All

ACCUTRONIX Black Side Mount License Plate Assembly, Anodized, Harley 04 - 15 XL

• Made from 6061 T-6 billet aluminum
• Assemblies for XL models feature an axle mount design; assemblies for Street models have a shock mount design
• Can be mounted vertically or horizontally
• Includes a bright LED tag light
• Available in chrome or black anodized
• Made in the U.S.A.

COVINGTONS Gloss Black License Plate Frame

• CNC machined from billet aluminum
• Accepts most 4" x 7" license plates
• Made in the U.S.A.

Curved License Plate Frame,Blk Touring Models 2006/2009 Rpls Hd 67900059

• These curved license plate frames are shaped to hug the contour of the rear fenders of Touring models
• Replaces the OEM frame and requires no re-wiring or drilling

V-FACTOR
Black Finish
Fits Touring models 2006/2009
Replaces HD# 67900059

Curved License Plate Frame,Blk Touring Models 2010/Later* Rpls Hd 67900058

• These curved license plate frames are shaped to hug the contour of the rear fenders of Touring models
• Replaces the OEM frame and requires no re-wiring or drilling

V-FACTOR
Black Finish
Fits Touring models 2010/Later
Replaces HD# 67900058

Curved License Plate Frame,Cp Touring Models 2006/2009 Rpls Hd 67900056

• These curved license plate frames are shaped to hug the contour of the rear fenders of Touring models
• Replaces the OEM frame and requires no re-wiring or drilling

V-FACTOR
Chrome Plated Finish
Fits Touring models 2006/2009
Replaces HD# 67900056

Curved License Plate Frame,Cp Touring Models 2010/Later* Rpls Hd 67900008

• These curved license plate frames are shaped to hug the contour of the rear fenders of Touring models
• Replaces the OEM frame and requires no re-wiring or drilling

V-FACTOR
Chrome Plated Finish
Fits Touring models 2010/Later
Replaces HD# 67900008

Lic Mt W/Backing Plate,Chrome Bt Spt W/3 Hole Mt Pattern Low Profile Uw/4"X7"License Plate

• Includes two rubber spacers to control vibration and angle of plate
• OE 3 hole type mounting with hardware
• May also be adapted to many top of fender universal applications
• 7 x 4 license plate frame

V-FACTOR
Chrome Plated
Fits Big Twin & Sportster 1973/Later with 3 hole mount pattern
(Imported)

License Backing Plate,Louvered Fits All 4"X7" Plates Chromed Steel Replaces Hd 59899-88T

• This stamped steel backing plate not only hides the ugly side of your license plate, it also reinforces the flimsy aluminum license plates that are issues now a days and helps keep them from vibrating apart
• FitsHarley-Davidson^® OEM license mounts and most custom applications
• Measures 7 x 4 ¹/₄ overall with mount hole spacing 5 ³/₄ X 2 ³/₄ center to center

V-FACTOR
Chrome Plated Plate
Fits all 7 x 4 license plates
Replaces HD# 59899-88T

License Bracket, Layback Big Twin Flt 1999/Later* Rpls. Hd# 53385-00
V-FACTOR
Chrome Plated Mount
Fits Touring Models 1999/Later
Replaces HD# 53385-00

License Frame,Live To Ride Cp Fits All 4" X 7"License Plates Chrome Plated..Die Cast

• Get going in style with this beautiful license plate frames
• Die cast frame featrues the embossed eagle with black epoxy Live to Ride
• Measures 7 1/4 x 5 1/4 overall
• Mount hole spacing is 5 3/4 x 2 3/4 center to center
• Sold Each

V-FACTOR
Chrome Plated rame
Fits all 7 x 4 license plates
(Imported)

License Mount W/Backing Plate Fits Any Fender,Curved Style Uw 7"X 4"Plate,3 Hole Mount,Cp

• Two piece assembly with a chrome aluminum license plate frame and black steel backing plate
• Includes rubber spacer to control vibration
• OE type 3 hole mounting
• 7 x 4 license plate frame

V-FACTOR
Chrome Plated rame with Black Backing Plate
Fits any fender
(Imported)

License Plate Brkt Bumper Touring Models 2009/Later* Rpls Hd 60909-09

• High quality rubber license plate bracket bumper for Touring models
• Sold each

V-FACTOR
Black License Plate Bracket Bumper
Fits Touring Models 2009/Later
Replaces HD# 60909-09

License Plate Frame,Black Fits All 4"X7" Plates Die Cast

• Die cast aluminum
• Measures 7 1/4 x 4 1/4 overall with mount hole spacing
• Mount hole spacing is 5 3/4 x 2 3/4 center to center
• See below for availability of license plate finishes

V-FACTOR
Black rame
Fits all 7 x 4 license plates

License Plate Frame,Chain Cp Fits All 4"X 7" License Plates Die Cast Chrome Russell R13023

• Die cast frame is rugged and unique for the custom enthusiast
• Mount hole spacing is 5 ³/₄ x 2 ³/₄ center to center

Russell
Chrome Plated rame
Fits all 7 x 4 license plates

License Plate Frame,Die Cast Fits All 4"X7" License Plates Die Cast Chrome Plated

• Die cast aluminum
• Measures 7 1/4 x 4 1/4 overall with mount hole spacing
• Mount hole spacing is 5 3/4 x 2 3/4 center to center
• See below for availability of license plate finishes

