All

106 products

106 products

Alignment Tool With 1/4-20 Thd Fits Various Eng Applications See Catalog Fof Uses
Mid-USA
$7.40
Eng Base Gasket By-Pass Insert BT Spt Evo All Years* 2 Pigtail Insert & Instr
Mid-USA
$51.68
Engine Tool,Cyl Head Holder 12 & 14Mm S.Plug Mt In Bench Vice Any Pos. Pingel .62082
Mid-USA
$64.65
Sold Out
Engine Tool,Lock Ring Tool Sh 83/L BT Evo 84/L Spt L85/L* Install Only Rpls Hd 34623A
Mid-USA
$204.00
Sold Out
Engine Tool,Oil Screen Plug BT L52/99(Ex Tc88) Tappet Plug W/Slot Clears Exh Pipe Mfg2233
Mid-USA
$48.40
Engine Tool,Piston Pin Bushing All Models Except Twin Cam 88" Replaces Hd 95970-32A....Jims
Mid-USA
$198.05
Engine Tool,Timing Mark Viewer 5/8-18 Thread Use To Time M/C W/O Oily Mess Rpl 96295-65Ta
Mid-USA
$6.80
Engine Tool,Timken Brg Race Spreads All 2 Piece Race Tools For Proper Grip Jims .2388
Mid-USA
$69.00
Engine Tool,Universal Driver Use W/60724-60819-35100-57905 60793-60749-61750-60747-60748
Mid-USA
$125.00
Engine Tool,Valve Guide Driver All Models W/5/16,11/32 & 3/8" Id Valve Guides.....Jims.1001
Mid-USA
$70.25
Sold Out
Exhaust Stud Drill Plate Tool BT Evo Tc88 Spt Evo All Yrs* Guides & Aligns Drill Bit.1705
Mid-USA
$183.85
FEULING OIL PUMP CORP. Pushrod Tube Holder Tool, Black, made in the usa, Each
Feuling Oil Pump Corp.
$16.95
Sold Out
JIMS Piston Ring End Gap Tool Standard Pistons 3.875" Or 4" Bore, For H-D 95"/103"/110" Motors.
Jims
$94.95
LANG TOOLS 12mm Spark Plug Rethreader, Black, made in the usa, Each
Lang Tools
$21.95
Sold Out
LANG TOOLS Cylinder Sleeve Hold-Down, Silver, Zinc-plated, made in the usa, 4-Pack, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL
Lang Tools
$48.95
LANG TOOLS Lower Rocker Box Wrench, Harley 94-00 FX 94-99 FL 94 - 94 XL
Lang Tools
$32.95
LANG TOOLS Lower Rocker Box Wrench, Harley 99-12 FX 99-12 FL
Lang Tools
$32.95
LANG TOOLS Replacement Bits For Rocker Box Cover Ratcheting Wrench, 3-Pack, size 3/16"
Lang Tools
$16.95
LANG TOOLS Rocker Box Cover Bolt Ratcheting Wrench, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL
Lang Tools
$68.95
Sold Out
MOTION PRO Tappet Screen Plug Tool, Black, Each
Motion Pro
$9.50
Sold Out
Piston Pin Bushing Reamer Tool Big Twin Models(Ex Tc) & Spt All Years
Mid-USA
$349.95
Piston Wrist Pin Remover All Models, All Years Simplifys Removal Jims.1276
Mid-USA
$201.35
Pushrod Keeper Tool Cad All Ohv Mdls,Ex Spt 91/L Easy Removal/Install 08-0255
Mid-USA
$48.15
Rocker Arm Cover Wrench Cad BT Evo Tc88,Spt Evo All Years 3/16"Allen,Vinyl Grip 08-0220
Mid-USA
$18.20
Rocker Shaft Bushing BT 66/L* XL 57/L* Rpls.Hd#17428-57
Mid-USA
$2.20
Tappet Block Alignment Tool Sh BT Evo Late 77/L Use Two For Perfect Job..Jims 33443-84
Mid-USA
$36.65
Torque Plates Twin Cam 88 & 96 3.75"-3.875" Jims 951
Mid-USA
$762.20
Torque Plates Twin Cam Big Bore 4"-4.060" Jims 930
Mid-USA
$742.25
V-Twin Manufacturing .310 Valve Guide Ream
V-Twin Manufacturing
$179.86
V-Twin Manufacturing .311 Valve Guide Ream
V-Twin Manufacturing
$179.86
V-Twin Manufacturing .376 Valve Guide Ream
V-Twin Manufacturing
$146.91
V-Twin Manufacturing .377 Valve Guide Ream
V-Twin Manufacturing
$146.91
V-Twin Manufacturing .378 Valve Guide Ream
V-Twin Manufacturing
$179.86
V-Twin Manufacturing .379 Valve Guide Ream
V-Twin Manufacturing
$145.57
V-Twin Manufacturing 1-4 x24 Tappet Black Align Screw
V-Twin Manufacturing
$11.86
Alignment Tool With 1/4-20 Thd Fits Various Eng Applications See Catalog Fof Uses Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Alignment Tool With 1/4-20 Thd Fits Various Eng Applications See Catalog Fof Uses

