All

ALLOY ART Black Shooter Taillight Kit

• CNC-machined aluminum construction with mega-bright 1.25" dual-functions red LED clusters
• Quick-and-easy installation requires a 2" hole to be cut in bags
• Weather-tight light assemblies mount securely via an easy-to-use locking collar with rubber sealing gasket from the inside of the bag
• OEM style quick-disconnect electrical connectors for quick-and-easy bag removal
• Include two light assemblies, wiring with OEM-style electrical connectors and complete installation instructions
• Made in the U.S.A.

ALLOY ART Chrome Shooter Taillight Kit, Natural

• CNC-machined aluminum construction with mega-bright 1.25" dual-functions red LED clusters
• Quick-and-easy installation requires a 2" hole to be cut in bags
• Weather-tight light assemblies mount securely via an easy-to-use locking collar with rubber sealing gasket from the inside of the bag
• OEM style quick-disconnect electrical connectors for quick-and-easy bag removal
• Include two light assemblies, wiring with OEM-style electrical connectors and complete installation instructions
• Made in the U.S.A.

CHRIS PRODUCTS Chrome Taillight Assembly, White, Incandescent, DOT, Dual function, Red, made in the usa, number of bulbs 1, Each, Rear, specific application, Harley 73-98 FX 73-98 FL 73 - 98 XL

• Updated design
• Complete taillight assembly includes chrome base, Chris taillight lens, bulb, lens screws, lens gasket and terminal for ground wire
• For replacement bulbs, see page ???
• DOT compliant
• Made in the U.S.A.

EDDIE TROTTA DESIGNS Raw Weld-In LED Taillight Assembly, Natural, Dual function, made in the usa, Steel, Each, Rear, Oval

• Raw finished, steel assembly welds into most custom fenders
• Takes the hard work out of installing a custom flush taillight
• Measures 21/2" L x 1/2" W x 5/8" D
• Made in the U.S.A.

RUSS WERNIMONT DESIGNS Chrome L.E.D. Taillight/Turn Signal/License Plate Kit, LED, Dual function, Red, Aluminum, Fender-mount, Flat, Horizontal, Oval

• Chrome cast-aluminum license plate frame with an LED taillight and turn signal
• Brilliant starburst optics
• Three-color LED light system: red running/brake light, amber turn signals and white license plate light
• Accepts most 4" x 7" license plates
• Uses OEM plugs or can be spliced into existing wiring harness
• Requires the use of mounting pockets (sold separately)
• Can be used on OEM fenders, custom fenders or various custom applications
• Made in the U. S. A.

Taillight W/Turn Signals Custom App All Models,12V,Mtg Holes 2.5"Ctr...Cp Billet Alum

• CNC machined from billet aluminum
• This 12 volt taillight is the perfect complement for a at Bob style rear fender
• eatures built-in turn signals and includes a separate window that illuminates the license plate
• The taillight has a flat back and mounts on 2 1/2 centers
• 7 of taillight lead wire is included and the turn signals include 7 of wire
• Assembly measures 6 5/8 long x 3 tall x 1 13/16 thick

Note: This taillight assembly is not DOT approved and should be used accordingly. Due to the low amperage draw of the turn signals, to retain the blinker function we recommend using 15138 self-cancelling turn signal module with load equalizer or our 15137 turn signal load equalizer for models without self-cancelling systems.V-FACTOR
Chrome Plated Complete Taillightwith Turn Signals

Taillight,Beehive Stk Style Big Twin 1939/1946 W/12 V Bulb Chromed..Replaces Hd 68002-39T

• Many universal mounting applications
• Includes 12 volt bulb, rubber gasket for mounting and license bracket

Note: This taillight is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight
Fits 1939/1946 models & custom applications
Replaces HD# 68002-39T
(Imported)

Taillight,Custom Box Style For All Models 12 Volt Die Cast Chrome Plated

• Die cast housing with a flat back for easy mounting
• Drilled and tapped for use with ⁵/₁₆-18 mounting bolts on 2 centers
• Taillight measures 2 tall x 4 ¹/₄ wide and is 2 thick
• A clear license window is also provided
• Includes a 12 volt bulb with approximately 8 of lead wire

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight Assembly
(Imported)

Taillight,Led Curvature Style Uw/#11228,#11229,#11230,Or Cus Die Cast Cp 6"Lg X 1" W/Hardw

• The axle spacer/adjuster stop is incorporated into the license plate backing plate for a clean look
• Includes a special adapter that will allow for a ³/₄ O.D. axle or a 1 O.D. axle
• Hidden allen head lock screws secure the vertically mounted license plate from the backside furnishing you with a smooth, boltless look
• Mounts on left side (replaces axle spacer adjuster stop)
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Replacement Taillight Housing with Lens, LED light board, wires & mounting hardware
Fits Softail 1986/1999

Taillight/Lic Fender Mt LED Fits All 4X7 License Plates Cp Billet Alum Fits Fdr Profile

• Hidden allen head lock screws secure the license plate from the back furnishing you with a smooth, boltless look
• Included is a rubber mounting block and hardware for a no hassle installation
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: This taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License slides in from bottom
Fits flat or curved rear fender

Taillight/Lic Mt Side Axle Lh St 86/99,Uw 3/4" Or 1"Od Axle Horizontal Mt,Led Lights,Cp

• Includes a special adapter that will allow for a ³/₄ O.D. axle or a 1 O.D. axle
• The axle spacer/adjuster stop is incorporated into the license plate backing plate mount for a clean look
• Hidden allen head lock screws secure the license plate from the backside furnishing you with a smooth, boltless look
• Mounts on left side (replaces axle spacer adjuster stop)
• 20 red LED lights for high output and low draw
• CNC machined from billet aluminum
• Accepts 7 x 4 license plate
• Hidden wiring

