All

20 products

20 products

Sold Out
Engine Gear Shaft, Big Twin 1958/1972 Rpls Hd 24006-58 Jims
Mid-USA
$157.25
Sold Out
Engine Gear Shaft, Big Twin 1973/Early 1981 Rpls Hd 24006-73 Jims
Mid-USA
$157.25
Engine Gear Shaft, Big Twin Late 1981/1986 Rpls Hd 24006-80 Jims
Mid-USA
$157.25
Engine Sprocket Shaft 45" Models 1929/1973 Rpls Hd 24000-29
Mid-USA
$114.10
Engine Sprocket Shaft Big Twin 1956/1964 Rpls Hd 24001-56
Mid-USA
$162.75
Engine Sprocket Shaft Big Twin 1970/1971 Rpls Hd 24001-70
Mid-USA
$172.10
Engine Sprocket Shaft Big Twin 1972/1981 Rpls Hd 24001-72
Mid-USA
$172.10
Engine Sprocket Shaft Sportster Late 1981/1985 Rpls Hd 24000-80
Mid-USA
$152.50
Engine Sprocket Shaft, BT Ohv & Sv 1930/1954 All Mdls Replaces Hd 24001-30... Jims
Mid-USA
$110.00
S&S CYCLE Pinion Shaft Assembly, Also Fits 84-99 Models With S&S Flywheels., Harley 81-86 FX 81-86 FL
S&S Cycle
$183.95
V-Twin Manufacturing Big Twin Pinion Shafts, 74&80, Replica, 1973-80
V-Twin Manufacturing
$66.55
V-Twin Manufacturing Big Twin Sprocket Shafts, Eastern, 80, L1981-86
V-Twin Manufacturing
$109.18
V-Twin Manufacturing Eastern Pinion Shaft for Big Twin, 1987-89
V-Twin Manufacturing
$96.51
V-Twin Manufacturing Engine Pinion Shaft, XL 1957-1976, 24005-57
V-Twin Manufacturing
$113.46
V-Twin Manufacturing Pinion Shaft w-Race, 1977-E81 XL
V-Twin Manufacturing
$98.09
V-Twin Manufacturing Pinion Shaft, L1981-85 XL
V-Twin Manufacturing
$113.94
V-Twin Manufacturing Replica Pinion Shaft, 24006-87
V-Twin Manufacturing
$49.88
V-Twin Manufacturing Sprocket Shaft, 1957-76 XL
V-Twin Manufacturing
$79.08
V-Twin Manufacturing Sprocket Shaft, 1977-E81 XL
V-Twin Manufacturing
$79.08
V-Twin Manufacturing Sprocket Shaft, L1981-85 XL
V-Twin Manufacturing
$92.23
Engine Gear Shaft, Big Twin Late 1981/1986 Rpls Hd 24006-80 Jims Harley Mid-USA - K and G Cycles
Mid-USA

Engine Gear Shaft, Big Twin Late 1981/1986 Rpls Hd 24006-80 Jims

MID-65174

$157.25

In Stock

Save $-157.25
/
Shipping calculated at checkout.
Engine Gear Shaft, Big Twin Late 1981/1986 Rpls Hd 24006-80 Jims
We carry only USA made gear or pinion shafts and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our flywheel shafts include: special thread annealing to withstand extra nut torque, low friction 16 micron finish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003 and super tough aircraft rated Durabar 60® steel. Our flywheel shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 micron surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. Shaft. Big Twin Late 1981/1986.
Engine Sprocket Shaft 45" Models 1929/1973 Rpls Hd 24000-29 Harley Mid-USA - K and G Cycles
Mid-USA

Engine Sprocket Shaft 45" Models 1929/1973 Rpls Hd 24000-29

MID-65167

$114.10

In Stock

Save $-114.10
/
Shipping calculated at checkout.
Engine Sprocket Shaft 45" Models 1929/1973 Rpls Hd 24000-29
We carry only USA made sprocket shafts and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our sprocket shafts is special thread annealing to withstand extra nut torque, low friction 16 microfinish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003 and super tough, aircraft rated Durabar 60™ steel. Our sprocket shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. Jims
Sprocket Shaft
Fits 45 models 1929/1973
Engine Sprocket Shaft Big Twin 1956/1964 Rpls Hd 24001-56 Harley Mid-USA - K and G Cycles
Mid-USA