MID-60717

$7.40

In Stock

Save $-7.40
/
Shipping calculated at checkout.
Alignment Tool With 1/4-20 Thd Fits Various Eng Applications See Catalog Fof Uses
  • Tapered shank is designed to provide perfect alignment with the threads
  • Use two to insure proper alignment
V-FACTOR
Aligns Big Twin Late 1976/1999 tappet block, all Evolution & Twin Cam lower rocker covers, cam support plate for Twin Cam models
Sold Each, Replaces HD# 33443
(Imported)
Eng Base Gasket By-Pass Insert BT Spt Evo All Years* 2 Pigtail Insert & Instr Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Eng Base Gasket By-Pass Insert BT Spt Evo All Years* 2 Pigtail Insert & Instr

MID-60146

$51.68

In Stock

Save $-51.68
/
Shipping calculated at checkout.
Eng Base Gasket By-Pass Insert Bt Spt Evo All Years* 2 Pigtail Insert & Instr
  • If you have an Evolution with about 20,000 miles on it, you have a base gasket leak! The factory has tried to remedy this problem with at least four different styles of cylinder studs to no avail
  • Eliminates top end drain back oil from even touching the base gasket
  • or best results use with metal base gaskets
  • Tap the cylinder in the top end oil drain back hole with the supplied aluminum tap and install the PigTail® with about one inch left protruding to be inserted into the crankcase
  • Can be easily removed for cylinder service
  • Designed for OE style cylinders (not intented for big bore cylinders)
  • Includes instructions
HARDWARE
Replacement pack of 2 PigTail® Inserts only
Engine Tool,Cyl Head Holder 12 & 14Mm S.Plug Mt In Bench Vice Any Pos. Pingel .62082 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Cyl Head Holder 12 & 14Mm S.Plug Mt In Bench Vice Any Pos. Pingel .62082

MID-60798

$64.65

In Stock

Save $-64.65
/
Shipping calculated at checkout.
Engine Tool,Cyl Head Holder 12 & 14Mm S.Plug Mt In Bench Vice Any Pos. Pingel .62082
  • Mounts in any bench vise in any position and holds the cylinder head securely in place for all types of head work
  • 10 long tool offers 12mm threads on one end and 14mm threads on the other end
  • The hex portion of the shaft of the tool is also drilled for clean and easy wall storage
Pingel
Steel and Zinc Plated
Engine Tool,Piston Pin Bushing All Models Except Twin Cam 88" Replaces Hd 95970-32A....Jims Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Piston Pin Bushing All Models Except Twin Cam 88" Replaces Hd 95970-32A....Jims

