All

CYCLE VISIONS Chrome Rear Turn Signal Cover Plates, made in the usa, Steel, Pair, specific application, Harley 06-16 FX

• Covers the hole in the rear fender strut cover when removing the rear turn signals
• Made of steel and chrome plated

Cylinder Base/Crankcase Cover Dyna 06/L*Flt Flh 07/L*(Ex Cvo 110 Ci Eng)W/Hrdw,Chrome

• Adds a show chrome look to the left side of your engine
• Easy to install
• Includes hardware
• Compliments either black or silver engine finishes

V-FACTOR
Chrome Plated
Fits Dyna 2006/Later, FLT & FLH 2007/Later (except CVO models & models equipped with 110 CI engines)
Replaces HD# 32077-07
(Imported)

Cylinder Base/Crankcase Cover Fits Softail 2007/Later* Includes Mounting Hardware,Cp

• Adds a show chrome look to the left side of your engine
• Easy to install
• Includes hardware
• Compliments either black or silver engine finishes

V-FACTOR
Chrome Plated
Fits Softail 2007/Later
Replaces HD# 32042-07
(Imported)

Cylinder Base/Crankcase Cover Fits Sportster 2004/Later* Includes Mounting Hardware,Cp

• Adds a show chrome look to the left side of your engine
• Easy to install
• Includes hardware
• Compliments either black or silver engine finishes

V-FACTOR
Chrome Plated
Fits Sportster 2004/Later
Replaces HD# 32729-07
(Imported)

DRAG SPECIALTIES Chrome Lower Rear Belt Guard Cover, Harley 09-16 FL

• High-quality stamped-steel upper or lower rear belt guards
• Fit a variety of models
• Simple bolt-on installation

DRAG SPECIALTIES Chrome Sprocket Cover, Each, Harley 04 - 16 XL

• High-quality cast aluminum construction
• Available in chrome or polished finish
• Mount with existing OEM mounting hardware
• Sold each

DRAG SPECIALTIES Chrome Sprocket Cover, Each, Harley 91 - 03 XL

• High-quality cast aluminum construction
• Available in chrome or polished finish
• Mount with existing OEM mounting hardware
• Sold each

DRAG SPECIALTIES Gloss Black Clutch Cable Adjuster Cover, Harley 87-16 FX 86-16 FL 87 - 16 XL

• Replaces the rubber boot found on most clutch cables
• Two-piece design is easy to install or remove when clutch needs adjusting
• Fits 87-16 5- and 6-speed clutch cables

DRAG SPECIALTIES Plush Soft-Tie Covers, Soft-Tye, length 12", made in the usa, Pair

• Slide over existing 1" or 1.5" tie-down extensions to guard against scratching paint or chrome
• 12" long
• Sold in pairs
• Made in the U.S.A.

DRAG SPECIALTIES Polished Sprocket Cover, Each, Harley 04 - 16 XL

• High-quality cast aluminum construction
• Available in chrome or polished finish
• Mount with existing OEM mounting hardware
• Sold each

DRAG SPECIALTIES Polished Sprocket Cover, Each, Harley 82 - 90 XL

• High-quality cast aluminum construction
• Available in chrome or polished finish
• Mount with existing OEM mounting hardware
• Sold each

DRAG SPECIALTIES Steering Stem Bolt Cover, Chrome, Aluminum, specific application, Harley 87-05 FX 87 - 15 XL

• Billet aluminum construction with a chome-plated finish
• Fits over steering stem bolt
• Sold each

JOKER MACHINE Black Sprocket Cover, Harley 04 - 16 XL

• Give your bike that "race-tech" appearance with one of these trick sprocket covers
• CNC-milled out of 6061 T-6 billet aluminum to give you a much lighter cover than the heavy stock cast piece
• All stand-offs are CNC-machined and mounting hardware is included
• Available in your choice of black or clear anodized finishes
• Made in the U.S.A.

JOKER MACHINE Clear Anodized Sprocket Cover, Natural, Harley 04 - 16 XL

• Give your bike that "race-tech" appearance with one of these trick sprocket covers
• CNC-milled out of 6061 T-6 billet aluminum to give you a much lighter cover than the heavy stock cast piece
• All stand-offs are CNC-machined and mounting hardware is included
• Available in your choice of black or clear anodized finishes
• Made in the U.S.A.

PRO-ONE PERF.MFG. Oil Tank Mount Stud Covers, Chrome, Pair, specific application, Harley 86-99 FX 89-99 FL

• Fit the rubber mounts on Softail 89-99 oil tanks
• Show-chrome plated
• Sold in pairs

RSD Black Ops Pulley Cover, Harley 04 - 16 XL

• For use with RSD Tracker Front Pulley Guard or when stock pulley cover is removed
• Hides unsightly stock countershaft belt pulley
• CNC machined billet aluminum
• Stainless steel wire mesh
• Available in Contrast Cut, Black Ops or Machine Ops
• Contrast Cut finish starts with a polished pulley that has been black anodized, then recut to open up the design
• Black Ops finish features a machined surface treated through a proprietary military spec process for strength and hardness, then further machined and anodized for a subtle yet striking black-on-black contrast that is scratch, weather and damage resistant; it is the ultimate low-maintenance finish
• Machine Ops, RSD's newest finish, is a fusion of textured natural aluminum and detailed machining that exposes the true beauty of their aluminum alloy; they then dip the fresh machined parts in a slick clear anodize to protect the surface while keeping its raw aesthetic protected
• Hardware included
• Complements existing RSD sportster products
• Made in the U.S.A.

TERRY COMPONENTS Chrome Solenoid End Cover, 1.0kW, 2.0kW

• Constructed from chrome-plated steel

TODD'S CYCLE Black Shifter Spline Cover, Powder-Coated, Harley 83-16 FX 84-16 FL 87 - 94 XL

• CNC-machined billet aluminum
• Fit over the end of the shifter shaft when removing heel shifter
• Available in chrome or gloss black powder-coat
• Made in the U.S.A.

V-Twin Manufacturing Chrome Bolt Cap 116 Piece Cover Kit, FLSTSB 2009-UP, 94922-09 - Kit

Kit contains 116 pieces of chrome bolt cap covers constructed of ABS plastic.

OEM: 94922-09

FLSTSB 2009-UP

V-Twin Manufacturing Chrome Fork Lock Cover, FLHR 1994-2002, 71659-99 - Sold Each

Chrome fork lock cover pivots to allow access to fork lock.

OEM: 71659-99

FLHR 1994-2002

V-Twin Manufacturing Lower Fairing Trim Chrome, FLT 1986-1995, 14098-91 - Sold Each

Chrome lower trim is formed to cover cracked or peeling decals

OEM: 14098-91

FLT 1986-1995

V-Twin Manufacturing Lower Triple Tree Cover Chrome, FLT 2001-UP, 66050-03 - Sold Each

Chrome lower triple tree cover completely covers underside of tree.

OEM: 66050-03

FLT 2001-UP

V-Twin Manufacturing Motorcycle Windshield Deflectors Chrome fits 1983-Up, 58121-85B

- Set

Motorcycle Windshield Deflectors Chrome OEM No: 58121-85B Chrome windshield deflectors mount onto fork brackets. Fits: FLHT 1983-UP FLT 1983-UP FLHR 1983-UP UOM: 2 - PR Country of Origin: Imported

To