Engine Sprocket Shaft Big Twin 1956/1964 Rpls Hd 24001-56

MID-65160

$162.75

In Stock

Save $-162.75
/
Shipping calculated at checkout.
Engine Sprocket Shaft Big Twin 1956/1964 Rpls Hd 24001-56
We carry only USA made sprocket shafts and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our sprocket shafts is special thread annealing to withstand extra nut torque, low friction 16 microfinish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003 and super tough, aircraft rated Durabar 60™ steel. Our sprocket shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. Jims
Sprocket Shaft
Fits Big Twin Late 1956/1964
Replaces HD# 24001-56
Engine Sprocket Shaft Big Twin 1970/1971 Rpls Hd 24001-70 Harley Mid-USA - K and G Cycles
Mid-USA

Engine Sprocket Shaft Big Twin 1970/1971 Rpls Hd 24001-70

MID-65165

$172.10

In Stock

Save $-172.10
/
Shipping calculated at checkout.
Engine Sprocket Shaft Big Twin 1970/1971 Rpls Hd 24001-70
We carry only USA made sprocket shafts and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our sprocket shafts is special thread annealing to withstand extra nut torque, low friction 16 microfinish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003 and super tough, aircraft rated Durabar 60™ steel. Our sprocket shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. Jims
Sprocket Shaft
Fits Big Twin 1970/1971
Replaces HD# 24001-70
Engine Sprocket Shaft Big Twin 1972/1981 Rpls Hd 24001-72 Harley Mid-USA - K and G Cycles
Mid-USA

Engine Sprocket Shaft Big Twin 1972/1981 Rpls Hd 24001-72

MID-65166

$172.10

In Stock

Save $-172.10
/
Shipping calculated at checkout.
Engine Sprocket Shaft Big Twin 1972/1981 Rpls Hd 24001-72
We carry only USA made sprocket shafts and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our sprocket shafts is special thread annealing to withstand extra nut torque, low friction 16 microfinish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003 and super tough, aircraft rated Durabar 60™ steel. Our sprocket shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. Jims
Sprocket Shaft
Fits Big Twin 1972/1981
Replaces HD# 24001-72
Engine Sprocket Shaft Sportster Late 1981/1985 Rpls Hd 24000-80 Harley Mid-USA - K and G Cycles
Mid-USA

Engine Sprocket Shaft Sportster Late 1981/1985 Rpls Hd 24000-80

MID-65170

$152.50

In Stock

Save $-152.50
/
Shipping calculated at checkout.
Engine Sprocket Shaft Sportster Late 1981/1985 Rpls Hd 24000-80
We carry only USA made sprocket shafts and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our sprocket shafts is special thread annealing to withstand extra nut torque, low friction 16 microfinish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003 and super tough, aircraft rated Durabar 60™ steel. Our sprocket shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. Jims
Sprocket Shaft
Fits Sportster Late 1981/1985
Replaces HD# 24000-80
Engine Sprocket Shaft, BT Ohv & Sv 1930/1954 All Mdls Replaces Hd 24001-30... Jims Harley Mid-USA - K and G Cycles
Mid-USA

Engine Sprocket Shaft, BT Ohv & Sv 1930/1954 All Mdls Replaces Hd 24001-30... Jims

MID-65159

$110.00

In Stock

Save $-110.00
/
Shipping calculated at checkout.
Engine Sprocket Shaft, Bt Ohv & Sv 1930/1954 All Mdls Replaces Hd 24001-30... Jims
We carry only USA made sprocket shafts and hardware. These are manufactured to exceed OEM specifications. Advanced features of all of our sprocket shafts is special thread annealing to withstand extra nut torque, low friction 16 microfinish bearing surfaces, ultra hard 60-63 Rockwell finish, computer machined tapers that guarantee concentricity within .0003 and super tough, aircraft rated Durabar 60™ steel. Our sprocket shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005. This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes and heat treated to make these nuts the toughest and best available on the market. All these products combined give you the finest parts choice in the industry. Jims
Sprocket Shaft
Fits Big Twin 1930/1954
Replaces HD# 24001-30
S&S CYCLE Pinion Shaft Assembly, Also Fits 84-99 Models With S&S Flywheels., Harley 81-86 FX 81-86 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE Pinion Shaft Assembly, Also Fits 84-99 Models With S&S Flywheels., Harley 81-86 FX 81-86 FL

DS-09210168

$183.95

In Stock

Save $-183.95
/
Shipping calculated at checkout.
S&S CYCLE Pinion Shaft Assembly, Also Fits 84-99 Models With S&S Flywheels., Harley 81-86 FX 81-86 FL
  • For use with standard bearing diameter
  • Made in the U.S.A.
V-Twin Manufacturing Big Twin Pinion Shafts, 74&80, Replica, 1973-80 Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Big Twin Pinion Shafts, 74&80, Replica, 1973-80