MID-60729

$198.05

In Stock

Save $-198.05
/
Shipping calculated at checkout.
Engine Tool,Piston Pin Bushing All Models Except Twin Cam 88" Replaces Hd 95970-32A....Jims
Used to remove and install wrist pin bushings without removing rods from crankcase on all Harley-Davidson® models (except Twin Cam). Includes a thrust bearing for smooth tool operation.Jims
or all Harley-Davidson® models (except Twin Cam)
Replaces HD# 95970-32A
Engine Tool,Timing Mark Viewer 5/8-18 Thread Use To Time M/C W/O Oily Mess Rpl 96295-65Ta Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Timing Mark Viewer 5/8-18 Thread Use To Time M/C W/O Oily Mess Rpl 96295-65Ta

MID-65352

$6.80

In Stock

Save $-6.80
/
Shipping calculated at checkout.
Engine Tool,Timing Mark Viewer 5/8-18 Thread Use To Time M/C W/O Oily Mess Rpl 96295-65Ta
  • This handy little 5/8-18 thread tool is a must for anyone wanting to view the flywheel timing mark with a timing light without getting an eye full of oil and oil all over the bike
  • Simply screw plug in by hand until it touches the flywheel, then back out 1/4turn . Now you're ready to time your bike without all the oily mess
Note: Not to be used as a timing hole plug.HARDWARE
Fits all models with 5/8-18 thread
Replaces HD# 95395-65TA
Engine Tool,Timken Brg Race Spreads All 2 Piece Race Tools For Proper Grip Jims .2388 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Timken Brg Race Spreads All 2 Piece Race Tools For Proper Grip Jims .2388

MID-60819

$69.00

In Stock

Save $-69.00
/
Shipping calculated at checkout.
Engine Tool,Timken Brg Race Spreads All 2 Piece Race Tools For Proper Grip Jims .2388
  • Removes Timken bearing races with ease
  • Used with Handle 60751 and any of our two piece race removal tools
  • irmly spreads the race tools by applying outward force
Jims
Can be used with bearing race tools 35100, 60747 & 57905 which are available separately
Engine Tool,Universal Driver Use W/60724-60819-35100-57905 60793-60749-61750-60747-60748 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Universal Driver Use W/60724-60819-35100-57905 60793-60749-61750-60747-60748

MID-60751

$125.00

In Stock

Save $-125.00
/
Shipping calculated at checkout.
Engine Tool,Universal Driver Use W/60724-60819-35100-57905 60793-60749-61750-60747-60748
  • Used with many of Jim's tools
  • Sold separately to decrease your tool costs
  • The 1/2 O.D. pilot includes an O ring to hold the installed tool in place
Jims
eatures a knurled 1 O.D. grip & is a total of 12 long
Engine Tool,Valve Guide Driver All Models W/5/16,11/32 & 3/8" Id Valve Guides.....Jims.1001 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Engine Tool,Valve Guide Driver All Models W/5/16,11/32 & 3/8" Id Valve Guides.....Jims.1001

MID-60738

$70.25

In Stock

Save $-70.25
/
Shipping calculated at checkout.
Engine Tool,Valve Guide Driver All Models W/5/16,11/32 & 3/8" Id Valve Guides.....Jims.1001
Jims
Three piece set fits 5/16, 11/32 and 3/8 I.D. value guides
or use on Big Twin, Sportster and 45ci, with shouldered type valve guides
FEULING OIL PUMP CORP. Pushrod Tube Holder Tool, Black, made in the usa, Each Garage and Shop Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. Pushrod Tube Holder Tool, Black, made in the usa, Each

DS-38010159

$16.95

In Stock

Save $-16.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. Pushrod Tube Holder Tool, Black, made in the usa, Each
  • Makes for easy adjustment of adjustable pushrods, holding pushrod tubes up and out of the way
  • Sold each
  • Made in the U.S.A.
LANG TOOLS 12mm Spark Plug Rethreader, Black, made in the usa, Each Garage and Shop Lang Tools - K and G Cycles
Lang Tools

