All

BARNETT Electronic Throttle Control Extension, Harley 08-13 FL

• Allow easy changes in handlebar height on models with electronic throttle control
• Made with OEM-type connectors
• Extensions can be snapped together to create longer lengths
• Sold each
• Made in the U.S.A.

BARNETT Electronic Throttle Control Extension, length 12", Harley 08-13 FL

• Allow easy changes in handlebar height on models with electronic throttle control
• Made with OEM-type connectors
• Extensions can be snapped together to create longer lengths
• Sold each
• Made in the U.S.A.

BARNETT Electronic Throttle Control Extension, length 8", Harley 08-13 FL

• Allow easy changes in handlebar height on models with electronic throttle control
• Made with OEM-type connectors
• Extensions can be snapped together to create longer lengths
• Sold each
• Made in the U.S.A.

Fly-By-Wire Extension Harness Kit, Fits All Bagger 2008/L* 12" Extension Ntbw-X12

• Makes adding taller handlebars a snap
• These extensions have been tested & designed by Namz to work perfectly without causing any harm or interference to the motorcycle's computer

NAMZ Custom Cycle Products
12 Extension Kit

Fly-By-Wire Extension Harness Kit, Fits All Bagger 2008/L* 15" Extension Ntbw-X15

• Makes adding taller handlebars a snap
• These extensions have been tested & designed by Namz to work perfectly without causing any harm or interference to the motorcycle's computer

NAMZ Custom Cycle Products
15 Extension Kit

Fly-By-Wire Extension Harness Kit, Fits All Bagger 2008/L* 4" Extension Ntbw-X04

• Makes adding taller handlebars a snap
• These extensions have been tested & designed by Namz to work perfectly without causing any harm or interference to the motorcycle's computer

NAMZ Custom Cycle Products
4 Extension Kit

Fly-By-Wire Extension Harness Kit, Fits All Bagger 2008/L* 8" Extension Ntbw-X08

• Makes adding taller handlebars a snap
• These extensions have been tested & designed by Namz to work perfectly without causing any harm or interference to the motorcycle's computer

NAMZ Custom Cycle Products
8 Extension Kit

Fly-By-Wire Extension Harness Kit, Fits All Bagger 2008/L* Plug-N-Play Up To 18" Ext.

• Plug-n-Play wiring warness is a no brainer when adding taller bars
• Installs in minutes
• One size fits all (up to 18)

NAMZ Custom Cycle Products
Replaces OEM Harness

Handlebar Extended Wiring Kit Bt,Spt 1982/1995,48" Total Lg Inc Vinyl Housing & Connectors

• These harness kits can be used to replace OE color coded handlebar harness and are 12 inches longer than OE
• Also can be used to extend original wiring harnesses to accommodate higher risers and handlebars
• Kit includes color coded wires, flexible black vinyl housing and crimp connectors

V-FACTOR
Fits Big Twin & Sportster 1982/1995 (48 total length)
(Imported)

LA CHOPPERS Handlebar Extension Wiring Kit, Black, Harley 07-13 FL

• Saves time by streamlining handlebar wiring jobs
• Kits include all the materials necessary to extend the wires for hand controls (do not include extensions for Throttle By Wire controls if applicable)
• Terminals crimped on one end
• Cut-to-length design will accommodate up to 20" Ape Hanger handlebars
• Includes OEM color matching wires and heat shrink
• Made in the U.S.A.

LA CHOPPERS Handlebar Extension Wiring Kit, Harley 14-15 FL

• Saves time by streamlining handlebar wiring jobs
• Kits include all the materials necessary to extend the wires for hand controls (do not include extensions for Throttle By Wire controls if applicable)
• Terminals crimped on one end
• Cut-to-length design will accommodate up to 20" Ape Hanger handlebars
• Includes OEM color matching wires and heat shrink
• Made in the U.S.A.

LA CHOPPERS Throttle By Wire Extension Kit, Throttle-By-Wire, Harley 14-15 FL

• Wiring extension kit for electronic throttle control
• Feature OEM-match color-coded wires with factory connectors
• Work for most handlebar heights (up to 20" Ape Hangers)
• Made in the U.S.A.

LA CHOPPERS Throttle-By-Wire Extension Kit, specific application, Harley 08-13 FL

• Wiring extension kit for electronic throttle control
• Feature OEM-match color-coded wires with factory connectors
• Work for most handlebar heights (up to 20" Ape Hangers)
• Made in the U.S.A.

NAMZ Ready-To-Install Handlebar Extension Harness, length +4", wire count 26, Harley 07-13 FL

• All the items needed to successfully extend the wiring to a set of OEM H-D handlebar switches
• Harnesses include both male and female Molex terminals crimped on each end
• Kits for all except FLHT and FLT models include wire heat shrink, a length of 3/8" heat shrink and color-matching wire
• Kits for FLHT and FLT models include wire heat shrink, a length of 1/2" heat shrink and color-matching wire
• Made in the U.S.A.