V-FACTOR
Chrome Plated rame
Fits all 7 x 4 license plates

License Plate Frame,Eagle Fits All 4"X7" License Plates Die Cast Chrome Plated

• Die cast Eagle rame with USA under eagle's breast
• Measures 7 ¹/₄ x 5
• Mount hole spacing is 5 ³/₄ x 2 ³/₄ center to center

V-FACTOR
Chrome Plated rame
Fits all 7 x 4 license plates
(Imported)

Steel License Plate Bracket,Cp Touring Models 2009/Later* Rpls Hd 69380-09Bhp

• High quality steel license backing plate in finishes as listed
• Replace the stock factory plastic part that is prone to cracking

V-FACTOR
Chrome Plated Steel Bracket
Fits Touring Models 2009/Later
Replaces HD# 69380-09BHP

Steel License Plate Brkt,Black Touring Models 2009/Later* Rpls Hd 69380-09Bhp

• High quality steel license backing plate in finishes as listed
• Replace the stock factory plastic part that is prone to cracking

V-FACTOR
Black Steel Bracket
Fits Touring Models 2009/Later
Replaces HD# 69380-09BHP

Taillight Mount,Tombstone Kit To Adapt To Fl Style Rr Fender With 73/98 Taillight Mount Cp
These Tombstone Taillight Kits include a mount kit that will simplify installation on the L style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157 or our 11801 dual contact incandescent bulb. The LED type uses 45 separate red LEDs for the brake/taillight function and 3 blue LEDs to illuminate the license plate. The taillight assembly is die cast for strength and the fender adapter mount is stamped steel. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models.

Note: These taillights are not DOT apporved and should be used accordingly.V-FACTOR
Chrome Plated Mount Kit only (includes fender gasket)
Fits L style rear fenders 1973/1998

Taillight/License Mount,Adj Fits Fatbob Style Fender 7.5" To 9" Wide Chrome Plated

• Use this adjustable taillight/license mounting kit to finish your custom wide fender, wheel and tire additions
• Use 11215 taillight for that super custom look

V-FACTOR
Chrome Plated Mount
Fits at Bob style fender 7 ¹/₂ to 9 wide, (Imported)

Taillight/License Mount,Custom Fxwg,Fxst 80/99 W/7" Wide Fdr Chrome Plated Steel

• Steel custom taillight bracket and license plate mount kits fit up under at Bob style rear fenders
• Will accept most custom taillights

V-FACTOR
Chrome Plated Kit
Fits XWG & XST 1980/1999 with 7 wide fenders
(Imported)

Taillight/License Mt .120"Th Fxwg,Fxst 1980/1999 & Cus 7" Fat Bob Fdr Heavy Duty Mt Cp

• Your choice of a a standard duty mount or a heavy duty adjustable tilt mount
• Your choice of bulb type or LED (light emitting diode) type lighting for the taillight
• The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb
• The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws
• These kits fit snugly under the fender and the taillight follows the contour of the fender

Note: These taillight assemblies are not DOT approved and should be used accordingly.V-FACTOR
Chrome Plated Replacement Heavy Duty Mount with slotted mounting hole for adjustment of angle (.120 thick>
Fits XWG & XST 1980/1999. Also fits standard width (7) custom at Bob style rear fenders, such as our 22004 or 22009
(Imported)

V-Twin Manufacturing 2 Bolt Chrome License Plate Bracket, 1955-72 - Sold Each

Chrome 2 bolt license plate bracket for fender mounting.

OEM: 59995-55A

FL 1955-1972
FX 1971-1972
XL 1955-1972

V-Twin Manufacturing 3 Bolt Chrome License Plate Bracket, 1973-up - Sold Each

Chrome 3 bolt license plate bracket for fender mounting.

OEM: 59983-75

FX 1973-1984
FXR 1982-1994
FXD 1991-UP
XL 1973-UP

V-Twin Manufacturing 4" x 7" Indian Motorcycle License Plate Frame - Sold Each
Indian Motorcycle License Plate Frame License Plate Frame Chrome license plate frame with an Indian design for 4" x 7" plates is constructed of aluminum. Fits: Custom application to fit 4" x 7" plates. UOM:

V-Twin Manufacturing 4"x7" Billet License Plate Frame - Sold Each

Chrome billet 4 thorn style frame measures 4" x 7" with milled accent.

Custom application for 4" x 7" license plate

V-Twin Manufacturing Billet Clamp On Side License Flat - Sold Each

Billet clamp on bracket will accept 3 bolt flat vertical plate unit.

Custom application

V-Twin Manufacturing Billet License Plate Bracket Bracket Set - Kit

License plate bar eliminator bracket set allows the license plate support tube to be removed and will still allows the stock saddlebag support brackets to be used. Sold in pairs.

FLT 1997-2008

V-Twin Manufacturing Billet License Plate Bracket Plate Holder - Sold Each

Chrome billet license plate holder measures 7" x 4". Bracket set is included.

FLT 1991-2008
FLH 1978-1984
FLST 1986-2008

V-Twin Manufacturing Billet License Plate Frame - Sold Each

Chrome billet frame with hidden mounts.
Blind mount holes are 6-3/8" horizontally from center to center and 3-3/8" vertical center to center.

Custom application for 4-1/4" x 7-1/4" license plate.

V-Twin Manufacturing Black License Plate Blank - Sold Each

Black curved style license plate frame bracket mounts to 3 hole tag mount on stock fenders.

Custom application for 4" X 7" license plate

V-Twin Manufacturing Black Tombstone License Plate Bracket - Sold Each

Black license plate bracket for tombstone tail lamp.

FL 1947-1954