LANG TOOLS 12mm Spark Plug Rethreader, Black, made in the usa, Each

DS-38070119

$21.95

In Stock

Save $-21.95
/
Shipping calculated at checkout.
LANG TOOLS 12mm Spark Plug Rethreader, Black, made in the usa, Each
  • Used to clean up dirty or damaged spark plug threads on Twin Cam, V-Rod and some Sportster models
  • Consists of a special 12mm spark plug thread with a lead in (for proper alignment) and flutes (for dirt and chip relief)
  • Also features a 5/8" hexagon with O-ring and female 3/8" square drive; requires the use of a 5/8" spark plug socket, or the female square requires the use of a male 3/8" square drive
  • Special 12mm spark plug thread ensures proper engagement
LANG TOOLS Lower Rocker Box Wrench, Harley 94-00 FX 94-99 FL 94 - 94 XL Garage and Shop Lang Tools - K and G Cycles
Lang Tools

LANG TOOLS Lower Rocker Box Wrench, Harley 94-00 FX 94-99 FL 94 - 94 XL

DS-38010204

$32.95

In Stock

Save $-32.95
/
Shipping calculated at checkout.
LANG TOOLS Lower Rocker Box Wrench, Harley 94-00 FX 94-99 FL 94 - 94 XL
  • Extra-long reversible ratcheting wrench is used to install/remove the lower rocker box
  • A special 7/16" socket protrudes out of the wrench to reach the application
  • Vinyl grip provides a comfortable, ergonomic grip and prevents the wrench from scratching or marring the bike
LANG TOOLS Lower Rocker Box Wrench, Harley 99-12 FX 99-12 FL Garage and Shop Lang Tools - K and G Cycles
Lang Tools

LANG TOOLS Lower Rocker Box Wrench, Harley 99-12 FX 99-12 FL

DS-38010203

$32.95

In Stock

Save $-32.95
/
Shipping calculated at checkout.
LANG TOOLS Lower Rocker Box Wrench, Harley 99-12 FX 99-12 FL
  • Extra-long reversible ratcheting wrench is used to install/remove the lower rocker box
  • A special 7/16" socket protrudes out of the wrench to reach the application
  • Vinyl grip provides a comfortable, ergonomic grip and prevents the wrench from scratching or marring the bike
LANG TOOLS Replacement Bits For Rocker Box Cover Ratcheting Wrench, 3-Pack, size 3/16" Garage and Shop Lang Tools - K and G Cycles
Lang Tools

LANG TOOLS Replacement Bits For Rocker Box Cover Ratcheting Wrench, 3-Pack, size 3/16"

DS-38010202

$16.95

In Stock

Save $-16.95
/
Shipping calculated at checkout.
LANG TOOLS Replacement Bits For Rocker Box Cover Ratcheting Wrench, 3-Pack, size 3/16"
  • To install and remove rocker box covers
  • 93/4" long chrome-plated single-end reversible wrench has a 1/4" drive and 3/16" replaceable Allen bit end
  • Low profile to allow clearance between frame and engine
  • Comfortable, ergonomic vinyl grip
  • Vinyl will not scratch chrome or paint
  • Replacement bits also available
  • Made in the U.S.A.
LANG TOOLS Rocker Box Cover Bolt Ratcheting Wrench, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL Garage and Shop Lang Tools - K and G Cycles
Lang Tools

LANG TOOLS Rocker Box Cover Bolt Ratcheting Wrench, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL

DS-38010198

$68.95

In Stock

Save $-68.95
/
Shipping calculated at checkout.
LANG TOOLS Rocker Box Cover Bolt Ratcheting Wrench, Each, specific application, Harley 84-15 FX 84-15 FL 86 - 15 XL
  • To install and remove rocker box covers
  • 93/4" long chrome-plated single-end reversible wrench has a 1/4" drive and 3/16" replaceable Allen bit end
  • Low profile to allow clearance between frame and engine
  • Comfortable, ergonomic vinyl grip
  • Vinyl will not scratch chrome or paint
  • Replacement bits also available
  • Made in the U.S.A.
Piston Wrist Pin Remover All Models, All Years Simplifys Removal Jims.1276 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Piston Wrist Pin Remover All Models, All Years Simplifys Removal Jims.1276