Note: Taillight assembly is not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated 12 volt LED style
License plate slides in from bottom
Fits Softail 1986/1999
(Imported)

Taillight/License Mount Asy Fxst,Fxwg 1980/1999,Cus Fatbob Fenders Bulb Type

• Steel license mount similar to the OE type, but designed for our custom taillight
• 12 volt taillight fits snugly under the at Bob rear fenders for a matching contour
• Can also be used for custom applications when used with our 22004 or our 22009 7 wide at Bob rear fenders

Note: These taillights are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Taillight/ License Mount Kit with dual contact bulb (as shown)
Fits XWG & XST models 1980/1999
(Imported)

TODD'S CYCLE Black/Red Martini Brake/Taillight, Anodized

• CNC-machined aluminum
• High output dual-function red LED cluster
• Mounts using an included 5/16" hollow bolt
• Available in black anodized or chrome finish
• 21/8" diameter x 2" deep
• Match Martini headlights
• Sold each
• Made in the U.S.A.

Tri-Bar Red LED Light W/Smoke Lens,06/L* Flhx,Also Fits 99/L* Flhr/Flt If #22980 Used

• Tri-bar running lights with high intensity red LEDs
• See below for availability of len's color
• Triple light bands are dual function: lights glow in running mode and increase in intensity when the brake is applied
• Kits include all the needed wiring, hardware and OE loom connectors

V-FACTOR
Red LED with smoke lens
Fits FLHX 2006/Later
Also fits FLHR/LT models 1999/Later when used in conjunction with the 22980 rear fender extension
(Imported)

V-Twin Manufacturing 12V Lamp Chrome Die Cast Box Taillamp - Sold Each

Chrome die cast box tail lamp includes a red lens and a clear 12 volt 21/6 candle power bulb.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Brake Light Switch Mounting Kit - Sold Each
Brake light switch mount kit includes fasteners to mount the brake light switch. Fits: EL 1939-1940 FL 1941-1957 UL 1939-1948 UOM: 1 - EA Country of Origin: USA

V-Twin Manufacturing Chrome Bates Bobber Tail Lamp Assembly - Sold Each
Tail lamp assembly is chrome and constructed by a gravity cast process. This tail lamp assembly features a glass lens and mounts on the fender. Brought back by Wyatt Gatling. Order tail lamp mount gasket separately. Fits: FL 1941-1947

V-Twin Manufacturing Chrome Beehive Style Tail Lamp, 68002-39 - Sold Each
Chrome Beehive Style Tail Lamp OEM No: 68002-39 Chrome beehive 12 volt tail lamp with gasket and plate bracket. Has a stamped steel body. *NOTE: For show or decorative use only and are not D.O.T. approved. Fits: Custom

V-Twin Manufacturing Chrome Radii Taillight Assembly - Sold Each

Radii chrome tail lamp features full LED matrix with amber turn signal bulb built in.
Measures 6" long x 2-1/2" wide at center.

Custom application

V-Twin Manufacturing Chrome Rim Stock Type Taillight, 1955-72 FL-XL - Sold Each

Chrome stock type tail lamp lens trim rim.

OEM: 68086-55

FL 1955-1972
XL 1955-1972
FX 1971-1972

V-Twin Manufacturing Chrome. Bobber Tailmp - Sold Each

Sparto tail lamp chrome, bulb type mount to fender.

Custom application

V-Twin Manufacturing Clear LED Lamp Fresno Chrome Teardrop Taillamp Assembly - Sold Each

Chrome die cast tear drop fresno LED tail lamp with clear lens with stainless steel license plate bracket and a red LED bulb.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

Tech Note:

Recomm

V-Twin Manufacturing Complete Chrome 12 V Sport Taillight Assembly - Sold Each

Chrome cateye sport lamp with built in license plate bracket. Assembly includes a 12 volt 23/8 watt red bulb and a clear lens.
Use with mount gasket. *NOTE: For show or decorative use only and is no

V-Twin Manufacturing Complete Chrome for Stock Type Taillight, 1955-72 FL-XL - Sold Each

Chrome tail lamp stock style includes plastic red lens, a 12 volt 23/8 watt clear bulb, lens housing and internals.
*NOTE: For show or decorative use only and is not D.O.T. approved.
OEM: 68010-64B

FL 1955-1972
XL 1955-1972
FX 1971-1

V-Twin Manufacturing Complete Chrome Sport Taillight Assembly - Sold Each

Small chrome Lucas sport lamp with built in plate bracket. Assembly includes a 12 volt 23/8 watt clear bulb and a red lens.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Complete Chrome Sport Taillight Assembly - Sold Each

Chrome sport lamp assembly with large Lucas lamp and built in plate bracket. Assembly includes a 12 volt 23/8 watt clear bulb and a red lens.
*NOTE: For show or decorative use only and is not D.O.T. approved.

Custom application

V-Twin Manufacturing Complete LED Light, 1973-92 - Sold Each

Red LED tail lamp includes chrome base, red lens, wire and LED.

FX 1973-1984
FL 1973-1984
XL 1973-1998
FXR 1982-1994
FLT 1979-1998
FXD 1991-1998

V-Twin Manufacturing Complete Light, 1973-92 - Sold Each

Chrome stock tail lamp for bulb.
*NOTE: For show or decorative use only and are not D.O.T. approved.

FX 1973-1984
FL 1973-1984
XL 1973-1998
FXR 1982-1994
FLT 1979-1998
FXD 1991-1998

Tech Note:

Suggested to use with