VT-10-0875

$66.55

In Stock

Save $-66.55
/
Shipping calculated at checkout.
V-Twin Manufacturing Big Twin Pinion Shafts, 74&80, Replica, 1973-80 - Sold Each

Replica pinion shaft

OEM: 24006-73


FL 1973-1980
FX 1973-1980
FLT 1979-1980
V-Twin Manufacturing Big Twin Sprocket Shafts, Eastern, 80, L1981-86 Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Big Twin Sprocket Shafts, Eastern, 80, L1981-86

VT-10-0416

$109.18

In Stock

Save $-109.18
/
Shipping calculated at checkout.
V-Twin Manufacturing Big Twin Sprocket Shafts, Eastern, 80, L1981-86 - Sold Each

Machined and hardened to factory specifications.

OEM: 23909-80


FL 1981-1984
FX 1981-1984
FLT 1979-1986
FXST 1984-1986
FLST 1986
FXR 1982-1986
V-Twin Manufacturing Eastern Pinion Shaft for Big Twin, 1987-89 Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Eastern Pinion Shaft for Big Twin, 1987-89

VT-10-0432

$96.51

In Stock

Save $-96.51
/
Shipping calculated at checkout.
V-Twin Manufacturing Eastern Pinion Shaft for Big Twin, 1987-89 - Sold Each

Machined and ground to factory specifications.

OEM: 24006-87


FXST 1987-1989
FLST 1987-1989
FLT 1987-1989
FXR 1987-1989
V-Twin Manufacturing Engine Pinion Shaft, XL 1957-1976, 24005-57 Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Engine Pinion Shaft, XL 1957-1976, 24005-57

VT-10-0404

$113.46

In Stock

Save $-113.46
/
Shipping calculated at checkout.
V-Twin Manufacturing Engine Pinion Shaft, XL 1957-1976, 24005-57 - Sold Each

Precision ground for correct fitment.

OEM: 24005-57


XL 1957-1976
V-Twin Manufacturing Pinion Shaft w-Race, 1977-E81 XL Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Pinion Shaft w-Race, 1977-E81 XL

VT-10-0405

$98.09

In Stock

Save $-98.09
/
Shipping calculated at checkout.
V-Twin Manufacturing Pinion Shaft w-Race, 1977-E81 XL - Sold Each

Precision ground for correct fitment.

OEM: 24008-75A


XL 1977-1981 Early 1981
V-Twin Manufacturing Pinion Shaft, L1981-85 XL Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Pinion Shaft, L1981-85 XL

VT-10-0399

$113.94

In Stock

Save $-113.94
/
Shipping calculated at checkout.
V-Twin Manufacturing Pinion Shaft, L1981-85 XL - Sold Each

Precision ground for correct fitment.

OEM: 24005-80


XL 1981-1985
V-Twin Manufacturing Replica Pinion Shaft, 24006-87 Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Replica Pinion Shaft, 24006-87

VT-10-0889

$49.88

In Stock

Save $-49.88
/
Shipping calculated at checkout.
V-Twin Manufacturing Replica Pinion Shaft, 24006-87 - Sold Each
OEM No: 24006-87 Machined and ground to factory specifications. Fits: FXST 1987-1989 FLST 1987-1989 FLT 1987-1989 FXR 1987-1989 UOM: 1 - EA Country of Origin: Imported
V-Twin Manufacturing Sprocket Shaft, 1957-76 XL Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Sprocket Shaft, 1957-76 XL

VT-10-0420

$79.08

In Stock

Save $-79.08
/
Shipping calculated at checkout.
V-Twin Manufacturing Sprocket Shaft, 1957-76 XL - Sold Each

Sprocket shaft are machined and hardened to factory specifications.

OEM: 24000-57


XL 1957-1976
V-Twin Manufacturing Sprocket Shaft, 1977-E81 XL Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Sprocket Shaft, 1977-E81 XL

VT-10-0421

$79.08

In Stock

Save $-79.08
/
Shipping calculated at checkout.
V-Twin Manufacturing Sprocket Shaft, 1977-E81 XL - Sold Each

Machined and hardened to factory specifications.

OEM: 24000-75


XL 1977-1981 Early 1981
V-Twin Manufacturing Sprocket Shaft, L1981-85 XL Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Sprocket Shaft, L1981-85 XL

VT-10-0434

$92.23

In Stock

Save $-92.23
/
Shipping calculated at checkout.
V-Twin Manufacturing Sprocket Shaft, L1981-85 XL - Sold Each

Sprocket shaft is machined and hardened to factory specifica tions.

OEM: 24000-80


XL 1981-1986 Late 1981