MID-60833

$201.35

In Stock

Save $-201.35
/
Shipping calculated at checkout.
Piston Wrist Pin Remover All Models, All Years Simplifys Removal Jims.1276
With this tool one person can easily remove the connecting rods wrist pin from the piston with no fear of damage to the wrist pin bushing, connecting rod or the piston.Jims
Fits all models, all years
Replaces HD# 42320
Pushrod Keeper Tool Cad All Ohv Mdls,Ex Spt 91/L Easy Removal/Install 08-0255 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Pushrod Keeper Tool Cad All Ohv Mdls,Ex Spt 91/L Easy Removal/Install 08-0255

MID-60715

$48.15

In Stock

Save $-48.15
/
Shipping calculated at checkout.
Pushrod Keeper Tool Cad All Ohv Mdls,Ex Spt 91/L Easy Removal/Install 08-0255
  • Designed to compress the spring cover with one hand when removing or installing the retainer clip
  • This is the most professional tool available for the type of service it performs
  • 13 long for good leverage and made from steel for strength
  • Rubber coated handles for comfort
Motion Pro
Fits all OHV models (except Sportster 1991/Later)
(Imported)
Rocker Arm Cover Wrench Cad BT Evo Tc88,Spt Evo All Years 3/16"Allen,Vinyl Grip 08-0220 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Rocker Arm Cover Wrench Cad BT Evo Tc88,Spt Evo All Years 3/16"Allen,Vinyl Grip 08-0220

MID-60714

$18.20

In Stock

Save $-18.20
/
Shipping calculated at checkout.
Rocker Arm Cover Wrench Cad Bt Evo Tc88,Spt Evo All Years 3/16"Allen,Vinyl Grip 08-0220
  • Designed to improve access to the rear rocker cover allen bolts directly below the frame
  • The stubby 3/16 allen wrench is TIG welded to an 8 long handle for leverage
  • A 3/8 drive hole is provided for use with a torque wrench
  • Comfortable rubber coated handle
Motion Pro
Cadmium Plated
Fits all Evolution models & Twin Cam
(Imported)
Rocker Shaft Bushing BT 66/L* XL 57/L* Rpls.Hd#17428-57 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Rocker Shaft Bushing BT 66/L* XL 57/L* Rpls.Hd#17428-57

MID-60903

$2.20

In Stock

Save $-2.20
/
Shipping calculated at checkout.
Rocker Shaft Bushing Bt 66/L* XL 57/L* Rpls.Hd#17428-57
V-FACTOR
Rocker Arm Bushing
Fits Shovelhead 1966/1984, Big Twin Evolution 1984/1999, Twin Cam all years, Evolution Sportster all years
Replaces HD# 17428-57
(Imported)
Tappet Block Alignment Tool Sh BT Evo Late 77/L Use Two For Perfect Job..Jims 33443-84 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Tappet Block Alignment Tool Sh BT Evo Late 77/L Use Two For Perfect Job..Jims 33443-84

MID-60735

$36.65

In Stock

Save $-36.65
/
Shipping calculated at checkout.
Tappet Block Alignment Tool Sh Bt Evo Late 77/L Use Two For Perfect Job..Jims 33443-84
  • Tapered shank is designed to provide perfect alignment with the threads
  • Use two to insure proper alignment
Jims
Aligns Big Twin Late 1976/1999 tappet block, all Evolution & Twin Cam lower rocker covers, cam support plate for Twin Cam models
Sold Each, Replaces HD# 33443
Torque Plates Twin Cam 88 & 96 3.75"-3.875" Jims 951 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Torque Plates Twin Cam 88 & 96 3.75"-3.875" Jims 951

