App Rpls Hd 68880-01

• Complete headlight assembly manufactured from aluminum
• Black housing is manufactured from high-impact black plastic
• Includes an H11 low beam & H9 high beam bulbs
• Also available is a black or chrome headlight bracket to complete the job
• Mix the finishes for a unique custom look

V-FACTOR
Headlight Assembly with Black Finish
Fits V-Rod 2002/Later & custom applications
Replaces HD# 68880-01

Headlight,5-3/4" Custom Hi-Low Halogen Sealed Beam 60/55 Watts Bottom Mount Cp

• Stamped steel construction
• Includes high beam indicator light and mounting hardware
• 12 volt high intensity sealed beam headlights
• Bottom mounting

V-FACTOR
Chrome Plated Halogen Headlight Assembly (50/35 watt DOT Approved)

4-1/2" Headlight Shell,Chrome Custom Use Includes Socket For Bulb

• Pefect economy headlight shell for bobbers and customs
• Includes everything except headlight bulb and hi-beam indicator bulb
• Bottom mount style
• Sold each

V-FACTOR
Chrome Plated Headlight Shell