NAMZ Throttle By Wire Extension Harness Kit, Harley 14-15 FL

• Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars
• Color coded to connect to the existing Molex connector; simply plug and play (except models with hardwired harnesses)
• Made in the U.S.A.

NAMZ Throttle-By-Wire Extension Harness Kit, Harley 08-13 FL

• Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars
• Color coded to connect to the existing Molex connector; simply plug and play (except models with hardwired harnesses)
• Made in the U.S.A.

NAMZ Throttle-By-Wire Extension Harness Kit, length +4", Harley 08-16 FL

• Designed and tested to extend your wiring without causing any harm or interference to the motorcycle's computer when installing taller handlebars
• Color coded to connect to the existing Molex connector; simply plug and play (except models with hardwired harnesses)
• Made in the U.S.A.

NAMZ Universal Handlebar Switch Wire Extensions, Harley 07-13 FL

• Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars
• Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be re-installed into the factory connector
• All kits come 100% complete with OEM color matching wire and all of the heat-shrink tubing needed to do the job right
• 24" universal handlebar switch wire extensions; fits up to 20" Apes
• Made in the U.S.A.

NAMZ Universal Handlebar Switch Wire Extensions, Harley 96-06 FL

• Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars
• Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be re-installed into the factory connector
• All kits come 100% complete with OEM color matching wire and all of the heat-shrink tubing needed to do the job right
• 24" universal handlebar switch wire extensions; fits up to 20" Apes
• Made in the U.S.A.

V-Twin Manufacturing 48" Handlebar Switch Wire Set, 1996-up BT - Set

Handlebar wiring harness kit comes with both left and right wire kits and are color coded. Wiring harness measures 48" in length.

FXST 1996-2006
FLST 1996-2006
FLT 1996-2006
FXD 1996-2006
XL 1996-2006

V-Twin Manufacturing 82-90 Stock Handlebar Wiring Harness 37" - Sold Each

Handlebar wiring harness kit is color coded, stock type measures 37" long.

FL 1982-1984
FX 1982-1984
FXST 1984-1990
FLST 1986-1990
FXR 1982-1990
XL 1982-1990

Measurements:

Length: 37"

V-Twin Manufacturing Extended Handlebar Wiring Harness 47", 1982-1990 BT - Kit

Handlebar wiring harness kit is color coded, extended type measures 47" long.

FL 1982-1984
FX 1982-1984
FXST 1984-1990
FLST 1986-1990
FXR 1982-1990
XL 1982-1990

Measurements:

Length: 47"

V-Twin Manufacturing Extended Handlebar Wiring Harness, 1973-81 - Sold Each

Handlebar wiring harness kit is extended type and color coded.

FX 1973-1981
FL 1973-1981
XL 1973-1981

V-Twin Manufacturing Handlebar Harness-Switch Assembly, 1973-81 BT - Kit

Handlebar wiring harness and switch assembly includes wire connectors, buttons, screws, stop light switch rubber boot, and switch retaining plates. Wiring is 40" long and is color coded to match stock wires.
Includes wire connectors, buttons, screws

V-Twin Manufacturing Handlebar Harness-Switch Assembly, 1973-81 BT - Sold Each

Handlebar wiring harness and switch assembly includes wire connectors, buttons, screws, stop light switch rubber boot, and switch retaining plates. Wiring is 40" long and is color coded to match stock wires.
Kit includes wire connectors, button, scr

V-Twin Manufacturing Handlebar Wiring Harness 12" Extension Kit, 1996-2006, FLT - Kit
Handlebar wiring harness extension kit has a 12" extension and includes 12 right and 12 left OEM color matching wires. Fits: FLT 1996-2006 UOM: 1 - KIT Country of Origin: Imported

V-Twin Manufacturing Handlebar Wiring Harness 15" Extension Kit, 1996-2006, FLT - Kit
Handlebar wiring harness extension kit has a 15" extension and includes 12 right and 12 left OEM color matching wires. Fits: FLT 1996-2006 UOM: 1 - KIT Country of Origin: Imported

V-Twin Manufacturing Handlebar Wiring Harness 4" Extension Kit, 2007-Up - Kit
Handlebar wiring harness extension kit has a 4" extension and includes 6 right and 8 left OEM color matching wires. Fits: FXST 2007-UP FLST 2007-UP FXD 2007-UP XL 2007-UP UOM: 1 - KIT Country of Origin: Impor

V-Twin Manufacturing Handlebar Wiring Harness 4" Extension Kit, 2007-Up - Kit
Handlebar wiring harness extension kit has a 4" extension with 17 wires. Does not include wires for Radio, CB or Throttle Control. Fits: Harley Davidson models FLHT 2007-UP FLHR 2007-UP FLHX 2007-UP FLTR 2007-UP

V-Twin Manufacturing Throttle by Wire +12 Extension Harness Kit fits FLT 2008-UP - Kit
Throttle by Wire +12 Extension Harness Kit Throttle by wire +12" extension harness kit is for the right side only and has 6 wires total, without cruise. This harness fits the Molex Connector. Order switch housing kit separately left and ri