MID-60826

$762.20

In Stock

Save $-762.20
/
Shipping calculated at checkout.
Torque Plates Twin Cam 88 & 96 3.75"-3.875" Jims 951
Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions when boring or honing aluminum cylinders. They easily adapt to conventional boring bars or a Sunnen type honing machine. These plates are drilled precisely for multiple applications use and can accommodate various bore sizes, with stock or oversize big bores. Kits are laser lettered for ease of use with torquing sequence and most sets don't require removal of ring dowels. Refer to chart for sizes and applications available.Jims
Use on Twin Cam 88, 96 with OEM bolt pattern, 1999/Later
Bore size 3.75 - 3.875
Torque Plates Twin Cam Big Bore 4"-4.060" Jims 930 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Torque Plates Twin Cam Big Bore 4"-4.060" Jims 930

MID-60825

$742.25

In Stock

Save $-742.25
/
Shipping calculated at checkout.
Torque Plates Twin Cam Big Bore 4"-4.060" Jims 930
Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions when boring or honing aluminum cylinders. They easily adapt to conventional boring bars or a Sunnen type honing machine. These plates are drilled precisely for multiple applications use and can accommodate various bore sizes, with stock or oversize big bores. Kits are laser lettered for ease of use with torquing sequence and most sets don't require removal of ring dowels. Refer to chart for sizes and applications available.Jims
Use on Twin Cam Big Bore Cylinders, Big Bore Cylinders with OEM bolt pattern 1999/Later
Bore size 4 - 4.060
V-Twin Manufacturing .310 Valve Guide Ream Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing .310 Valve Guide Ream

VT-16-0761

$179.86

In Stock

Save $-179.86
/
Shipping calculated at checkout.
V-Twin Manufacturing .310 Valve Guide Ream - Sold Each
Valve Guide Reams. Sold each. Size: .310
V-Twin Manufacturing .311 Valve Guide Ream Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing .311 Valve Guide Ream

VT-16-0762

$179.86

In Stock

Save $-179.86
/
Shipping calculated at checkout.
V-Twin Manufacturing .311 Valve Guide Ream - Sold Each
Valve Guide Reams. Sold each. Size: .311
V-Twin Manufacturing .376 Valve Guide Ream Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing .376 Valve Guide Ream

VT-16-0771

$146.91

In Stock

Save $-146.91
/
Shipping calculated at checkout.
V-Twin Manufacturing .376 Valve Guide Ream - Sold Each
Valve Guide Reams. Sold each. Size: .376
V-Twin Manufacturing .377 Valve Guide Ream Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing .377 Valve Guide Ream

VT-16-0772

$146.91

In Stock

Save $-146.91
/
Shipping calculated at checkout.
V-Twin Manufacturing .377 Valve Guide Ream - Sold Each
Valve Guide Reams. Sold each. Size: .377
V-Twin Manufacturing .378 Valve Guide Ream Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing .378 Valve Guide Ream

VT-16-0773

$179.86

In Stock

Save $-179.86
/
Shipping calculated at checkout.
V-Twin Manufacturing .378 Valve Guide Ream - Sold Each
Valve Guide Reams. Sold each. Size: .378
V-Twin Manufacturing .379 Valve Guide Ream Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing .379 Valve Guide Ream

VT-16-0774

$145.57

In Stock

Save $-145.57
/
Shipping calculated at checkout.
V-Twin Manufacturing .379 Valve Guide Ream - Sold Each
Valve Guide Reams. Sold each. Size: .379
V-Twin Manufacturing 1-4 x24 Tappet Black Align Screw Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1-4 x24 Tappet Black Align Screw

VT-16-0977

$11.86

In Stock

Save $-11.86
/
Shipping calculated at checkout.
V-Twin Manufacturing 1-4 x24 Tappet Black Align Screw - Set
Sifton Tappet Guide/Oil Pump Alignment Tool. Use to align Tappet guide to engine case on all Evo 1340 Big Twins and also aligns oil pump on TC-88 Big Twins. Also available in width 1/4 x 24 threads for after market crank